{"title":"AS568 200 Series White PTFE O-Rings","description":"\u003cp\u003eAS568 200 series (dash numbers -2xx) o-rings in White PTFE. Each listing gives the dash number, actual ID and cross-section in inches and millimetres, durometer and temperature range.\u003c\/p\u003e","products":[{"product_id":"as568-202-white-ptfe-o-ring-1-4in-id-x-1-8in-cs","title":"AS568-202 White PTFE O-Ring, 1\/4\" ID x 1\/8\" CS (0.234\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-202 5.94mm ID x 3.53mm CS (0.234\" x 0.139\") size, molded in White PTFE. Its outside diameter is 13mm (0.512\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5.94 mm \/ 0.234 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e13 mm \/ 0.512 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-202 5.94mm ID x 3.53mm CS (0.234\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-202 5.94mm ID x 3.53mm CS (0.234\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853479882957,"sku":"OR.202.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853479915725,"sku":"OR.202.2.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853479948493,"sku":"OR.202.3.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_a8caff83-07cf-4424-8af4-cb460734a86c.jpg?v=1794348338"},{"product_id":"as568-203-white-ptfe-o-ring-5-16in-id-x-1-8in-cs","title":"AS568-203 White PTFE O-Ring, 5\/16\" ID x 1\/8\" CS (0.296\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-203 7.52mm ID x 3.53mm CS (0.296\" x 0.139\") size, molded in White PTFE. Its outside diameter is 14.58mm (0.574\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.52 mm \/ 0.296 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14.58 mm \/ 0.574 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-203 7.52mm ID x 3.53mm CS (0.296\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-203 7.52mm ID x 3.53mm CS (0.296\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853480571085,"sku":"OR.203.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853480603853,"sku":"OR.203.2.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853480636621,"sku":"OR.203.3.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_b053ef1f-2ad5-4b56-a184-a66a31206515.jpg?v=1794348347"},{"product_id":"as568-204-white-ptfe-o-ring-3-8in-id-x-1-8in-cs","title":"AS568-204 White PTFE O-Ring, 3\/8\" ID x 1\/8\" CS (0.359\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-204 9.12mm ID x 3.53mm CS (0.359\" x 0.139\") size, molded in White PTFE. Its outside diameter is 16.18mm (0.637\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-204\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9.12 mm \/ 0.359 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e16.18 mm \/ 0.637 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-204 9.12mm ID x 3.53mm CS (0.359\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-204 9.12mm ID x 3.53mm CS (0.359\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853481193677,"sku":"OR.204.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853481226445,"sku":"OR.204.2.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853481259213,"sku":"OR.204.3.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_31c3a854-2f51-4ef5-b79a-a00a2d4ddfb2.jpg?v=1794348357"},{"product_id":"as568-205-white-ptfe-o-ring-7-16in-id-x-1-8in-cs","title":"AS568-205 White PTFE O-Ring, 7\/16\" ID x 1\/8\" CS (0.421\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-205 10.69mm ID x 3.53mm CS (0.421\" x 0.139\") size, molded in White PTFE. Its outside diameter is 17.75mm (0.699\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10.69 mm \/ 0.421 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e17.75 mm \/ 0.699 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-205 10.69mm ID x 3.53mm CS (0.421\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-205 10.69mm ID x 3.53mm CS (0.421\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853481849037,"sku":"OR.205.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853481881805,"sku":"OR.205.2.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853481914573,"sku":"OR.205.3.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_88c4ca60-0c97-4873-b717-863ce40da1fa.jpg?v=1794348365"},{"product_id":"as568-206-white-ptfe-o-ring-1-2in-id-x-1-8in-cs","title":"AS568-206 White PTFE O-Ring, 1\/2\" ID x 1\/8\" CS (0.484\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-206 12.29mm ID x 3.53mm CS (0.484\" x 0.139\") size, molded in White PTFE. Its outside diameter is 19.35mm (0.762\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12.29 mm \/ 0.484 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e19.35 mm \/ 0.762 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-206 12.29mm ID x 3.53mm CS (0.484\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-206 12.29mm ID x 3.53mm CS (0.484\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853482537165,"sku":"OR.206.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853482569933,"sku":"OR.206.2.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853482602701,"sku":"OR.206.3.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_29da78bd-2fba-47a9-836e-687a51d61d49.jpg?v=1794348376"},{"product_id":"as568-207-white-ptfe-o-ring-9-16in-id-x-1-8in-cs","title":"AS568-207 White PTFE O-Ring, 9\/16\" ID x 1\/8\" CS (0.546\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-207 13.87mm ID x 3.53mm CS (0.546\" x 0.139\") size, molded in White PTFE. Its outside diameter is 20.93mm (0.824\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e13.87 mm \/ 0.546 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e20.93 mm \/ 0.824 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-207 13.87mm ID x 3.53mm CS (0.546\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-207 13.87mm ID x 3.53mm CS (0.546\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853483192525,"sku":"OR.207.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853483225293,"sku":"OR.207.2.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853483258061,"sku":"OR.207.3.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_856f41d9-81c1-4108-9d1b-0212ae711266.jpg?v=1794348385"},{"product_id":"as568-208-white-ptfe-o-ring-5-8in-id-x-1-8in-cs","title":"AS568-208 White PTFE O-Ring, 5\/8\" ID x 1\/8\" CS (0.609\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-208 15.47mm ID x 3.53mm CS (0.609\" x 0.139\") size, molded in White PTFE. Its outside diameter is 22.53mm (0.887\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-208\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e15.47 mm \/ 0.609 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22.53 mm \/ 0.887 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-208 15.47mm ID x 3.53mm CS (0.609\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-208 15.47mm ID x 3.53mm CS (0.609\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853483913421,"sku":"OR.208.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853483946189,"sku":"OR.208.2.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853483978957,"sku":"OR.208.3.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_99b59242-2d8f-493c-ae2c-66c9a3afbc1e.jpg?v=1794348394"},{"product_id":"as568-209-white-ptfe-o-ring-11-16in-id-x-1-8in-cs","title":"AS568-209 White PTFE O-Ring, 11\/16\" ID x 1\/8\" CS (0.671\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-209 17.04mm ID x 3.53mm CS (0.671\" x 0.139\") size, molded in White PTFE. Its outside diameter is 24.1mm (0.949\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e17.04 mm \/ 0.671 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e24.1 mm \/ 0.949 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-209 17.04mm ID x 3.53mm CS (0.671\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-209 17.04mm ID x 3.53mm CS (0.671\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853484568781,"sku":"OR.209.1.BI.STD.PTFE","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853484601549,"sku":"OR.209.2.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853484634317,"sku":"OR.209.3.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_1b2a03a0-dcf2-40c0-8ca7-b679f4054fd2.jpg?v=1794348405"},{"product_id":"as568-210-white-ptfe-o-ring-3-4in-id-x-1-8in-cs","title":"AS568-210 White PTFE O-Ring, 3\/4\" ID x 1\/8\" CS (0.734\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-210 18.64mm ID x 3.53mm CS (0.734\" x 0.139\") size, molded in White PTFE. Its outside diameter is 25.7mm (1.012\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e18.64 mm \/ 0.734 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25.7 mm \/ 1.012 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-210 18.64mm ID x 3.53mm CS (0.734\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-210 18.64mm ID x 3.53mm CS (0.734\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853485256909,"sku":"OR.210.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853485289677,"sku":"OR.210.2.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853485322445,"sku":"OR.210.3.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_e19e96d4-ea89-4848-be6d-69fb8b1b8021.jpg?v=1794348414"},{"product_id":"as568-211-white-ptfe-o-ring-13-16in-id-x-1-8in-cs","title":"AS568-211 White PTFE O-Ring, 13\/16\" ID x 1\/8\" CS (0.796\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-211 20.22mm ID x 3.53mm CS (0.796\" x 0.139\") size, molded in White PTFE. Its outside diameter is 27.28mm (1.074\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e20.22 mm \/ 0.796 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e27.28 mm \/ 1.074 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-211 20.22mm ID x 3.53mm CS (0.796\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-211 20.22mm ID x 3.53mm CS (0.796\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853485912269,"sku":"OR.211.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853485945037,"sku":"OR.211.2.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853485977805,"sku":"OR.211.3.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_97cd28d9-e321-4dfe-a94a-15b7f2d0c894.jpg?v=1794348426"},{"product_id":"as568-212-white-ptfe-o-ring-7-8in-id-x-1-8in-cs","title":"AS568-212 White PTFE O-Ring, 7\/8\" ID x 1\/8\" CS (0.859\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-212 21.82mm ID x 3.53mm CS (0.859\" x 0.139\") size, molded in White PTFE. Its outside diameter is 28.88mm (1.137\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-212\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e21.82 mm \/ 0.859 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28.88 mm \/ 1.137 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-212 21.82mm ID x 3.53mm CS (0.859\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-212 21.82mm ID x 3.53mm CS (0.859\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853486665933,"sku":"OR.212.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853486698701,"sku":"OR.212.2.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853486731469,"sku":"OR.212.3.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_6cd9396d-8c93-480f-ae50-857af5d50810.jpg?v=1794348434"},{"product_id":"as568-213-white-ptfe-o-ring-15-16in-id-x-1-8in-cs","title":"AS568-213 White PTFE O-Ring, 15\/16\" ID x 1\/8\" CS (0.921\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-213 23.39mm ID x 3.53mm CS (0.921\" x 0.139\") size, molded in White PTFE. Its outside diameter is 30.45mm (1.199\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e23.39 mm \/ 0.921 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30.45 mm \/ 1.199 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-213 23.39mm ID x 3.53mm CS (0.921\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-213 23.39mm ID x 3.53mm CS (0.921\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853487550669,"sku":"OR.213.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853487583437,"sku":"OR.213.2.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853487616205,"sku":"OR.213.3.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_f1a02900-148d-40ef-bf15-4f6dc11aca29.jpg?v=1794348444"},{"product_id":"as568-214-white-ptfe-o-ring-1in-id-x-1-8in-cs","title":"AS568-214 White PTFE O-Ring, 1\" ID x 1\/8\" CS (0.984\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-214 24.99mm ID x 3.53mm CS (0.984\" x 0.139\") size, molded in White PTFE. Its outside diameter is 32.05mm (1.262\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e24.99 mm \/ 0.984 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e32.05 mm \/ 1.262 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-214 24.99mm ID x 3.53mm CS (0.984\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-214 24.99mm ID x 3.53mm CS (0.984\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853488206029,"sku":"OR.214.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853488238797,"sku":"OR.214.2.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853488271565,"sku":"OR.214.3.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_50803953-ef77-486c-82af-a022f6e7e9a9.jpg?v=1794348454"},{"product_id":"as568-215-white-ptfe-o-ring-55a-durometer-1-1-16in-id-x-1-8in-cs","title":"AS568-215 White PTFE O-Ring, 55A Durometer, 1-1\/16\" ID x 1\/8\" CS (1.046\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-215 26.57mm ID x 3.53mm CS (1.046\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 33.63mm (1.324\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-215\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e26.57 mm \/ 1.046 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e33.63 mm \/ 1.324 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-215 26.57mm ID x 3.53mm CS (1.046\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-215 26.57mm ID x 3.53mm CS (1.046\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853488861389,"sku":"OR.215.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853488894157,"sku":"OR.215.2.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853488926925,"sku":"OR.215.3.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_1364962b-097d-4772-9306-8e51087bf6d1.jpg?v=1794348464"},{"product_id":"as568-216-white-ptfe-o-ring-55a-durometer-1-1-8in-id-x-1-8in-cs","title":"AS568-216 White PTFE O-Ring, 55A Durometer, 1-1\/8\" ID x 1\/8\" CS (1.109\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-216 28.17mm ID x 3.53mm CS (1.109\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 35.23mm (1.387\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-216\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28.17 mm \/ 1.109 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e35.23 mm \/ 1.387 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-216 28.17mm ID x 3.53mm CS (1.109\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-216 28.17mm ID x 3.53mm CS (1.109\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853489516749,"sku":"OR.216.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853489549517,"sku":"OR.216.2.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853489582285,"sku":"OR.216.3.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_69bc9d1d-3ae6-447a-badd-c8ef9dbbbfe7.jpg?v=1794348473"},{"product_id":"as568-217-white-ptfe-o-ring-55a-durometer-1-3-16in-id-x-1-8in-cs","title":"AS568-217 White PTFE O-Ring, 55A Durometer, 1-3\/16\" ID x 1\/8\" CS (1.171\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-217 29.74mm ID x 3.53mm CS (1.171\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 36.8mm (1.449\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-217\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e29.74 mm \/ 1.171 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e36.8 mm \/ 1.449 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-217 29.74mm ID x 3.53mm CS (1.171\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-217 29.74mm ID x 3.53mm CS (1.171\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853490073805,"sku":"OR.217.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853490106573,"sku":"OR.217.2.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853490139341,"sku":"OR.217.3.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_64f30183-06f9-4e77-849f-04fe7776fe53.jpg?v=1794348482"},{"product_id":"as568-218-white-ptfe-o-ring-55a-durometer-1-1-4in-id-x-1-8in-cs","title":"AS568-218 White PTFE O-Ring, 55A Durometer, 1-1\/4\" ID x 1\/8\" CS (1.234\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-218 31.34mm ID x 3.53mm CS (1.234\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 38.4mm (1.512\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-218\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e31.34 mm \/ 1.234 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e38.4 mm \/ 1.512 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-218 31.34mm ID x 3.53mm CS (1.234\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-218 31.34mm ID x 3.53mm CS (1.234\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853490827469,"sku":"OR.218.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853490860237,"sku":"OR.218.2.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853490893005,"sku":"OR.218.3.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_3478520f-94f9-4f69-9ba9-b4ee2fc58964.jpg?v=1794348492"},{"product_id":"as568-219-white-ptfe-o-ring-55a-durometer-1-5-16in-id-x-1-8in-cs","title":"AS568-219 White PTFE O-Ring, 55A Durometer, 1-5\/16\" ID x 1\/8\" CS (1.296\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-219 32.92mm ID x 3.53mm CS (1.296\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 39.98mm (1.574\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-219\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e32.92 mm \/ 1.296 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e39.98 mm \/ 1.574 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-219 32.92mm ID x 3.53mm CS (1.296\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-219 32.92mm ID x 3.53mm CS (1.296\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853491351757,"sku":"OR.219.1.BI.STD.PTFE","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853491384525,"sku":"OR.219.2.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853491417293,"sku":"OR.219.3.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_da8fb847-6a87-4bb0-a458-760be49e22d2.jpg?v=1794348501"},{"product_id":"as568-220-white-ptfe-o-ring-55a-durometer-1-3-8in-id-x-1-8in-cs","title":"AS568-220 White PTFE O-Ring, 55A Durometer, 1-3\/8\" ID x 1\/8\" CS (1.359\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-220 34.52mm ID x 3.53mm CS (1.359\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 41.58mm (1.637\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e34.52 mm \/ 1.359 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e41.58 mm \/ 1.637 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-220 34.52mm ID x 3.53mm CS (1.359\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-220 34.52mm ID x 3.53mm CS (1.359\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853492072653,"sku":"OR.220.1.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853492105421,"sku":"OR.220.2.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853492138189,"sku":"OR.220.3.BI.STD.PTFE","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_5f5a4f6b-5b95-4e43-bc00-df4e5a726586.jpg?v=1794348511"},{"product_id":"as568-221-white-ptfe-o-ring-55a-durometer-1-7-16in-id-x-1-8in-cs","title":"AS568-221 White PTFE O-Ring, 55A Durometer, 1-7\/16\" ID x 1\/8\" CS (1.421\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-221 36.09mm ID x 3.53mm CS (1.421\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 43.15mm (1.699\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-221\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e36.09 mm \/ 1.421 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e43.15 mm \/ 1.699 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-221 36.09mm ID x 3.53mm CS (1.421\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-221 36.09mm ID x 3.53mm CS (1.421\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853492728013,"sku":"OR.221.1.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853492760781,"sku":"OR.221.2.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853492793549,"sku":"OR.221.3.BI.STD.PTFE","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_82dff318-5e2d-43d7-8ab7-859c5879c901.jpg?v=1794348520"},{"product_id":"as568-222-white-ptfe-o-ring-55a-durometer-1-1-2in-id-x-1-8in-cs","title":"AS568-222 White PTFE O-Ring, 55A Durometer, 1-1\/2\" ID x 1\/8\" CS (1.484\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-222 37.69mm ID x 3.53mm CS (1.484\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 44.75mm (1.762\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-222\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e37.69 mm \/ 1.484 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e44.75 mm \/ 1.762 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-222 37.69mm ID x 3.53mm CS (1.484\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-222 37.69mm ID x 3.53mm CS (1.484\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853493383373,"sku":"OR.222.1.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853493416141,"sku":"OR.222.2.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853493448909,"sku":"OR.222.3.BI.STD.PTFE","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_fecc7e42-36fe-41d8-908f-3f49f9e77494.jpg?v=1794348530"},{"product_id":"as568-223-white-ptfe-o-ring-55a-durometer-1-5-8in-id-x-1-8in-cs","title":"AS568-223 White PTFE O-Ring, 55A Durometer, 1-5\/8\" ID x 1\/8\" CS (1.609\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-223 40.87mm ID x 3.53mm CS (1.609\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 47.93mm (1.887\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-223\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40.87 mm \/ 1.609 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e47.93 mm \/ 1.887 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-223 40.87mm ID x 3.53mm CS (1.609\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-223 40.87mm ID x 3.53mm CS (1.609\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853494038733,"sku":"OR.223.1.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853494071501,"sku":"OR.223.2.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853494104269,"sku":"OR.223.3.BI.STD.PTFE","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_b6594a59-9861-4b17-a1c8-329c13a9b196.jpg?v=1794348539"},{"product_id":"as568-224-white-ptfe-o-ring-55a-durometer-1-3-4in-id-x-1-8in-cs","title":"AS568-224 White PTFE O-Ring, 55A Durometer, 1-3\/4\" ID x 1\/8\" CS (1.734\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-224 44.04mm ID x 3.53mm CS (1.734\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 51.1mm (2.012\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-224\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e44.04 mm \/ 1.734 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e51.1 mm \/ 2.012 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-224 44.04mm ID x 3.53mm CS (1.734\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-224 44.04mm ID x 3.53mm CS (1.734\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853494694093,"sku":"OR.224.1.BI.STD.PTFE","price":27.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853494726861,"sku":"OR.224.2.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853494759629,"sku":"OR.224.3.BI.STD.PTFE","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_ff2daeca-05b1-4583-837c-cd4d5e23860e.jpg?v=1794348548"},{"product_id":"as568-226-white-ptfe-o-ring-55a-durometer-2in-id-x-1-8in-cs","title":"AS568-226 White PTFE O-Ring, 55A Durometer, 2\" ID x 1\/8\" CS (1.984\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-226 50.39mm ID x 3.53mm CS (1.984\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 57.45mm (2.262\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-226\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50.39 mm \/ 1.984 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e57.45 mm \/ 2.262 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-226 50.39mm ID x 3.53mm CS (1.984\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-226 50.39mm ID x 3.53mm CS (1.984\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853495808205,"sku":"OR.226.1.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853495840973,"sku":"OR.226.2.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853495873741,"sku":"OR.226.3.BI.STD.PTFE","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_3d421472-cb9c-473c-8e3b-1c808e6995fe.jpg?v=1794348565"},{"product_id":"as568-227-white-ptfe-o-ring-55a-durometer-2-1-8in-id-x-1-8in-cs","title":"AS568-227 White PTFE O-Ring, 55A Durometer, 2-1\/8\" ID x 1\/8\" CS (2.109\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-227 53.57mm ID x 3.53mm CS (2.109\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 60.63mm (2.387\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-227\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e53.57 mm \/ 2.109 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e60.63 mm \/ 2.387 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-227 53.57mm ID x 3.53mm CS (2.109\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-227 53.57mm ID x 3.53mm CS (2.109\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853496463565,"sku":"OR.227.1.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853496496333,"sku":"OR.227.2.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853496529101,"sku":"OR.227.3.BI.STD.PTFE","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_20f93fb2-67ae-4a8f-8999-9a37438a11b9.jpg?v=1794348573"},{"product_id":"as568-229-white-ptfe-o-ring-55a-durometer-2-3-8in-id-x-1-8in-cs","title":"AS568-229 White PTFE O-Ring, 55A Durometer, 2-3\/8\" ID x 1\/8\" CS (2.359\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-229 59.92mm ID x 3.53mm CS (2.359\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 66.98mm (2.637\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-229\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e59.92 mm \/ 2.359 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e66.98 mm \/ 2.637 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-229 59.92mm ID x 3.53mm CS (2.359\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-229 59.92mm ID x 3.53mm CS (2.359\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853497675981,"sku":"OR.229.1.BI.STD.PTFE","price":28.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853497708749,"sku":"OR.229.2.BI.STD.PTFE","price":31.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853497741517,"sku":"OR.229.3.BI.STD.PTFE","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_93a23816-7671-4824-8253-9421ead22bc4.jpg?v=1794348591"},{"product_id":"as568-234-white-ptfe-o-ring-55a-durometer-3in-id-x-1-8in-cs","title":"AS568-234 White PTFE O-Ring, 55A Durometer, 3\" ID x 1\/8\" CS (2.984\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-234 75.79mm ID x 3.53mm CS (2.984\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 82.85mm (3.262\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-234\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75.79 mm \/ 2.984 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e82.85 mm \/ 3.262 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-234 75.79mm ID x 3.53mm CS (2.984\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-234 75.79mm ID x 3.53mm CS (2.984\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853500330189,"sku":"OR.234.1.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853500362957,"sku":"OR.234.2.BI.STD.PTFE","price":33.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853500395725,"sku":"OR.234.3.BI.STD.PTFE","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_96acea42-3235-4b00-af84-bcb1cc16dd00.jpg?v=1794348630"},{"product_id":"as568-235-white-ptfe-o-ring-55a-durometer-3-1-8in-id-x-1-8in-cs","title":"AS568-235 White PTFE O-Ring, 55A Durometer, 3-1\/8\" ID x 1\/8\" CS (3.109\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-235 78.97mm ID x 3.53mm CS (3.109\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 86.03mm (3.387\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e78.97 mm \/ 3.109 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e86.03 mm \/ 3.387 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-235 78.97mm ID x 3.53mm CS (3.109\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-235 78.97mm ID x 3.53mm CS (3.109\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853501018317,"sku":"OR.235.1.BI.STD.PTFE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853501051085,"sku":"OR.235.2.BI.STD.PTFE","price":35.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853501083853,"sku":"OR.235.3.BI.STD.PTFE","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_8db92d0d-521f-441f-be80-9f67b7cf8afc.jpg?v=1794348642"},{"product_id":"as568-236-white-ptfe-o-ring-55a-durometer-3-1-4in-id-x-1-8in-cs","title":"AS568-236 White PTFE O-Ring, 55A Durometer, 3-1\/4\" ID x 1\/8\" CS (3.234\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-236 82.14mm ID x 3.53mm CS (3.234\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 89.2mm (3.512\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-236\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e82.14 mm \/ 3.234 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e89.2 mm \/ 3.512 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-236 82.14mm ID x 3.53mm CS (3.234\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-236 82.14mm ID x 3.53mm CS (3.234\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853501673677,"sku":"OR.236.1.BI.STD.PTFE","price":33.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853501706445,"sku":"OR.236.2.BI.STD.PTFE","price":43.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853501739213,"sku":"OR.236.3.BI.STD.PTFE","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_0238170a-6c67-45c4-a4be-3a8f87e049b3.jpg?v=1794348649"},{"product_id":"as568-238-white-ptfe-o-ring-55a-durometer-3-1-2in-id-x-1-8in-cs","title":"AS568-238 White PTFE O-Ring, 55A Durometer, 3-1\/2\" ID x 1\/8\" CS (3.484\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-238 88.49mm ID x 3.53mm CS (3.484\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 95.55mm (3.762\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e88.49 mm \/ 3.484 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95.55 mm \/ 3.762 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-238 88.49mm ID x 3.53mm CS (3.484\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-238 88.49mm ID x 3.53mm CS (3.484\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853502755021,"sku":"OR.238.1.BI.STD.PTFE","price":30.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853502787789,"sku":"OR.238.2.BI.STD.PTFE","price":36.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853502820557,"sku":"OR.238.3.BI.STD.PTFE","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_08c2e86f-b2b2-4eb0-bd54-61248ae2b4f7.jpg?v=1794348666"},{"product_id":"as568-239-white-ptfe-o-ring-55a-durometer-3-5-8in-id-x-1-8in-cs","title":"AS568-239 White PTFE O-Ring, 55A Durometer, 3-5\/8\" ID x 1\/8\" CS (3.609\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-239 91.67mm ID x 3.53mm CS (3.609\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 98.73mm (3.887\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-239\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e91.67 mm \/ 3.609 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e98.73 mm \/ 3.887 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-239 91.67mm ID x 3.53mm CS (3.609\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-239 91.67mm ID x 3.53mm CS (3.609\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853503279309,"sku":"OR.239.1.BI.STD.PTFE","price":32.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853503312077,"sku":"OR.239.2.BI.STD.PTFE","price":40.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853503344845,"sku":"OR.239.3.BI.STD.PTFE","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_5ad7ee3a-7c01-4eca-813b-f9b2efb6b129.jpg?v=1794348673"},{"product_id":"as568-242-white-ptfe-o-ring-55a-durometer-4in-id-x-1-8in-cs","title":"AS568-242 White PTFE O-Ring, 55A Durometer, 4\" ID x 1\/8\" CS (3.984\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-242 101.19mm ID x 3.53mm CS (3.984\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 108.25mm (4.262\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-242\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e101.19 mm \/ 3.984 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e108.25 mm \/ 4.262 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-242 101.19mm ID x 3.53mm CS (3.984\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-242 101.19mm ID x 3.53mm CS (3.984\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853504819405,"sku":"OR.242.1.BI.STD.PTFE","price":39.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853504852173,"sku":"OR.242.2.BI.STD.PTFE","price":53.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853504884941,"sku":"OR.242.3.BI.STD.PTFE","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_0bbcbb90-902a-44c9-8ff5-3bb0bb036f75.jpg?v=1794348698"},{"product_id":"as568-243-white-ptfe-o-ring-55a-durometer-4-1-8in-id-x-1-8in-cs","title":"AS568-243 White PTFE O-Ring, 55A Durometer, 4-1\/8\" ID x 1\/8\" CS (4.109\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-243 104.37mm ID x 3.53mm CS (4.109\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 111.43mm (4.387\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-243\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e104.37 mm \/ 4.109 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e111.43 mm \/ 4.387 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-243 104.37mm ID x 3.53mm CS (4.109\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-243 104.37mm ID x 3.53mm CS (4.109\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853505343693,"sku":"OR.243.1.BI.STD.PTFE","price":36.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853505376461,"sku":"OR.243.2.BI.STD.PTFE","price":48.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853505409229,"sku":"OR.243.3.BI.STD.PTFE","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_24396819-1a6a-4ca9-8f06-c66ad88cbc1c.jpg?v=1794348705"},{"product_id":"as568-245-white-ptfe-o-ring-55a-durometer-4-3-8in-id-x-1-8in-cs","title":"AS568-245 White PTFE O-Ring, 55A Durometer, 4-3\/8\" ID x 1\/8\" CS (4.359\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-245 110.72mm ID x 3.53mm CS (4.359\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 117.78mm (4.637\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-245\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e110.72 mm \/ 4.359 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e117.78 mm \/ 4.637 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-245 110.72mm ID x 3.53mm CS (4.359\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-245 110.72mm ID x 3.53mm CS (4.359\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853506359501,"sku":"OR.245.1.BI.STD.PTFE","price":35.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853506392269,"sku":"OR.245.2.BI.STD.PTFE","price":46.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853506425037,"sku":"OR.245.3.BI.STD.PTFE","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_5a0650b5-07cc-4846-aad4-b9f4fe374139.jpg?v=1794348718"},{"product_id":"as568-251-white-ptfe-o-ring-55a-durometer-5-1-8in-id-x-1-8in-cs","title":"AS568-251 White PTFE O-Ring, 55A Durometer, 5-1\/8\" ID x 1\/8\" CS (5.109\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-251 129.77mm ID x 3.53mm CS (5.109\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 136.83mm (5.387\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e129.77 mm \/ 5.109 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e136.83 mm \/ 5.387 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-251 129.77mm ID x 3.53mm CS (5.109\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-251 129.77mm ID x 3.53mm CS (5.109\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853509341389,"sku":"OR.251.1.BI.STD.PTFE","price":48.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853509374157,"sku":"OR.251.2.BI.STD.PTFE","price":72.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853509406925,"sku":"OR.251.3.BI.STD.PTFE","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_c5b63047-6f9c-41fc-945f-4c2d1db0c049.jpg?v=1794348762"},{"product_id":"as568-257-white-ptfe-o-ring-55a-durometer-5-7-8in-id-x-1-8in-cs","title":"AS568-257 White PTFE O-Ring, 55A Durometer, 5-7\/8\" ID x 1\/8\" CS (5.859\" x 0.139\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-257 148.82mm ID x 3.53mm CS (5.859\" x 0.139\") size, molded in 55A White PTFE. Its outside diameter is 155.88mm (6.137\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-257\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e148.82 mm \/ 5.859 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.53 mm \/ 0.139 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e155.88 mm \/ 6.137 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-325°F to +500°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical pumps and valves, solvent and fuel handling, cryogenic service and static seals that must not swell. If your manual, parts list or old ring calls for AS568-257 148.82mm ID x 3.53mm CS (5.859\" x 0.139\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy PTFE\u003c\/h3\u003e\u003cp\u003ePTFE is chemically inert and will not swell, harden or degrade in fluids that attack rubber. Recommended for virtually all chemicals and solvents, cryogenic to high temperatures. Not recommended for applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better. PTFE does not stretch like rubber: warm it in hot water for a few minutes to soften it, ease it over the shoulder slowly, and let it cool in the groove.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-257 148.82mm ID x 3.53mm CS (5.859\" x 0.139\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is PTFE good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to virtually all chemicals and solvents, cryogenic to high temperatures. Avoid applications that need elastic stretch or squeeze recovery; PTFE is rigid and does not rebound like rubber.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853512028365,"sku":"OR.257.1.BI.STD.PTFE","price":41.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853512061133,"sku":"OR.257.2.BI.STD.PTFE","price":59.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853512093901,"sku":"OR.257.3.BI.STD.PTFE","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-026_6bf4c4e4-5552-4134-836a-98585cf7445a.jpg?v=1794348804"}],"url":"https:\/\/beaverislandparts.com\/collections\/as568-2xx-white-ptfe-o-rings.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}