{"title":"JCB Hydraulic Seal Kits","description":"\u003cp\u003eAftermarket hydraulic cylinder seal kits for JCB equipment, listed by OEM kit number. Each listing gives the machine models, rod and bore sizes and the kit contents.\u003c\/p\u003e","products":[{"product_id":"231-02906-arm-boom-swing-cylinder-seal-kit-fits-jcb-801-30mm-rod-x-50mm-bore","title":"231-02906 Arm Boom Swing Cylinder Seal Kit Fits JCB 801, 30mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 231-02906, for the arm boom swing cylinder on JCB 801. It is sized for a 30mm rod x 50mm bore cylinder. Kit contents: Wiper, 3 pc U cup, 3pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e231-02906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Boom Swing Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 3 pc U cup, 3pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 231-02906 on JCB 801. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 231-02906.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060250829,"sku":"SK.231-02906-JCB.BI.OEM","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_bc02442d-ea2f-40e6-b04b-9b47173794bf.jpg?v=1794371633"},{"product_id":"231-35413-bucket-cylinder-seal-kit-fits-jcb-8015-30mm-rod-x-50mm-bore","title":"231-35413 Bucket Cylinder Seal Kit Fits JCB 8015, 30mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 231-35413, for the bucket cylinder on JCB 8015. It is sized for a 30mm rod x 50mm bore cylinder. Kit contents: Wiper, U seal and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e231-35413\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 8015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM894878-M895999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 231-35413 on JCB 8015, serial range M894878-M895999. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 231-35413.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060283597,"sku":"SK.231-35413-JCB.BI.OEM","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_6f6ff2b0-806c-4340-ad7e-6f130a7ad31d.jpg?v=1794371633"},{"product_id":"231-77408-boom-cylinder-seal-kit-fits-jcb-8014-8015-17-30mm-rod-x-55mm-bore","title":"231-77408 Boom Cylinder Seal Kit Fits JCB 8014 8015-17, 30mm rod x 55mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 231-77408, for the boom cylinder on JCB 8014 8015-17. It is sized for a 30mm rod x 55mm bore cylinder. Kit contents: Wiper, U cup and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e231-77408\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 8014 8015-17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 55mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM791223-M795999 8015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 231-77408 on JCB 8014 8015-17, serial range M791223-M795999 8015. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 231-77408.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060316365,"sku":"SK.231-77408-JCB.BI.OEM","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_92f0ea41-d974-4422-93d6-13ae8f160124.jpg?v=1794371633"},{"product_id":"232-02906-arm-cylinder-seal-kit-fits-jcb-803-40mm-rod-x-70mm-bore","title":"232-02906 Arm Cylinder Seal Kit Fits JCB 803, 40mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-02906, for the arm cylinder on JCB 803. It is sized for a 40mm rod x 70mm bore cylinder. Kit contents: U cup, 4pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-02906\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM665001-M665736, M666001-666935\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eU cup, 4pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-02906 on JCB 803, serial range M665001-M665736, M666001-666935. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-02906.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060349133,"sku":"SK.232-02906-JCB.BI.OEM","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_7d0a385a-8606-452f-a8c5-8edc31f0f49c.jpg?v=1794371635"},{"product_id":"232-08512-swing-cylinder-seal-kit-fits-jcb-803-804-40mm-rod-x-80mm-bore","title":"232-08512 Swing Cylinder Seal Kit Fits JCB 803 804, 40mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-08512, for the swing cylinder on JCB 803 804. It is sized for a 40mm rod x 80mm bore cylinder. Kit contents: U cup, 4pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-08512\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSwing Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM666001-M666333 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eU cup, 4pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-08512 on JCB 803 804, serial range M666001-M666333 804. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-08512.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060381901,"sku":"SK.232-08512-JCB.BI.OEM","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_b2d8dc3f-1d53-4506-b139-03b78347e02c.jpg?v=1794371638"},{"product_id":"232-22510-blade-cylinder-seal-kit-fits-jcb-803-804-45mm-rod-x-90mm-bore","title":"232-22510 Blade Cylinder Seal Kit Fits JCB 803 804, 45mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-22510, for the blade cylinder on JCB 803 804. It is sized for a 45mm rod x 90mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 3pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-22510\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlade Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e45mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM665001-M665736, M666001-666930 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 3pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-22510 on JCB 803 804, serial range M665001-M665736, M666001-666930 804. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-22510.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060414669,"sku":"SK.232-22510-JCB.BI.OEM","price":130.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_c804cab4-31da-437c-b5d9-790b01a9d4e1.jpg?v=1794371639"},{"product_id":"232-51155-boom-cylinder-seal-kit-fits-jcb-804-40mm-rod-x-90mm-bore","title":"232-51155 Boom Cylinder Seal Kit Fits JCB 804, 40mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-51155, for the boom cylinder on JCB 804. It is sized for a 40mm rod x 90mm bore cylinder. Kit contents: U cup, Buffer, 4pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-51155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM734001-M734401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eU cup, Buffer, 4pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-51155 on JCB 804, serial range M734001-M734401. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-51155.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060447437,"sku":"SK.232-51155-JCB.BI.OEM","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_4a89f29b-86db-4221-8246-a893400c7b23.jpg?v=1794371639"},{"product_id":"232-51254-arm-bucket-cylinder-seal-kit-fits-jcb-804-45mm-rod-x-75mm-bore","title":"232-51254 Arm Bucket Cylinder Seal Kit Fits JCB 804, 45mm rod x 75mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-51254, for the arm bucket cylinder on JCB 804. It is sized for a 45mm rod x 75mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-51254\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Bucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e45mm rod x 75mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM734001-M734401 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-51254 on JCB 804, serial range M734001-M734401 803. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-51254.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060480205,"sku":"SK.232-51254-JCB.BI.OEM","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_305e60c0-9c04-4098-8420-99e4ab856228.jpg?v=1794371641"},{"product_id":"232-56152-boom-cylinder-seal-kit-fits-jcb-803-m-p-40mm-rod-x-80mm-bore","title":"232-56152 Boom Cylinder Seal Kit Fits JCB 803 M P, 40mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-56152, for the boom cylinder on JCB 803 M P. It is sized for a 40mm rod x 80mm bore cylinder. Kit contents: Wiper, U cup, Buffer, orings and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-56152\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 M P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM666957-M667435 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, orings and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-56152 on JCB 803 M P, serial range M666957-M667435 803. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-56152.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060512973,"sku":"SK.232-56152-JCB.BI.OEM","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_5552e55f-4b77-4528-a6eb-a1adedb4988a.jpg?v=1794371644"},{"product_id":"232-56352-arm-cylinder-seal-kit-fits-jcb-803-m-p-s-804-40mm-rod-x-70mm-bore","title":"232-56352 Arm Cylinder Seal Kit Fits JCB 803 M P S 804, 40mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-56352, for the arm cylinder on JCB 803 M P S 804. It is sized for a 40mm rod x 70mm bore cylinder. Kit contents: Wiper, U cup, Buffer, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-56352\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 M P S 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM666936-M667435 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-56352 on JCB 803 M P S 804, serial range M666936-M667435 803. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-56352.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060545741,"sku":"SK.232-56352-JCB.BI.OEM","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_24cf0563-74e0-4414-9ffe-0a0835f9f870.jpg?v=1794371644"},{"product_id":"232-56507-bucket-cylinder-seal-kit-fits-jcb-803-m-p-50mm-rod-x-75mm-bore","title":"232-56507 Bucket Cylinder Seal Kit Fits JCB 803 M P, 50mm rod x 75mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-56507, for the bucket cylinder on JCB 803 M P. It is sized for a 50mm rod x 75mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-56507\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 M P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 75mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM666957-M667435 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-56507 on JCB 803 M P, serial range M666957-M667435 803. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-56507.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060578509,"sku":"SK.232-56507-JCB.BI.OEM","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_0aad969f-4a39-45b8-b266-ea2e1d43ffb4.jpg?v=1794371644"},{"product_id":"232-56754-blade-cylinder-seal-kit-fits-jcb-803-804-45mm-rod-x-90mm-bore","title":"232-56754 Blade Cylinder Seal Kit Fits JCB 803 804, 45mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-56754, for the blade cylinder on JCB 803 804. It is sized for a 45mm rod x 90mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-56754\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlade Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e45mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM666931-M667435 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-56754 on JCB 803 804, serial range M666931-M667435 803. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-56754.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060611277,"sku":"SK.232-56754-JCB.BI.OEM","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_b1e62a0a-a367-45a9-b214-de1756dc9993.jpg?v=1794371646"},{"product_id":"232-56956-swing-cylinder-seal-kit-fits-jcb-803-804-50mm-rod-x-80mm-bore","title":"232-56956 Swing Cylinder Seal Kit Fits JCB 803 804, 50mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-56956, for the swing cylinder on JCB 803 804. It is sized for a 50mm rod x 80mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc wear band and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-56956\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSwing Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM666334-M667435 803\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc wear band and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-56956 on JCB 803 804, serial range M666334-M667435 803. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-56956.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060644045,"sku":"SK.232-56956-JCB.BI.OEM","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_ccf3b503-fd3f-4d4d-9813-5dbeee887be7.jpg?v=1794371649"},{"product_id":"232-95956-arm-cylinder-seal-kit-fits-jcb-803-mag-plus-40mm-rod-x-70mm-bore","title":"232-95956 Arm Cylinder Seal Kit Fits JCB 803 Mag Plus, 40mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 232-95956, for the arm cylinder on JCB 803 Mag Plus. It is sized for a 40mm rod x 70mm bore cylinder. Kit contents: Wiper, U cup, Buffer, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e232-95956\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 803 Mag Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 232-95956 on JCB 803 Mag Plus. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 232-95956.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855060709581,"sku":"SK.232-95956-JCB.BI.OEM","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_f67a86aa-c1f2-4e3e-80e2-fef193f6ff4f.jpg?v=1794371650"},{"product_id":"262-83024-hydraulic-cylinder-seal-kit-fits-jcb-426-426b-30mm-rod-x-60mm-bore","title":"262-83024 Hydraulic Cylinder Seal Kit Fits JCB 426 426B, 30mm rod x 60mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 262-83024 on JCB 426 426B. It is sized for a 30mm rod x 60mm bore cylinder. Kit contents: Wiper, U cup, oring and 5 pc Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e262-83024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 426 426B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 60mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, oring and 5 pc Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 262-83024 on JCB 426 426B. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 262-83024.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855067951309,"sku":"SK.262-83024-JCB.BI.OEM","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_540c85b1-b824-46d0-b0d8-7b4eea89e248.jpg?v=1794371939"},{"product_id":"331-39036-boom-cylinder-seal-kit-fits-jcb-js210-85mm-rod-x-125mm-bore","title":"331-39036 Boom Cylinder Seal Kit Fits JCB JS210, 85mm rod x 125mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 331-39036, for the boom cylinder on JCB JS210. It is sized for a 85mm rod x 125mm bore cylinder. Kit contents: Wiper, U cup, Buffer, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e331-39036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 125mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 331-39036 on JCB JS210. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 331-39036.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071621325,"sku":"SK.331-39036-JCB.BI.OEM","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_029466b5-aff2-4a4e-9bf5-6110e9c69295.jpg?v=1794372091"},{"product_id":"331-39041-bucket-cylinder-seal-kit-fits-jcb-js210-85mm-rod-x-115mm-bore","title":"331-39041 Bucket Cylinder Seal Kit Fits JCB JS210, 85mm rod x 115mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 331-39041, for the bucket cylinder on JCB JS210. It is sized for a 85mm rod x 115mm bore cylinder. Kit contents: Wiper, U cup, Buffer, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e331-39041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 115mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 331-39041 on JCB JS210. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 331-39041.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071654093,"sku":"SK.331-39041-JCB.BI.OEM","price":136.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_462a82ee-86ca-4c2a-8569-f22b34cc619a.jpg?v=1794372093"},{"product_id":"331-39047-hydraulic-cylinder-seal-kit-fits-jcb-js210-95mm-rod-x-130mm-bore","title":"331-39047 Hydraulic Cylinder Seal Kit Fits JCB JS210, 95mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 331-39047 on JCB JS210. It is sized for a 95mm rod x 130mm bore cylinder. Kit contents: Wiper, U cup, Buffer, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e331-39047\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 331-39047 on JCB JS210. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 331-39047.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071686861,"sku":"SK.331-39047-JCB.BI.OEM","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_85b444af-e24b-469f-90e4-b3fb9c216390.jpg?v=1794372093"},{"product_id":"332-c7368-bucket-cylinder-seal-kit-fits-jcb-95mm-rod-x-130mm-bore","title":"332-C7368 Bucket Cylinder Seal Kit Fits JCB, 95mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 332-C7368, for the bucket cylinder. It is sized for a 95mm rod x 130mm bore cylinder. Kit contents: Wiper, 2pc U cup, T seal, 2pc oring, 4pc wear band and 6pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e332-C7368\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc U cup, T seal, 2pc oring, 4pc wear band and 6pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 332-C7368. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 332-C7368.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071719629,"sku":"SK.332-C7368-JCB.BI.OEM","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_e37a117e-c206-4178-8c17-b255e63da7f9.jpg?v=1794372096"},{"product_id":"332-d4850-extension-cylinder-seal-kit-fits-jcb-3cx-turbo-40mm-rod-x-70mm-bore","title":"332-D4850 Extension Cylinder Seal Kit Fits JCB 3CX Turbo, 40mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 332-D4850, for the extension cylinder on JCB 3CX Turbo. It is sized for a 40mm rod x 70mm bore cylinder. Kit contents: Wiper, 2pc U cup, oring and all Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e332-D4850\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 3CX Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eExtension Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc U cup, oring and all Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 332-D4850 on JCB 3CX Turbo. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 332-D4850.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071752397,"sku":"SK.332-D4850-JCB.BI.OEM","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_c56457b7-75fd-43d9-b5fc-02c50cbf716f.jpg?v=1794372096"},{"product_id":"332-e8224-bucket-cylinder-seal-kit-fits-jcb-3cx-turbo-60mm-rod-x-90mm-bore","title":"332-E8224 Bucket Cylinder Seal Kit Fits JCB 3CX Turbo, 60mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 332-E8224, for the bucket cylinder on JCB 3CX Turbo. It is sized for a 60mm rod x 90mm bore cylinder. Kit contents: Wiper, U cup, oring and all Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e332-E8224\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 3CX Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e60mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, oring and all Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 332-E8224 on JCB 3CX Turbo. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 332-E8224.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071785165,"sku":"SK.332-E8224-JCB.BI.OEM","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_09cc58fe-4b8d-483f-ac9a-647ebcc616cb.jpg?v=1794372098"},{"product_id":"332-g9281-bucket-cylinder-seal-kit-fits-jcb-js200-js220-85mm-rod-x-115mm-bore","title":"332-G9281 Bucket Cylinder Seal Kit Fits JCB JS200 JS220, 85mm rod x 115mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 332-G9281, for the bucket cylinder on JCB JS200 JS220. It is sized for a 85mm rod x 115mm bore cylinder. Kit contents: Wiper, 2pc U cup, T seal, 2pc oring, 4pc wear band and 6pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e332-G9281\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS200 JS220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 115mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc U cup, T seal, 2pc oring, 4pc wear band and 6pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 332-G9281 on JCB JS200 JS220. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 332-G9281.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071817933,"sku":"SK.332-G9281-JCB.BI.OEM","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_f9956bb7-2b79-4dd1-91fa-29ca6ea05bb0.jpg?v=1794372099"},{"product_id":"332-g9282-boom-cylinder-seal-kit-fits-jcb-85mm-rod-x-125mm-bore","title":"332-G9282 Boom Cylinder Seal Kit Fits JCB, 85mm rod x 125mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 332-G9282, for the boom cylinder. It is sized for a 85mm rod x 125mm bore cylinder. Kit contents: Wiper, 2pc U cup, T seal, 2pc oring, 4pc wear band and 6pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e332-G9282\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 125mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc U cup, T seal, 2pc oring, 4pc wear band and 6pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 332-G9282. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 332-G9282.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855071850701,"sku":"SK.332-G9282-JCB.BI.OEM","price":211.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_560718f0-7e8f-4353-b427-b17654951490.jpg?v=1794372101"},{"product_id":"448-17201-steering-cylinder-seal-kit-fits-jcb-527-55-42mm-rod-x-75mm-bore","title":"448-17201 Steering Cylinder Seal Kit Fits JCB 527-55, 42mm rod x 75mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 448-17201, for the steering cylinder on JCB 527-55. It is sized for a 42mm rod x 75mm bore cylinder. Kit contents: Wiper, U cup, Buffer, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e448-17201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 527-55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e42mm rod x 75mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01014357-01014999, 01068000-0106999 01069457-01069548, 01417000-01419999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 448-17201 on JCB 527-55, serial range 01014357-01014999, 01068000-0106999 01069457-01069548, 01417000-01419999. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 448-17201.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855079387341,"sku":"SK.448-17201-JCB.BI.OEM","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_ec18e86d-0d98-418b-9568-bcef0bee8050.jpg?v=1794372427"},{"product_id":"545-45307-hydraulic-cylinder-seal-kit-fits-jcb-2in-rod-x-2-3-8mm-bore","title":"545-45307 Hydraulic Cylinder Seal Kit Fits JCB, 2\" rod x 2-3\/8mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 545-45307. It is sized for a 2\" rod x 2-3\/8mm bore cylinder. Kit contents: Wiper, 2 Buffer, Piston, 3pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e545-45307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2\" rod x 2-3\/8mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2 Buffer, Piston, 3pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 545-45307. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 545-45307.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083417805,"sku":"SK.545-45307-JCB.BI.OEM","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_da87bdd3-e3df-4559-85c2-ec43be4f8773.jpg?v=1794372593"},{"product_id":"547-42102-hydraulic-cylinder-seal-kit-fits-jcb-505-19-22-2in-rod-x-2-3-8mm-bore","title":"547-42102 Hydraulic Cylinder Seal Kit Fits JCB 505 -19 -22, 2\" rod x 2-3\/8mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 547-42102 on JCB 505 -19 -22. It is sized for a 2\" rod x 2-3\/8mm bore cylinder. Kit contents: Wiper, 2pc U cup, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e547-42102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 505 -19 -22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2\" rod x 2-3\/8mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc U cup, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 547-42102 on JCB 505 -19 -22. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 547-42102.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083450573,"sku":"SK.547-42102-JCB.BI.OEM","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_4f399728-9802-4dc6-a393-dc36316ac8cb.jpg?v=1794372593"},{"product_id":"548-12801-hydraulic-cylinder-seal-kit-fits-jcb-2cx-2in-rod-x-25mm-bore","title":"548-12801 Hydraulic Cylinder Seal Kit Fits JCB 2CX, 2\" rod x 25mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 548-12801 on JCB 2CX. It is sized for a 2\" rod x 25mm bore cylinder. Kit contents: Wiper, U cup and 5 pc Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e548-12801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 2CX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2\" rod x 25mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup and 5 pc Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 548-12801 on JCB 2CX. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 548-12801.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083483341,"sku":"SK.548-12801-JCB.BI.OEM","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1efc0f9a-6e82-4bf1-b439-8450d7ca2467.jpg?v=1794372595"},{"product_id":"556-08300k-extension-cylinder-seal-kit-fits-jcb-525b-4hl-50mm-rod-x-70mm-bore","title":"556-08300K Extension Cylinder Seal Kit Fits JCB 525B-4HL, 50mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 556-08300K, for the extension cylinder on JCB 525B-4HL. It is sized for a 50mm rod x 70mm bore cylinder. Kit contents: Wiper, U seal and 5 pc Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e556-08300K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 525B-4HL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eExtension Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and 5 pc Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 556-08300K on JCB 525B-4HL. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 556-08300K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083516109,"sku":"SK.556-08300K-JCB.BI.OEM","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_fc1eab7a-53b6-4573-ade5-10e31dba0879.jpg?v=1794372596"},{"product_id":"556-24900k-extension-cylinder-seal-kit-fits-jcb-505-19-22-50mm-rod-x-70mm-bore","title":"556-24900K Extension Cylinder Seal Kit Fits JCB 505-19 -22, 50mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 556-24900K, for the extension cylinder on JCB 505-19 -22. It is sized for a 50mm rod x 70mm bore cylinder. Kit contents: Wiper, U seal and 5 pc Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e556-24900K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 505-19 -22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eExtension Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM561011-M579360\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and 5 pc Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 556-24900K on JCB 505-19 -22, serial range M561011-M579360. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 556-24900K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083548877,"sku":"SK.556-24900K-JCB.BI.OEM","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_f5262400-ca04-4fc6-8c33-db638e0c2023.jpg?v=1794372598"},{"product_id":"557-06700k-extension-cylinder-seal-kit-fits-jcb-530b-4hl-60mm-rod-x-90mm-bore","title":"557-06700K Extension Cylinder Seal Kit Fits JCB 530B-4HL, 60mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 557-06700K, for the extension cylinder on JCB 530B-4HL. It is sized for a 60mm rod x 90mm bore cylinder. Kit contents: Wiper, U seal and 5 pc Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e557-06700K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 530B-4HL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eExtension Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e60mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM580001-M584435\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and 5 pc Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 557-06700K on JCB 530B-4HL, serial range M580001-M584435. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 557-06700K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083581645,"sku":"SK.557-06700K-JCB.BI.OEM","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_21065725-1e00-4fa1-8ac7-1ffcdc1291b2.jpg?v=1794372599"},{"product_id":"561-10200k-tilt-cylinder-seal-kit-fits-jcb-525b-4hl-60mm-rod-x-110mm-bore","title":"561-10200K Tilt Cylinder Seal Kit Fits JCB 525B-4HL, 60mm rod x 110mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 561-10200K, for the tilt cylinder on JCB 525B-4HL. It is sized for a 60mm rod x 110mm bore cylinder. Kit contents: Wiper, Special rod seal and 5 pc Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e561-10200K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 525B-4HL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTilt Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e60mm rod x 110mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM272000-M276567\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Special rod seal and 5 pc Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 561-10200K on JCB 525B-4HL, serial range M272000-M276567. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 561-10200K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855083614413,"sku":"SK.561-10200K-JCB.BI.OEM","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_e8e82901-1ede-4cbe-9181-e4be1d8788f4.jpg?v=1794372600"},{"product_id":"690-00693-boom-cylinder-seal-kit-fits-jcb-js130-75mm-rod-x-100mm-bore","title":"690-00693 Boom Cylinder Seal Kit Fits JCB JS130, 75mm rod x 100mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 690-00693, for the boom cylinder on JCB JS130. It is sized for a 75mm rod x 100mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e690-00693\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75mm rod x 100mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01058001-01058049 JS130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 690-00693 on JCB JS130, serial range 01058001-01058049 JS130. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 690-00693.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855089283277,"sku":"SK.690-00693-JCB.BI.OEM","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_c053c606-8ab9-4251-a695-e84876414122.jpg?v=1794372821"},{"product_id":"690-00754-bucket-cylinder-seal-kit-fits-jcb-js200-434e-100mm-rod-x-135mm-bore","title":"690-00754 Bucket Cylinder Seal Kit Fits JCB JS200 434E, 100mm rod x 135mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 690-00754, for the bucket cylinder on JCB JS200 434E. It is sized for a 100mm rod x 135mm bore cylinder. Kit contents: Wiper, U cup, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e690-00754\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS200 434E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e100mm rod x 135mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e00705410-00707999 JS200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 690-00754 on JCB JS200 434E, serial range 00705410-00707999 JS200. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 690-00754.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855089316045,"sku":"SK.690-00754-JCB.BI.OEM","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_7a0dd4c3-f0fb-44b2-ae04-33cf00f0c58e.jpg?v=1794372822"},{"product_id":"690-00801-bucket-cylinder-seal-kit-fits-jcb-js200-js220-80mm-rod-x-120mm-bore","title":"690-00801 Bucket Cylinder Seal Kit Fits JCB JS200 JS220, 80mm rod x 120mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 690-00801, for the bucket cylinder on JCB JS200 JS220. It is sized for a 80mm rod x 120mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e690-00801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS200 JS220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e80mm rod x 120mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e00705410-00707999 JS220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 690-00801 on JCB JS200 JS220, serial range 00705410-00707999 JS220. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 690-00801.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855089348813,"sku":"SK.690-00801-JCB.BI.OEM","price":142.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_0de153c6-f025-4e92-bcc5-a4f6d8e0cfce.jpg?v=1794372825"},{"product_id":"903-20222-hydraulic-cylinder-seal-kit-fits-jcb-js330-110mm-rod-x-160mm-bore","title":"903-20222 Hydraulic Cylinder Seal Kit Fits JCB JS330, 110mm rod x 160mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20222 on JCB JS330. It is sized for a 110mm rod x 160mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20222\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e110mm rod x 160mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e00712780-00713999 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20222 on JCB JS330, serial range 00712780-00713999 JS330. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20222.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855121985741,"sku":"SK.903-20222-JCB.BI.OEM","price":293.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_2ab6586e-b5af-4f7b-bda6-bddf27ba5d17.jpg?v=1794374194"},{"product_id":"903-20233-boom-bucket-cylinder-seal-kit-fits-jcb-js220-js330-95mm-rod-x-140mm-bore","title":"903-20233 Boom\/Bucket Cylinder Seal Kit Fits JCB JS220 JS330, 95mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20233, for the boom\/bucket cylinder on JCB JS220 JS330. It is sized for a 95mm rod x 140mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20233\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS220 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom\/Bucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01701500-01702499 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20233 on JCB JS220 JS330, serial range 01701500-01702499 JS330. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20233.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122018509,"sku":"SK.903-20233-JCB.BI.OEM","price":255.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1f368f75-7848-488e-bb61-43113d9b1702.jpg?v=1794374198"},{"product_id":"903-20265-hydraulic-cylinder-seal-kit-fits-jcb-85mm-rod-x-120mm-bore","title":"903-20265 Hydraulic Cylinder Seal Kit Fits JCB, 85mm rod x 120mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20265. It is sized for a 85mm rod x 120mm bore cylinder. Kit contents: Wiper, U seal, Buffer, orings, backup and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 120mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer, orings, backup and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20265. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20265.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122051277,"sku":"SK.903-20265-JCB.BI.OEM","price":207.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_04ec1403-9c3d-4ea0-99ec-5463bb0497e6.jpg?v=1794374199"},{"product_id":"903-20405-dozer-cylinder-seal-kit-fits-jcb-8025-8027-8030-8032-8035-45mm-rod-x-90mm-bore","title":"903-20405 Dozer Cylinder Seal Kit Fits JCB 8025 8027 8030 8032 8035, 45mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20405, for the dozer cylinder on JCB 8025 8027 8030 8032 8035. It is sized for a 45mm rod x 90mm bore cylinder. Kit contents: Wiper, U seal, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 8025 8027 8030 8032 8035\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDozer Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e45mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01226500-01228500 8027Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20405 on JCB 8025 8027 8030 8032 8035, serial range 01226500-01228500 8027Z. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20405.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122084045,"sku":"SK.903-20405-JCB.BI.OEM","price":96.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_79e5cad6-1a8d-42a6-b778-d1c18e14ddc9.jpg?v=1794374198"},{"product_id":"903-20418-swing-cylinder-seal-kit-fits-jcb-8025-8027-8030-8032-8035-40mm-rod-x-80mm-bore","title":"903-20418 Swing Cylinder Seal Kit Fits JCB 8025 8027 8030 8032 8035, 40mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20418, for the swing cylinder on JCB 8025 8027 8030 8032 8035. It is sized for a 40mm rod x 80mm bore cylinder. Kit contents: Wiper, U seal, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20418\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 8025 8027 8030 8032 8035\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSwing Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01226500-01228500 8027Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20418 on JCB 8025 8027 8030 8032 8035, serial range 01226500-01228500 8027Z. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20418.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122116813,"sku":"SK.903-20418-JCB.BI.OEM","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_d1c22e0b-d49d-431d-ab46-39053f506daa.jpg?v=1794374199"},{"product_id":"903-20434-hydraulic-cylinder-seal-kit-fits-jcb-8027-8032-40mm-rod-x-65mm-bore","title":"903-20434 Hydraulic Cylinder Seal Kit Fits JCB 8027 8032, 40mm rod x 65mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20434 on JCB 8027 8032. It is sized for a 40mm rod x 65mm bore cylinder. Kit contents: Wiper, U seal, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20434\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 8027 8032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 65mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20434 on JCB 8027 8032. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20434.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122149581,"sku":"SK.903-20434-JCB.BI.OEM","price":121.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_d328bab4-9c41-460d-8e1f-d8e435391a7b.jpg?v=1794374203"},{"product_id":"903-20839-bucket-cylinder-seal-kit-fits-jcb-js260-jz140-70mm-rod-x-95mm-bore","title":"903-20839 Bucket Cylinder Seal Kit Fits JCB JS260 JZ140, 70mm rod x 95mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20839, for the bucket cylinder on JCB JS260 JZ140. It is sized for a 70mm rod x 95mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20839\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS260 JZ140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70mm rod x 95mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01040003-01041999 JS260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20839 on JCB JS260 JZ140, serial range 01040003-01041999 JS260. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20839.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122182349,"sku":"SK.903-20839-JCB.BI.OEM","price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_22bd696b-bd69-4bd9-bbe1-e7505695a636.jpg?v=1794374204"},{"product_id":"903-20856-hydraulic-cylinder-seal-kit-fits-jcb-jz140-80mm-rod-x-115mm-bore","title":"903-20856 Hydraulic Cylinder Seal Kit Fits JCB JZ140, 80mm rod x 115mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20856 on JCB JZ140. It is sized for a 80mm rod x 115mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20856\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JZ140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e80mm rod x 115mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01137000-01137574 JZ140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20856 on JCB JZ140, serial range 01137000-01137574 JZ140. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20856.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122215117,"sku":"SK.903-20856-JCB.BI.OEM","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_06381f5e-587e-4585-8e82-1d1671bccbde.jpg?v=1794374204"},{"product_id":"903-20862-boom-cylinder-seal-kit-fits-jcb-jz140-75mm-rod-x-100mm-bore","title":"903-20862 Boom Cylinder Seal Kit Fits JCB JZ140, 75mm rod x 100mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-20862, for the boom cylinder on JCB JZ140. It is sized for a 75mm rod x 100mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-20862\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JZ140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75mm rod x 100mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01137000-01137574 JZ140\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-20862 on JCB JZ140, serial range 01137000-01137574 JZ140. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-20862.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122247885,"sku":"SK.903-20862-JCB.BI.OEM","price":150.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_47e1438a-63e4-466b-bc16-cf6f78f56cbf.jpg?v=1794374205"},{"product_id":"903-21024-boom-bucket-cylinder-seal-kit-fits-jcb-js330-100mm-rod-x-140mm-bore","title":"903-21024 Boom\/Bucket Cylinder Seal Kit Fits JCB JS330, 100mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-21024, for the boom\/bucket cylinder on JCB JS330. It is sized for a 100mm rod x 140mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-21024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom\/Bucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e100mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e00712952-00713999 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-21024 on JCB JS330, serial range 00712952-00713999 JS330. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-21024.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122280653,"sku":"SK.903-21024-JCB.BI.OEM","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_5d8e3131-2f2a-4089-92b3-de3ec7c162e1.jpg?v=1794374209"},{"product_id":"903-21049-bucket-cylinder-seal-kit-fits-jcb-js240-95mm-rod-x-130mm-bore","title":"903-21049 Bucket Cylinder Seal Kit Fits JCB JS240, 95mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-21049, for the bucket cylinder on JCB JS240. It is sized for a 95mm rod x 130mm bore cylinder. Kit contents: Wiper, U seal, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-21049\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01504700-01505099, 01040003-0104199\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-21049 on JCB JS240, serial range 01504700-01505099, 01040003-0104199. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-21049.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122313421,"sku":"SK.903-21049-JCB.BI.OEM","price":140.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_5b9c219d-4a45-48ac-920d-fcd5b7cd9bee.jpg?v=1794374210"},{"product_id":"903-21037-boom-cylinder-seal-kit-fits-jcb-js240-90mm-rod-x-130mm-bore","title":"903-21037 Boom Cylinder Seal Kit Fits JCB JS240, 90mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-21037, for the boom cylinder on JCB JS240. It is sized for a 90mm rod x 130mm bore cylinder. Kit contents: Wiper, U seal, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-21037\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01504700-01505099, 01040003-0104199\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-21037 on JCB JS240, serial range 01504700-01505099, 01040003-0104199. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-21037.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122346189,"sku":"SK.903-21037-JCB.BI.OEM","price":190.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_eec119ed-33d1-445a-9ea7-01929f3af18e.jpg?v=1794374209"},{"product_id":"903-21061-hydraulic-cylinder-seal-kit-fits-jcb-js330-110mm-rod-x-160mm-bore","title":"903-21061 Hydraulic Cylinder Seal Kit Fits JCB JS330, 110mm rod x 160mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-21061 on JCB JS330. It is sized for a 110mm rod x 160mm bore cylinder. Kit contents: Wiper, U seal, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-21061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e110mm rod x 160mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e00712952-00713999 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-21061 on JCB JS330, serial range 00712952-00713999 JS330. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-21061.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122378957,"sku":"SK.903-21061-JCB.BI.OEM","price":240.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_be84ecbf-7df3-4035-817e-7f63c759f153.jpg?v=1794374210"},{"product_id":"903-21071-boom-bucket-cylinder-seal-kit-fits-jcb-js220-js330-95mm-rod-x-140mm-bore","title":"903-21071 Boom\/Bucket Cylinder Seal Kit Fits JCB JS220 JS330, 95mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-21071, for the boom\/bucket cylinder on JCB JS220 JS330. It is sized for a 95mm rod x 140mm bore cylinder. Kit contents: Wiper, U seal, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-21071\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS220 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom\/Bucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e00712952-00713999 JS330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-21071 on JCB JS220 JS330, serial range 00712952-00713999 JS330. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-21071.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122411725,"sku":"SK.903-21071-JCB.BI.OEM","price":201.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1c36def9-dd3c-457e-bbe2-aeff20b29aaf.jpg?v=1794374214"},{"product_id":"903-21165-hydraulic-cylinder-seal-kit-fits-jcb-js240-100mm-rod-x-140mm-bore","title":"903-21165 Hydraulic Cylinder Seal Kit Fits JCB JS240, 100mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 903-21165 on JCB JS240. It is sized for a 100mm rod x 140mm bore cylinder. Kit contents: Wiper, U cup, Buffer and 4 pc Capped T Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e903-21165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB JS240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e100mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e01504700-01505099, 01040003-0104199\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer and 4 pc Capped T Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 903-21165 on JCB JS240, serial range 01504700-01505099, 01040003-0104199. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 903-21165.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855122444493,"sku":"SK.903-21165-JCB.BI.OEM","price":195.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_257a7d5c-89bd-4a13-a8a3-80029ca5b5b9.jpg?v=1794374215"},{"product_id":"980-35603-hydraulic-cylinder-seal-kit-fits-jcb-505-19-fpm-22-2in-rod-x-3in-bore","title":"980-35603 Hydraulic Cylinder Seal Kit Fits JCB 505-19 F.M -22, 2\" rod x 3\" bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your JCB leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for JCB seal kit 980-35603 on JCB 505-19 F.M -22. It is sized for a 2\" rod x 3\" bore cylinder. Kit contents: Wiper, U cup and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e980-35603\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eJCB 505-19 F.M -22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2\" rod x 3\" bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces JCB part number 980-35603 on JCB 505-19 F.M -22. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace JCB kit 980-35603.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with JCB. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855125786829,"sku":"SK.980-35603-JCB.BI.OEM","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_4822faec-2e92-4b96-bd46-23f127ebf568.jpg?v=1794374350"}],"url":"https:\/\/beaverislandparts.com\/collections\/jcb-hydraulic-seal-kits.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}