{"title":"AS568 400 Series FFKM Perfluoroelastomer O-Rings","description":"\u003cp\u003eAS568 400 series (dash numbers -4xx) o-rings in FFKM Perfluoroelastomer. Each listing gives the dash number, actual ID and cross-section in inches and millimetres, durometer and temperature range.\u003c\/p\u003e","products":[{"product_id":"as568-417-ffkm-perfluoroelastomer-o-ring-75a-durometer-3-1-2in-id-x-1-4in-cs","title":"AS568-417 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 3-1\/2\" ID x 1\/4\" CS (3.475\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-417 88.27mm ID x 6.99mm CS (3.475\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 102.25mm (4.026\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-417\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e88.27 mm \/ 3.475 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e102.25 mm \/ 4.026 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-417 88.27mm ID x 6.99mm CS (3.475\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-417 88.27mm ID x 6.99mm CS (3.475\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853560459469,"sku":"OR.417.BI.STD.FF75","price":648.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_f5e37225-3e70-4ec2-a570-52cfe0952474.jpg?v=1794349527"},{"product_id":"as568-425-ffkm-perfluoroelastomer-o-ring-75a-durometer-4-1-2in-id-x-1-4in-cs","title":"AS568-425 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 4-1\/2\" ID x 1\/4\" CS (4.475\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-425 113.66mm ID x 6.99mm CS (4.475\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 127.64mm (5.025\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-425\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e113.66 mm \/ 4.475 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e127.64 mm \/ 5.025 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N894)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-425 113.66mm ID x 6.99mm CS (4.475\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-425 113.66mm ID x 6.99mm CS (4.475\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853562622157,"sku":"OR.425.BI.STD.FF75","price":1257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_540c2e28-4485-44ff-9d52-a99c3fb6607d.jpg?v=1794349554"},{"product_id":"as568-432-ffkm-perfluoroelastomer-o-ring-75a-durometer-5-3-8in-id-x-1-4in-cs","title":"AS568-432 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 5-3\/8\" ID x 1\/4\" CS (5.350\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-432 135.89mm ID x 6.99mm CS (5.350\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 149.87mm (5.900\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-432\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e135.89 mm \/ 5.350 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e149.87 mm \/ 5.900 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-432 135.89mm ID x 6.99mm CS (5.350\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-432 135.89mm ID x 6.99mm CS (5.350\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853565079757,"sku":"OR.432.BI.STD.FF75","price":783.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_1ee6e8dc-8fb9-4672-b2cc-195bc0e07416.jpg?v=1794349591"},{"product_id":"as568-434-ffkm-perfluoroelastomer-o-ring-75a-durometer-5-5-8in-id-x-1-4in-cs","title":"AS568-434 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 5-5\/8\" ID x 1\/4\" CS (5.600\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-434 142.24mm ID x 6.99mm CS (5.600\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 156.22mm (6.150\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e142.24 mm \/ 5.600 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e156.22 mm \/ 6.150 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-434 142.24mm ID x 6.99mm CS (5.600\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-434 142.24mm ID x 6.99mm CS (5.600\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853565866189,"sku":"OR.434.BI.STD.FF75","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_d3a30fb8-45e8-4722-91a8-cd167c020a96.jpg?v=1794349603"},{"product_id":"as568-436-ffkm-perfluoroelastomer-o-ring-75a-durometer-5-7-8in-id-x-1-4in-cs","title":"AS568-436 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 5-7\/8\" ID x 1\/4\" CS (5.850\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-436 148.59mm ID x 6.99mm CS (5.850\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 162.57mm (6.400\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-436\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e148.59 mm \/ 5.850 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e162.57 mm \/ 6.400 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-436 148.59mm ID x 6.99mm CS (5.850\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-436 148.59mm ID x 6.99mm CS (5.850\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853566685389,"sku":"OR.436.BI.STD.FF75","price":832.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_cf794a80-919a-4cbb-b693-67207297f335.jpg?v=1794349615"},{"product_id":"as568-438-ffkm-perfluoroelastomer-o-ring-75a-durometer-6-1-4in-id-x-1-4in-cs","title":"AS568-438 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 6-1\/4\" ID x 1\/4\" CS (6.225\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-438 158.11mm ID x 6.99mm CS (6.225\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 172.09mm (6.775\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e158.11 mm \/ 6.225 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e172.09 mm \/ 6.775 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-438 158.11mm ID x 6.99mm CS (6.225\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-438 158.11mm ID x 6.99mm CS (6.225\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853567504589,"sku":"OR.438.BI.STD.FF75","price":910.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_0687e5b0-938d-4729-b177-1b4193470c46.jpg?v=1794349628"},{"product_id":"as568-439-ffkm-perfluoroelastomer-o-ring-75a-durometer-6-1-2in-id-x-1-4in-cs","title":"AS568-439 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 6-1\/2\" ID x 1\/4\" CS (6.475\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-439 164.46mm ID x 6.99mm CS (6.475\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 178.44mm (7.025\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-439\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e164.46 mm \/ 6.475 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e178.44 mm \/ 7.025 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-439 164.46mm ID x 6.99mm CS (6.475\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-439 164.46mm ID x 6.99mm CS (6.475\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853567897805,"sku":"OR.439.BI.STD.FF75","price":938.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_4bfac5aa-ff1f-4b74-8abb-049efa7e0e86.jpg?v=1794349633"},{"product_id":"as568-440-ffkm-perfluoroelastomer-o-ring-75a-durometer-6-3-4in-id-x-1-4in-cs","title":"AS568-440 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 6-3\/4\" ID x 1\/4\" CS (6.725\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-440 170.81mm ID x 6.99mm CS (6.725\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 184.79mm (7.275\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e170.81 mm \/ 6.725 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e184.79 mm \/ 7.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-440 170.81mm ID x 6.99mm CS (6.725\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-440 170.81mm ID x 6.99mm CS (6.725\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853568291021,"sku":"OR.440.BI.STD.FF75","price":952.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_ada23c03-6c01-4047-839f-7d1d05f9576e.jpg?v=1794349639"},{"product_id":"as568-445-ffkm-perfluoroelastomer-o-ring-75a-durometer-8in-id-x-1-4in-cs","title":"AS568-445 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 8\" ID x 1\/4\" CS (7.975\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-445 202.56mm ID x 6.99mm CS (7.975\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 216.54mm (8.525\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-445\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e202.56 mm \/ 7.975 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e216.54 mm \/ 8.525 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-445 202.56mm ID x 6.99mm CS (7.975\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-445 202.56mm ID x 6.99mm CS (7.975\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853570060493,"sku":"OR.445.BI.STD.FF75","price":1065.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_e54bd916-bf23-4e54-be06-d63fef1dbb4c.jpg?v=1794349664"},{"product_id":"as568-450-ffkm-perfluoroelastomer-o-ring-75a-durometer-10-1-2in-id-x-1-4in-cs","title":"AS568-450 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 10-1\/2\" ID x 1\/4\" CS (10.475\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-450 266.06mm ID x 6.99mm CS (10.475\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 280.04mm (11.025\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-450\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e266.06 mm \/ 10.475 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e280.04 mm \/ 11.025 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-450 266.06mm ID x 6.99mm CS (10.475\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-450 266.06mm ID x 6.99mm CS (10.475\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853571797197,"sku":"OR.450.BI.STD.FF75","price":1257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_f5a91c93-e5a2-47f6-96ca-1a9c642cc20b.jpg?v=1794349689"},{"product_id":"as568-470-ffkm-perfluoroelastomer-o-ring-75a-durometer-21in-id-x-1-4in-cs","title":"AS568-470 FFKM Perfluoroelastomer O-Ring, 75A Durometer, 21\" ID x 1\/4\" CS (20.955\" x 0.275\" Actual) - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard AS568-470 532.26mm ID x 6.99mm CS (20.955\" x 0.275\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 546.24mm (21.506\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAS568-470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e532.26 mm \/ 20.955 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.99 mm \/ 0.275 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e546.24 mm \/ 21.506 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N896)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eper rating shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for AS568-470 532.26mm ID x 6.99mm CS (20.955\" x 0.275\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a AS568-470 532.26mm ID x 6.99mm CS (20.955\" x 0.275\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48853576188109,"sku":"OR.470.BI.STD.FF75","price":2565.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_4cdb3fe1-1584-4f3f-8a6f-a2095f83a73e.jpg?v=1794349752"}],"url":"https:\/\/beaverislandparts.com\/collections\/as568-4xx-ffkm-perfluoroelastomer-o-rings.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}