{"title":"Kato Hydraulic Seal Kits","description":"\u003cp\u003eAftermarket hydraulic cylinder seal kits for Kato equipment, listed by OEM kit number. Each listing gives the machine models, rod and bore sizes and the kit contents.\u003c\/p\u003e","products":[{"product_id":"309-75400001-arm-cylinder-seal-kit-fits-kato-arm-cylinder-fits-hd770seii-90mm-rod-x-130mm","title":"309-75400001 Arm Cylinder Seal Kit Fits Kato Arm Cylinder fits HD770SEII, 90mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-75400001, for the arm cylinder on Kato Arm Cylinder fits HD770SEII. It is sized for a 90mm rod x 130mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-75400001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder fits HD770SEII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-75400001 on Kato Arm Cylinder fits HD770SEII. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-75400001.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068606669,"sku":"SK.309-75400001-KAT.BI.OEM","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_8c94008c-6896-425d-a3ab-3d3c411dfa42.jpg?v=1794371966"},{"product_id":"309-75500001-arm-cylinder-seal-kit-fits-kato-arm-cylinder-fits-hd800-hd880-100mm-rod-x-140","title":"309-75500001 Arm Cylinder Seal Kit Fits Kato Arm Cylinder fits HD800 HD880, 100mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-75500001, for the arm cylinder on Kato Arm Cylinder fits HD800 HD880. It is sized for a 100mm rod x 140mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-75500001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder fits HD800 HD880\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e100mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-75500001 on Kato Arm Cylinder fits HD800 HD880. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-75500001.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068639437,"sku":"SK.309-75500001-KAT.BI.OEM","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_6a539dc8-9797-47c6-bfc9-acf3c9f9fc72.jpg?v=1794371969"},{"product_id":"309-78500001-bucket-cylinder-seal-kit-fits-kato-bucket-cylinder-hd770-85mm-rod-x-130mm-bor","title":"309-78500001 Bucket Cylinder Seal Kit Fits Kato Bucket Cylinder HD770, 85mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-78500001, for the bucket cylinder on Kato Bucket Cylinder HD770. It is sized for a 85mm rod x 130mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-78500001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Bucket Cylinder HD770\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-785-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-78500001 on Kato Bucket Cylinder HD770, serial range 309-785-1. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-78500001.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068672205,"sku":"SK.309-78500001-KAT.BI.OEM","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_c40b031d-58fb-4e47-b5ef-da85bf75aad3.jpg?v=1794371970"},{"product_id":"309-78600001-hydraulic-cylinder-seal-kit-fits-kato-bucket-hd800-hd880-85mm-rod-x-125mm-bor","title":"309-78600001 Hydraulic Cylinder Seal Kit Fits Kato Bucket HD800 HD880, 85mm rod x 125mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-78600001 on Kato Bucket HD800 HD880. It is sized for a 85mm rod x 125mm bore cylinder. Kit contents: Wiper, U cup, oring, backup, Buffer and Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-78600001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Bucket HD800 HD880\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 125mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, oring, backup, Buffer and Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-78600001 on Kato Bucket HD800 HD880. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-78600001.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068704973,"sku":"SK.309-78600001-KAT.BI.OEM","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_154f41da-d658-43a3-975e-85dc89282ed1.jpg?v=1794371970"},{"product_id":"309-78600011-hydraulic-cylinder-seal-kit-fits-kato-bucket-hd900sev-85mm-rod-x-130mm-bore","title":"309-78600011 Hydraulic Cylinder Seal Kit Fits Kato Bucket HD900SEV, 85mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-78600011 on Kato Bucket HD900SEV. It is sized for a 85mm rod x 130mm bore cylinder. Kit contents: Wiper, U cup, 2pc oring, 2pc backup, 4pc wear band, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-78600011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Bucket HD900SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, 2pc oring, 2pc backup, 4pc wear band, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-78600011 on Kato Bucket HD900SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-78600011.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068737741,"sku":"SK.309-78600011-KAT.BI.OEM","price":176.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_14bad63e-2697-4260-90d4-6d5bd2907ff8.jpg?v=1794371971"},{"product_id":"309-78690010-bucket-cylinder-seal-kit-fits-kato-bucket-cylinder-hd800vii-85mm-rod-x-130mm","title":"309-78690010 Bucket Cylinder Seal Kit Fits Kato Bucket Cylinder HD800VII, 85mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-78690010, for the bucket cylinder on Kato Bucket Cylinder HD800VII. It is sized for a 85mm rod x 130mm bore cylinder. Kit contents: Wiper, U cup, 2pc oring, Buffer, 5 pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-78690010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Bucket Cylinder HD800VII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBucket Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, 2pc oring, Buffer, 5 pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-78690010 on Kato Bucket Cylinder HD800VII. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-78690010.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068770509,"sku":"SK.309-78690010-KAT.BI.OEM","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_14710fe9-d7e7-4ef2-93b5-69d6523fe69d.jpg?v=1794371974"},{"product_id":"309-96000002-boom-fits-kato-cylinder-seal-kit-fits-kato-cylinder-hd770seii-hd770se-ii-85mm","title":"309-96000002 Boom fits Kato Cylinder Seal Kit Fits Kato Cylinder HD770SEII HD770SE-II, 85mm rod x 130mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-96000002, for the boom fits kato cylinder on Kato Cylinder HD770SEII HD770SE-II. It is sized for a 85mm rod x 130mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-96000002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Cylinder HD770SEII HD770SE-II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom fits Kato Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 130mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-96000002 on Kato Cylinder HD770SEII HD770SE-II. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-96000002.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068803277,"sku":"SK.309-96000002-KAT.BI.OEM","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_dc5be21a-6d41-41ba-9f1d-ceaa10ab58b8.jpg?v=1794371975"},{"product_id":"309-96700011-boom-cylinder-seal-kit-fits-kato-boom-cylinder-hd900-sev-85mm-rod-x-140mm-bor","title":"309-96700011 Boom Cylinder Seal Kit Fits Kato Boom Cylinder HD900-SEV, 85mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 309-96700011, for the boom cylinder on Kato Boom Cylinder HD900-SEV. It is sized for a 85mm rod x 140mm bore cylinder. Kit contents: Wiper, U cup,Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e309-96700011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Boom Cylinder HD900-SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup,Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 309-96700011 on Kato Boom Cylinder HD900-SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 309-96700011.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855068836045,"sku":"SK.309-96700011-KAT.BI.OEM","price":188.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1bfc0863-f50d-4bdd-a1ce-fa1de9c68de1.jpg?v=1794371976"},{"product_id":"329-11690000-boom-cylinder-seal-kit-fits-kato-boom-cylinder-hd900-sev-85mm-rod-x-125mm-bor","title":"329-11690000 Boom Cylinder Seal Kit Fits Kato Boom Cylinder HD900-SEV, 85mm rod x 125mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-11690000, for the boom cylinder on Kato Boom Cylinder HD900-SEV. It is sized for a 85mm rod x 125mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-11690000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Boom Cylinder HD900-SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 125mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-11690000 on Kato Boom Cylinder HD900-SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-11690000.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070277837,"sku":"SK.329-11690000-KAT.BI.OEM","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_73c8606c-212a-4ca4-8496-c73f73e3c162.jpg?v=1794372037"},{"product_id":"329-12100002-boom-cylinder-seal-kit-fits-kato-boom-cylinder-hd900-sev-100mm-rod-x-150mm-bo","title":"329-12100002 Boom Cylinder Seal Kit Fits Kato Boom Cylinder HD900-SEV, 100mm rod x 150mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-12100002, for the boom cylinder on Kato Boom Cylinder HD900-SEV. It is sized for a 100mm rod x 150mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-12100002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Boom Cylinder HD900-SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e100mm rod x 150mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 5pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-12100002 on Kato Boom Cylinder HD900-SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-12100002.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070310605,"sku":"SK.329-12100002-KAT.BI.OEM","price":212.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_353b06de-262b-4a22-baaf-9f0a9c48629d.jpg?v=1794372036"},{"product_id":"329-13990000-boom-cylinder-seal-kit-fits-kato-boom-cylinder-hd800vi-85mm-rod-x-140mm-bore","title":"329-13990000 Boom Cylinder Seal Kit Fits Kato Boom Cylinder HD800VI, 85mm rod x 140mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-13990000, for the boom cylinder on Kato Boom Cylinder HD800VI. It is sized for a 85mm rod x 140mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2 pc backup, 5pc wearband and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-13990000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Boom Cylinder HD800VI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBoom Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm rod x 140mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2 pc backup, 5pc wearband and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-13990000 on Kato Boom Cylinder HD800VI. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-13990000.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070343373,"sku":"SK.329-13990000-KAT.BI.OEM","price":203.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_deb84ed1-626f-4d17-a222-2ee4c4935a0e.jpg?v=1794372038"},{"product_id":"329-17190000-arm-cylinder-seal-kit-fits-kato-arm-cylinder-hd700-hd720-95mm-rod-x-135mm-bor","title":"329-17190000 Arm Cylinder Seal Kit Fits Kato Arm Cylinder HD700 HD720, 95mm rod x 135mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-17190000, for the arm cylinder on Kato Arm Cylinder HD700 HD720. It is sized for a 95mm rod x 135mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2 pc oring, 2pc backup and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-17190000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder HD700 HD720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e95mm rod x 135mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSerial range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e32-1719-0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2 pc oring, 2pc backup and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-17190000 on Kato Arm Cylinder HD700 HD720, serial range 32-1719-0. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-17190000.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070376141,"sku":"SK.329-17190000-KAT.BI.OEM","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1748b042-9e18-4089-8ef7-e7e46d974618.jpg?v=1794372039"},{"product_id":"329-17200001-arm-cylinder-seal-kit-fits-kato-arm-cylinder-hd900sev-105mm-rod-x-150mm-bore","title":"329-17200001 Arm Cylinder Seal Kit Fits Kato Arm Cylinder HD900SEV, 105mm rod x 150mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-17200001, for the arm cylinder on Kato Arm Cylinder HD900SEV. It is sized for a 105mm rod x 150mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2 pc oring, 2pc backup, 4 pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-17200001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder HD900SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e105mm rod x 150mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2 pc oring, 2pc backup, 4 pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-17200001 on Kato Arm Cylinder HD900SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-17200001.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070408909,"sku":"SK.329-17200001-KAT.BI.OEM","price":204.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_f415a39c-312b-4c40-9d2a-fe01799969ff.jpg?v=1794372042"},{"product_id":"329-17290000-arm-cylinder-seal-kit-fits-kato-arm-cylinder-hd800vii-105mm-rod-x-150mm-bore","title":"329-17290000 Arm Cylinder Seal Kit Fits Kato Arm Cylinder HD800VII, 105mm rod x 150mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-17290000, for the arm cylinder on Kato Arm Cylinder HD800VII. It is sized for a 105mm rod x 150mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2 pc oring, 2pc backup, 4 pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-17290000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder HD800VII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e105mm rod x 150mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2 pc oring, 2pc backup, 4 pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-17290000 on Kato Arm Cylinder HD800VII. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-17290000.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070441677,"sku":"SK.329-17290000-KAT.BI.OEM","price":204.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_6f0bcfbc-4b07-4f6a-b87a-86a7f1c9d21e.jpg?v=1794372042"},{"product_id":"329-17500003-arm-cylinder-seal-kit-fits-kato-arm-cylinder-fits-hd-1250sev-110mm-rod-x-160m","title":"329-17500003 Arm Cylinder Seal Kit Fits Kato Arm Cylinder Fits HD-1250SEV, 110mm rod x 160mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-17500003, for the arm cylinder on Kato Arm Cylinder Fits HD-1250SEV. It is sized for a 110mm rod x 160mm bore cylinder. Kit contents: Wiper, U cup, 2 pc oring, 2pc backup, 4pc wear band, Buffer and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-17500003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder Fits HD-1250SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e110mm rod x 160mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, 2 pc oring, 2pc backup, 4pc wear band, Buffer and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-17500003 on Kato Arm Cylinder Fits HD-1250SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-17500003.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070474445,"sku":"SK.329-17500003-KAT.BI.OEM","price":210.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_640f1bcb-74c9-414e-9f8b-425393a093c4.jpg?v=1794372044"},{"product_id":"329-17590000-arm-cylinder-seal-kit-fits-kato-arm-cylinder-fits-hd-1250vii-110mm-rod-x-160m","title":"329-17590000 Arm Cylinder Seal Kit Fits Kato Arm Cylinder Fits HD-1250VII, 110mm rod x 160mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-17590000, for the arm cylinder on Kato Arm Cylinder Fits HD-1250VII. It is sized for a 110mm rod x 160mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-17590000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder Fits HD-1250VII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e110mm rod x 160mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-17590000 on Kato Arm Cylinder Fits HD-1250VII. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-17590000.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070507213,"sku":"SK.329-17590000-KAT.BI.OEM","price":210.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_ded64c7b-f143-447a-b71e-6ddc560faf1c.jpg?v=1794372045"},{"product_id":"329-23890001-arm-cylinder-seal-kit-fits-kato-arm-cylinder-hd1250sev-80mm-rod-x-120mm-bore","title":"329-23890001 Arm Cylinder Seal Kit Fits Kato Arm Cylinder HD1250SEV, 80mm rod x 120mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Kato leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Kato seal kit 329-23890001, for the arm cylinder on Kato Arm Cylinder HD1250SEV. It is sized for a 80mm rod x 120mm bore cylinder. Kit contents: Wiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e329-23890001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKato Arm Cylinder HD1250SEV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArm Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e80mm rod x 120mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U cup, Buffer, 2pc oring, 2pc backup, 4pc wear band and Piston seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Kato part number 329-23890001 on Kato Arm Cylinder HD1250SEV. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Kato kit 329-23890001.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Kato. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855070539981,"sku":"SK.329-23890001-KAT.BI.OEM","price":177.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_bfc452f3-aa1f-49d7-9614-78f071ae0ca2.jpg?v=1794372047"}],"url":"https:\/\/beaverislandparts.com\/collections\/kato-hydraulic-seal-kits.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}