{"title":"Metric O-Rings, 1.9mm Cross-Section","description":"\u003cp\u003eMetric o-rings with a 1.9mm cross-section, listed by inside diameter and material. Every listing gives the ID and CS in millimetres and inches, the durometer and the temperature range, so you can match your groove or the ring you removed.\u003c\/p\u003e","products":[{"product_id":"m-p3-p-or-bi-jis-b70","title":"JIS P3 Buna-N Nitrile Metric O-Ring, 70A Durometer, 2.8mm ID x 1.9mm CS (0.110\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P3 o-ring, a standard metric sealing size measuring 2.8mm inside diameter by 1.9mm cross-section (0.110\" ID x 0.075\" CS, 6.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P3 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 2.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609768603853,"sku":"M.P3.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609768636621,"sku":"M.P3.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609768669389,"sku":"M.P3.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609768702157,"sku":"M.P3.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609768734925,"sku":"M.P3.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-006_a5186ef4-959b-4518-88e3-3a1b4e1c32ca.png?v=1785880785"},{"product_id":"m-p3-p-or-bi-jis-b90","title":"JIS P3 Buna-N Nitrile Metric O-Ring, 90A Durometer, 2.8mm ID x 1.9mm CS (0.110\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P3 o-ring, a standard metric sealing size measuring 2.8mm inside diameter by 1.9mm cross-section (0.110\" ID x 0.075\" CS, 6.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P3 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 2.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609768767693,"sku":"M.P3.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609768800461,"sku":"M.P3.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609768833229,"sku":"M.P3.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609768865997,"sku":"M.P3.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609768898765,"sku":"M.P3.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-006_391bcefa-2a33-4705-bd4f-90f0a284969a.png?v=1785880787"},{"product_id":"m-p3-p-or-bi-jis-v70","title":"JIS P3 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 2.8mm ID x 1.9mm CS (0.110\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P3 o-ring, a standard metric sealing size measuring 2.8mm inside diameter by 1.9mm cross-section (0.110\" ID x 0.075\" CS, 6.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P3 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 2.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609768931533,"sku":"M.P3.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609768964301,"sku":"M.P3.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609768997069,"sku":"M.P3.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609769029837,"sku":"M.P3.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609769062605,"sku":"M.P3.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-006_f3e6062b-37d4-48ea-bfe9-a6dac3d23061.png?v=1785880790"},{"product_id":"m-p4-p-or-bi-jis-b70","title":"JIS P4 Buna-N Nitrile Metric O-Ring, 70A Durometer, 3.8mm ID x 1.9mm CS (0.150\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P4 o-ring, a standard metric sealing size measuring 3.8mm inside diameter by 1.9mm cross-section (0.150\" ID x 0.075\" CS, 7.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P4 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 3.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609769095373,"sku":"M.P4.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609769128141,"sku":"M.P4.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609769160909,"sku":"M.P4.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609769193677,"sku":"M.P4.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609769226445,"sku":"M.P4.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-007_ef7f4566-2c9f-46c2-a9aa-5ecad9666869.png?v=1785880790"},{"product_id":"m-p4-p-or-bi-jis-b90","title":"JIS P4 Buna-N Nitrile Metric O-Ring, 90A Durometer, 3.8mm ID x 1.9mm CS (0.150\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P4 o-ring, a standard metric sealing size measuring 3.8mm inside diameter by 1.9mm cross-section (0.150\" ID x 0.075\" CS, 7.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P4 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 3.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609769259213,"sku":"M.P4.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609769291981,"sku":"M.P4.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609769324749,"sku":"M.P4.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609769357517,"sku":"M.P4.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609769390285,"sku":"M.P4.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-007_171ac796-b8a7-4fa7-bd88-13328d0ab256.png?v=1785880792"},{"product_id":"m-p4-p-or-bi-jis-v70","title":"JIS P4 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 3.8mm ID x 1.9mm CS (0.150\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P4 o-ring, a standard metric sealing size measuring 3.8mm inside diameter by 1.9mm cross-section (0.150\" ID x 0.075\" CS, 7.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P4 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 3.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609769423053,"sku":"M.P4.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609769455821,"sku":"M.P4.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609769488589,"sku":"M.P4.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609769521357,"sku":"M.P4.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609769554125,"sku":"M.P4.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-007_67c98bbe-ecff-4163-8fe9-8105b1076099.png?v=1785880794"},{"product_id":"m-p5-p-or-bi-jis-b70","title":"JIS P5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 4.8mm ID x 1.9mm CS (0.189\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P5 o-ring, a standard metric sealing size measuring 4.8mm inside diameter by 1.9mm cross-section (0.189\" ID x 0.075\" CS, 8.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 4.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609769586893,"sku":"M.P5.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609769619661,"sku":"M.P5.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609769652429,"sku":"M.P5.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609769685197,"sku":"M.P5.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609769717965,"sku":"M.P5.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-008_e4101fac-2bdc-4653-8dd9-75d212adcb63.png?v=1785880797"},{"product_id":"m-p5-p-or-bi-jis-b90","title":"JIS P5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 4.8mm ID x 1.9mm CS (0.189\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P5 o-ring, a standard metric sealing size measuring 4.8mm inside diameter by 1.9mm cross-section (0.189\" ID x 0.075\" CS, 8.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 4.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609769750733,"sku":"M.P5.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609769783501,"sku":"M.P5.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609769816269,"sku":"M.P5.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609769849037,"sku":"M.P5.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609769881805,"sku":"M.P5.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-008_47c71bf5-c255-4f1e-a19a-e3a05ece271b.png?v=1785880797"},{"product_id":"m-p5-p-or-bi-jis-v70","title":"JIS P5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 4.8mm ID x 1.9mm CS (0.189\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P5 o-ring, a standard metric sealing size measuring 4.8mm inside diameter by 1.9mm cross-section (0.189\" ID x 0.075\" CS, 8.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 4.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609769914573,"sku":"M.P5.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609769947341,"sku":"M.P5.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609769980109,"sku":"M.P5.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609770012877,"sku":"M.P5.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609770045645,"sku":"M.P5.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-008_3dbce892-b002-47ba-bad7-0b3beaed9987.png?v=1785880798"},{"product_id":"m-p6-p-or-bi-jis-b70","title":"JIS P6 Buna-N Nitrile Metric O-Ring, 70A Durometer, 5.8mm ID x 1.9mm CS (0.228\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P6 o-ring, a standard metric sealing size measuring 5.8mm inside diameter by 1.9mm cross-section (0.228\" ID x 0.075\" CS, 9.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P6 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 5.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609770078413,"sku":"M.P6.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609770111181,"sku":"M.P6.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609770143949,"sku":"M.P6.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609770176717,"sku":"M.P6.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609770209485,"sku":"M.P6.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-010_fe8c86da-6ca0-4cee-96f8-421393c0d39a.png?v=1785880802"},{"product_id":"m-p6-p-or-bi-jis-b90","title":"JIS P6 Buna-N Nitrile Metric O-Ring, 90A Durometer, 5.8mm ID x 1.9mm CS (0.228\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P6 o-ring, a standard metric sealing size measuring 5.8mm inside diameter by 1.9mm cross-section (0.228\" ID x 0.075\" CS, 9.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P6 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 5.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609770242253,"sku":"M.P6.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609770275021,"sku":"M.P6.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609770307789,"sku":"M.P6.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609770340557,"sku":"M.P6.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609770373325,"sku":"M.P6.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-010_4333edf5-7f02-4367-9385-a8185b4ab2e8.png?v=1785880804"},{"product_id":"m-p6-p-or-bi-jis-v70","title":"JIS P6 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 5.8mm ID x 1.9mm CS (0.228\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P6 o-ring, a standard metric sealing size measuring 5.8mm inside diameter by 1.9mm cross-section (0.228\" ID x 0.075\" CS, 9.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P6 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 5.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609770406093,"sku":"M.P6.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609770438861,"sku":"M.P6.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609770471629,"sku":"M.P6.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609770504397,"sku":"M.P6.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609770537165,"sku":"M.P6.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-010_e3ba1396-7014-4bd8-99cf-bc9746edda02.png?v=1785880804"},{"product_id":"m-p7-p-or-bi-jis-b70","title":"JIS P7 Buna-N Nitrile Metric O-Ring, 70A Durometer, 6.8mm ID x 1.9mm CS (0.268\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P7 o-ring, a standard metric sealing size measuring 6.8mm inside diameter by 1.9mm cross-section (0.268\" ID x 0.075\" CS, 10.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P7 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 6.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609770602701,"sku":"M.P7.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609770635469,"sku":"M.P7.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609770668237,"sku":"M.P7.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609770701005,"sku":"M.P7.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609770733773,"sku":"M.P7.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-010_f11d0995-5e6d-4098-bcb1-1ca5036e2366.png?v=1785880806"},{"product_id":"m-p7-p-or-bi-jis-b90","title":"JIS P7 Buna-N Nitrile Metric O-Ring, 90A Durometer, 6.8mm ID x 1.9mm CS (0.268\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P7 o-ring, a standard metric sealing size measuring 6.8mm inside diameter by 1.9mm cross-section (0.268\" ID x 0.075\" CS, 10.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P7 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 6.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609770766541,"sku":"M.P7.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609770799309,"sku":"M.P7.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609770832077,"sku":"M.P7.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609770864845,"sku":"M.P7.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609770897613,"sku":"M.P7.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-010_c227ff22-1466-4a28-8a51-4edfdbee2da3.png?v=1785880810"},{"product_id":"m-p7-p-or-bi-jis-v70","title":"JIS P7 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 6.8mm ID x 1.9mm CS (0.268\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P7 o-ring, a standard metric sealing size measuring 6.8mm inside diameter by 1.9mm cross-section (0.268\" ID x 0.075\" CS, 10.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P7 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 6.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609770930381,"sku":"M.P7.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609770963149,"sku":"M.P7.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609770995917,"sku":"M.P7.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609771028685,"sku":"M.P7.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609771061453,"sku":"M.P7.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-010_65f10b80-b5b6-42a0-9ad2-a0b4a0f2404c.png?v=1785880811"},{"product_id":"m-p8-p-or-bi-jis-b70","title":"JIS P8 Buna-N Nitrile Metric O-Ring, 70A Durometer, 7.8mm ID x 1.9mm CS (0.307\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P8 o-ring, a standard metric sealing size measuring 7.8mm inside diameter by 1.9mm cross-section (0.307\" ID x 0.075\" CS, 11.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P8 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 7.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609771094221,"sku":"M.P8.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609771126989,"sku":"M.P8.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609771159757,"sku":"M.P8.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609771192525,"sku":"M.P8.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609771225293,"sku":"M.P8.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-011_cf2cb47f-1f4f-41a3-a837-8f610d7cf93c.png?v=1785880811"},{"product_id":"m-p8-p-or-bi-jis-b90","title":"JIS P8 Buna-N Nitrile Metric O-Ring, 90A Durometer, 7.8mm ID x 1.9mm CS (0.307\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P8 o-ring, a standard metric sealing size measuring 7.8mm inside diameter by 1.9mm cross-section (0.307\" ID x 0.075\" CS, 11.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P8 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 7.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609771258061,"sku":"M.P8.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609771290829,"sku":"M.P8.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609771323597,"sku":"M.P8.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609771356365,"sku":"M.P8.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609771389133,"sku":"M.P8.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-011_23aba28b-e93b-4abb-95b4-f5a0d6c8a7d3.png?v=1785880813"},{"product_id":"m-p8-p-or-bi-jis-v70","title":"JIS P8 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 7.8mm ID x 1.9mm CS (0.307\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P8 o-ring, a standard metric sealing size measuring 7.8mm inside diameter by 1.9mm cross-section (0.307\" ID x 0.075\" CS, 11.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P8 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 7.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609771421901,"sku":"M.P8.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609771454669,"sku":"M.P8.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609771487437,"sku":"M.P8.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609771520205,"sku":"M.P8.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609771552973,"sku":"M.P8.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-011_0546c365-ab56-4db5-a1f5-b6920713f8a4.png?v=1785880817"},{"product_id":"m-p9-p-or-bi-jis-b70","title":"JIS P9 Buna-N Nitrile Metric O-Ring, 70A Durometer, 8.8mm ID x 1.9mm CS (0.346\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P9 o-ring, a standard metric sealing size measuring 8.8mm inside diameter by 1.9mm cross-section (0.346\" ID x 0.075\" CS, 12.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P9 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 8.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609771585741,"sku":"M.P9.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609771618509,"sku":"M.P9.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609771651277,"sku":"M.P9.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609771684045,"sku":"M.P9.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609771716813,"sku":"M.P9.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_546892ce-f80c-4448-bd1a-985fabb8f123.jpg?v=1785880818"},{"product_id":"m-p9-p-or-bi-jis-b90","title":"JIS P9 Buna-N Nitrile Metric O-Ring, 90A Durometer, 8.8mm ID x 1.9mm CS (0.346\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P9 o-ring, a standard metric sealing size measuring 8.8mm inside diameter by 1.9mm cross-section (0.346\" ID x 0.075\" CS, 12.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P9 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 8.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609771749581,"sku":"M.P9.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609771782349,"sku":"M.P9.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609771815117,"sku":"M.P9.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609771847885,"sku":"M.P9.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609771880653,"sku":"M.P9.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_8163a105-d57d-4cb3-b849-b00364b73e7d.jpg?v=1785880819"},{"product_id":"m-p9-p-or-bi-jis-v70","title":"JIS P9 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 8.8mm ID x 1.9mm CS (0.346\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P9 o-ring, a standard metric sealing size measuring 8.8mm inside diameter by 1.9mm cross-section (0.346\" ID x 0.075\" CS, 12.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P9 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 8.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609771913421,"sku":"M.P9.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609771946189,"sku":"M.P9.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609771978957,"sku":"M.P9.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609772011725,"sku":"M.P9.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609772044493,"sku":"M.P9.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_2193ab5b-e929-443e-b97c-c64526c8183b.jpg?v=1785880820"},{"product_id":"m-p10-p-or-bi-jis-b70","title":"JIS P10 Buna-N Nitrile Metric O-Ring, 70A Durometer, 9.8mm ID x 1.9mm CS (0.386\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P10 o-ring, a standard metric sealing size measuring 9.8mm inside diameter by 1.9mm cross-section (0.386\" ID x 0.075\" CS, 13.6mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P10 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 9.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609772077261,"sku":"M.P10.25.OR.BI.JIS.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609772110029,"sku":"M.P10.50.OR.BI.JIS.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609772142797,"sku":"M.P10.100.OR.BI.JIS.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609772175565,"sku":"M.P10.250.OR.BI.JIS.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609772208333,"sku":"M.P10.500.OR.BI.JIS.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_83c35ea4-d2d4-405e-ad6c-214ec0c74b32.jpg?v=1785880824"},{"product_id":"m-p10-p-or-bi-jis-b90","title":"JIS P10 Buna-N Nitrile Metric O-Ring, 90A Durometer, 9.8mm ID x 1.9mm CS (0.386\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P10 o-ring, a standard metric sealing size measuring 9.8mm inside diameter by 1.9mm cross-section (0.386\" ID x 0.075\" CS, 13.6mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P10 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 9.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609772241101,"sku":"M.P10.25.OR.BI.JIS.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609772273869,"sku":"M.P10.50.OR.BI.JIS.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609772306637,"sku":"M.P10.100.OR.BI.JIS.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609772339405,"sku":"M.P10.250.OR.BI.JIS.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609772372173,"sku":"M.P10.500.OR.BI.JIS.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_e6151135-631f-49e0-aa0d-b600b2c7699e.jpg?v=1785880826"},{"product_id":"m-p10-p-or-bi-jis-v70","title":"JIS P10 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 9.8mm ID x 1.9mm CS (0.386\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single JIS P10 o-ring, a standard metric sealing size measuring 9.8mm inside diameter by 1.9mm cross-section (0.386\" ID x 0.075\" CS, 13.6mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e JIS P10 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 9.8mm x 1.9mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48609772404941,"sku":"M.P10.25.OR.BI.JIS.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48609772437709,"sku":"M.P10.50.OR.BI.JIS.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48609772470477,"sku":"M.P10.100.OR.BI.JIS.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48609772503245,"sku":"M.P10.250.OR.BI.JIS.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48609772536013,"sku":"M.P10.500.OR.BI.JIS.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_3d478420-492f-4547-bea0-f1fea024cf73.jpg?v=1785880826"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-2p4mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 2.4mm ID x 1.9mm CS (0.094\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 2.4mm ID x 1.9mm CS (0.094\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 6.2mm (0.244\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 mm \/ 0.094 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.2 mm \/ 0.244 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 2.4mm ID x 1.9mm CS (0.094\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 2.4mm ID x 1.9mm CS (0.094\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853628485837,"sku":"OR.2p4x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853628518605,"sku":"OR.2p4x1p9.20.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853628551373,"sku":"OR.2p4x1p9.25.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_1387c63b-22c2-4c96-a0f5-cd270fcbb700.jpg?v=1794350500"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-2p6mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 2.6mm ID x 1.9mm CS (0.102\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 2.6mm ID x 1.9mm CS (0.102\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 6.4mm (0.252\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.6 mm \/ 0.102 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.4 mm \/ 0.252 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 2.6mm ID x 1.9mm CS (0.102\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 2.6mm ID x 1.9mm CS (0.102\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853628780749,"sku":"OR.2p6x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853628813517,"sku":"OR.2p6x1p9.20.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853628846285,"sku":"OR.2p6x1p9.25.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_31b87db6-3f82-4792-8269-1243f530a207.jpg?v=1794350503"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-3p4mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 3.4mm ID x 1.9mm CS (0.134\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 3.4mm ID x 1.9mm CS (0.134\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 7.2mm (0.283\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 mm \/ 0.134 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 mm \/ 0.283 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 3.4mm ID x 1.9mm CS (0.134\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 3.4mm ID x 1.9mm CS (0.134\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853640609997,"sku":"OR.3p4x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853640642765,"sku":"OR.3p4x1p9.20.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853640675533,"sku":"OR.3p4x1p9.25.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_d31ba768-5364-4e25-b682-5a9872cee03a.jpg?v=1794350667"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-4p2mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 8mm (0.315\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.2 mm \/ 0.165 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm \/ 0.315 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 4.2mm ID x 1.9mm CS (0.165\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853650178253,"sku":"OR.4p2x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853650211021,"sku":"OR.4p2x1p9.20.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853650243789,"sku":"OR.4p2x1p9.25.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_809984bf-4427-4ceb-bc4a-1df5d2176832.jpg?v=1794350795"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-4p9mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 4.9mm ID x 1.9mm CS (0.193\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 4.9mm ID x 1.9mm CS (0.193\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 8.7mm (0.343\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.9 mm \/ 0.193 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8.7 mm \/ 0.343 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 4.9mm ID x 1.9mm CS (0.193\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 4.9mm ID x 1.9mm CS (0.193\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853650899149,"sku":"OR.4p9x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853650931917,"sku":"OR.4p9x1p9.20.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853650964685,"sku":"OR.4p9x1p9.25.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_ec1de7a8-2944-46cb-adb5-a8f3f179e1a6.jpg?v=1794350806"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-6mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 6mm ID x 1.9mm CS (0.236\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 6mm ID x 1.9mm CS (0.236\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 9.8mm (0.386\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6 mm \/ 0.236 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9.8 mm \/ 0.386 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 6mm ID x 1.9mm CS (0.236\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 6mm ID x 1.9mm CS (0.236\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853665513677,"sku":"OR.6x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853665546445,"sku":"OR.6x1p9.20.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853665579213,"sku":"OR.6x1p9.25.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_64a1a5fe-0084-40f0-b26c-8201e7399f6f.jpg?v=1794351008"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-6p4mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 6.4mm ID x 1.9mm CS (0.252\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 6.4mm ID x 1.9mm CS (0.252\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 10.2mm (0.402\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.4 mm \/ 0.252 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10.2 mm \/ 0.402 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 6.4mm ID x 1.9mm CS (0.252\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 6.4mm ID x 1.9mm CS (0.252\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853665972429,"sku":"OR.6p4x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853666005197,"sku":"OR.6p4x1p9.20.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853666037965,"sku":"OR.6p4x1p9.25.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_176f4bf8-32c2-4069-9661-3be69a86d773.jpg?v=1794351015"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-7p2mm-id-x-1p9mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 7.2mm ID x 1.9mm CS (0.283\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 7.2mm ID x 1.9mm CS (0.283\" x 0.075\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 11mm (0.433\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 mm \/ 0.283 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11 mm \/ 0.433 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 7.2mm ID x 1.9mm CS (0.283\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 7.2mm ID x 1.9mm CS (0.283\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853671542989,"sku":"OR.7p2x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853671575757,"sku":"OR.7p2x1p9.20.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853671608525,"sku":"OR.7p2x1p9.25.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_3b08ed75-542c-421a-b336-e1cfe97c5ffa.jpg?v=1794351094"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-12mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 12mm ID x 1.9mm CS (0.472\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 12mm ID x 1.9mm CS (0.472\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 15.8mm (0.622\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12 mm \/ 0.472 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e15.8 mm \/ 0.622 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 12mm ID x 1.9mm CS (0.472\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 12mm ID x 1.9mm CS (0.472\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853705687245,"sku":"OR.12x1p9.25.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853705720013,"sku":"OR.12x1p9.50.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853705752781,"sku":"OR.12x1p9.100.BI.MET.B70","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_242ec889-0782-42f7-9f9f-da00440194ce.jpg?v=1794351565"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-12p2mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 12.2mm ID x 1.9mm CS (0.480\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 12.2mm ID x 1.9mm CS (0.480\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 16mm (0.630\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12.2 mm \/ 0.480 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e16 mm \/ 0.630 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 12.2mm ID x 1.9mm CS (0.480\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 12.2mm ID x 1.9mm CS (0.480\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853707260109,"sku":"OR.12p2x1p9.25.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853707292877,"sku":"OR.12p2x1p9.50.BI.MET.B70","price":29.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853707325645,"sku":"OR.12p2x1p9.100.BI.MET.B70","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_0b89c1bf-678f-434c-8990-af4d8e74a29e.jpg?v=1794351586"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-12p6mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 12.6mm ID x 1.9mm CS (0.496\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 12.6mm ID x 1.9mm CS (0.496\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 16.4mm (0.646\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12.6 mm \/ 0.496 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e16.4 mm \/ 0.646 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 12.6mm ID x 1.9mm CS (0.496\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 12.6mm ID x 1.9mm CS (0.496\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"15-Pack","offer_id":48853707817165,"sku":"OR.12p6x1p9.15.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853707849933,"sku":"OR.12p6x1p9.20.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853707882701,"sku":"OR.12p6x1p9.25.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_e9ff18a5-2cae-4cb2-af29-6edee495df90.jpg?v=1794351596"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-18p8mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 18.8mm ID x 1.9mm CS (0.740\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 18.8mm ID x 1.9mm CS (0.740\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 22.6mm (0.890\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e18.8 mm \/ 0.740 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22.6 mm \/ 0.890 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 18.8mm ID x 1.9mm CS (0.740\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 18.8mm ID x 1.9mm CS (0.740\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"15-Pack","offer_id":48853740323021,"sku":"OR.18p8x1p9.15.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853740355789,"sku":"OR.18p8x1p9.20.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853740388557,"sku":"OR.18p8x1p9.25.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_409747b0-a3e5-46c8-8b84-e0e7cdb7a60a.jpg?v=1794352052"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-1p9mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 1.9mm ID x 1.9mm CS (0.075\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 1.9mm ID x 1.9mm CS (0.075\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 5.7mm (0.224\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5.7 mm \/ 0.224 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 1.9mm ID x 1.9mm CS (0.075\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 1.9mm ID x 1.9mm CS (0.075\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853745795277,"sku":"OR.1p9x1p9.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853745828045,"sku":"OR.1p9x1p9.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853745860813,"sku":"OR.1p9x1p9.100.BI.MET.B70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_89c9848b-fe12-4ac5-9f78-bead852aa067.jpg?v=1794352129"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-2p4mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 2.4mm ID x 1.9mm CS (0.094\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 2.4mm ID x 1.9mm CS (0.094\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 6.3mm (0.248\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 mm \/ 0.094 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.3 mm \/ 0.248 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 2.4mm ID x 1.9mm CS (0.094\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 2.4mm ID x 1.9mm CS (0.094\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853776433357,"sku":"OR.2p4x1p9.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853776466125,"sku":"OR.2p4x1p9.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853776498893,"sku":"OR.2p4x1p9.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_d50cb098-ce4e-4f52-8ce2-858b3971ca22.jpg?v=1794352553"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-2p5mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 2.5mm ID x 1.9mm CS (0.098\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 2.5mm ID x 1.9mm CS (0.098\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 6.4mm (0.252\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 mm \/ 0.098 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.4 mm \/ 0.252 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 2.5mm ID x 1.9mm CS (0.098\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 2.5mm ID x 1.9mm CS (0.098\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"40-Pack","offer_id":48853777023181,"sku":"OR.2p5x1p9.40.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853777055949,"sku":"OR.2p5x1p9.50.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853777088717,"sku":"OR.2p5x1p9.100.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_c168ef28-224a-4532-9537-47c5e19f33fd.jpg?v=1794352562"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-4p2mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 8.6mm (0.339\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.2 mm \/ 0.165 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8.6 mm \/ 0.339 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 4.2mm ID x 1.9mm CS (0.165\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853816508621,"sku":"OR.4p2x1p9.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853816541389,"sku":"OR.4p2x1p9.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853816574157,"sku":"OR.4p2x1p9.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_be81a097-8db2-4c83-8567-d5f905d3f6a5.jpg?v=1794353116"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-7p2mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 7.2mm ID x 1.9mm CS (0.283\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 7.2mm ID x 1.9mm CS (0.283\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 11mm (0.433\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2 mm \/ 0.283 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11 mm \/ 0.433 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 7.2mm ID x 1.9mm CS (0.283\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 7.2mm ID x 1.9mm CS (0.283\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853851144397,"sku":"OR.7p2x1p9.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853851177165,"sku":"OR.7p2x1p9.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853851209933,"sku":"OR.7p2x1p9.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_500c18a8-43eb-44bd-8afb-e5c10867fb38.jpg?v=1794353613"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-7p6mm-id-x-1p9mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 7.6mm ID x 1.9mm CS (0.299\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 7.6mm ID x 1.9mm CS (0.299\" x 0.075\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 11.4mm (0.449\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.6 mm \/ 0.299 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11.4 mm \/ 0.449 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 7.6mm ID x 1.9mm CS (0.299\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 7.6mm ID x 1.9mm CS (0.299\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853853077709,"sku":"OR.7p6x1p9.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853853110477,"sku":"OR.7p6x1p9.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853853143245,"sku":"OR.7p6x1p9.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_f142dee4-e2e0-42ef-a88a-cc0e664f6e10.jpg?v=1794353642"},{"product_id":"epdm-metric-o-ring-70a-durometer-2p6mm-id-x-1p9mm-cs","title":"EPDM Metric O-Ring, 70A Durometer, 2.6mm ID x 1.9mm CS (0.102\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 2.6mm ID x 1.9mm CS (0.102\" x 0.075\") size, molded in 70A EPDM. Its outside diameter is 6.4mm (0.252\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.6 mm \/ 0.102 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.4 mm \/ 0.252 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-65°F to +300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across potable and hot water systems, pool and spa equipment, irrigation, coolant and radiator systems, steam lines and brake systems. If your manual, parts list or old ring calls for 2.6mm ID x 1.9mm CS (0.102\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\u003cp\u003eEPDM is the right choice for water, steam, coolant and outdoor service where nitrile would age and crack. Recommended for hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Not recommended for petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Lubricate EPDM only with silicone-based grease such as \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e; petroleum grease and oil make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 2.6mm ID x 1.9mm CS (0.102\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is EPDM good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Avoid petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853972779213,"sku":"OR.2p6x1p9.25.BI.MET.E70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853972811981,"sku":"OR.2p6x1p9.50.BI.MET.E70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853972844749,"sku":"OR.2p6x1p9.100.BI.MET.E70","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-023_5533e522-eefe-4cbc-a0f6-a4073e6a9177.jpg?v=1794355251"},{"product_id":"epdm-metric-o-ring-70a-durometer-4p2mm-id-x-1p9mm-cs","title":"EPDM Metric O-Ring, 70A Durometer, 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") size, molded in 70A EPDM. Its outside diameter is 8mm (0.315\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.2 mm \/ 0.165 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm \/ 0.315 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-65°F to +300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across potable and hot water systems, pool and spa equipment, irrigation, coolant and radiator systems, steam lines and brake systems. If your manual, parts list or old ring calls for 4.2mm ID x 1.9mm CS (0.165\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\u003cp\u003eEPDM is the right choice for water, steam, coolant and outdoor service where nitrile would age and crack. Recommended for hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Not recommended for petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Lubricate EPDM only with silicone-based grease such as \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e; petroleum grease and oil make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 4.2mm ID x 1.9mm CS (0.165\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is EPDM good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Avoid petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853989490893,"sku":"OR.4p2x1p9.25.BI.MET.E70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853989523661,"sku":"OR.4p2x1p9.50.BI.MET.E70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853989556429,"sku":"OR.4p2x1p9.100.BI.MET.E70","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-023_ce647c5e-6873-4d2a-bf23-3f097df08db2.jpg?v=1794355499"},{"product_id":"epdm-metric-o-ring-70a-durometer-5p7mm-id-x-1p9mm-cs","title":"EPDM Metric O-Ring, 70A Durometer, 5.7mm ID x 1.9mm CS (0.224\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 5.7mm ID x 1.9mm CS (0.224\" x 0.075\") size, molded in 70A EPDM. Its outside diameter is 9.5mm (0.374\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5.7 mm \/ 0.224 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9.5 mm \/ 0.374 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-65°F to +300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across potable and hot water systems, pool and spa equipment, irrigation, coolant and radiator systems, steam lines and brake systems. If your manual, parts list or old ring calls for 5.7mm ID x 1.9mm CS (0.224\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\u003cp\u003eEPDM is the right choice for water, steam, coolant and outdoor service where nitrile would age and crack. Recommended for hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Not recommended for petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Lubricate EPDM only with silicone-based grease such as \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e; petroleum grease and oil make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 5.7mm ID x 1.9mm CS (0.224\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is EPDM good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Avoid petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853996437709,"sku":"OR.5p7x1p9.25.BI.MET.E70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853996470477,"sku":"OR.5p7x1p9.50.BI.MET.E70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853996503245,"sku":"OR.5p7x1p9.100.BI.MET.E70","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-023_c79f02d9-d1df-4479-8946-38df3cf1234c.jpg?v=1794355610"},{"product_id":"epdm-metric-o-ring-70a-durometer-8p9mm-id-x-1p9mm-cs","title":"EPDM Metric O-Ring, 70A Durometer, 8.9mm ID x 1.9mm CS (0.350\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 8.9mm ID x 1.9mm CS (0.350\" x 0.075\") size, molded in 70A EPDM. Its outside diameter is 12.7mm (0.500\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8.9 mm \/ 0.350 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12.7 mm \/ 0.500 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-65°F to +300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across potable and hot water systems, pool and spa equipment, irrigation, coolant and radiator systems, steam lines and brake systems. If your manual, parts list or old ring calls for 8.9mm ID x 1.9mm CS (0.350\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\u003cp\u003eEPDM is the right choice for water, steam, coolant and outdoor service where nitrile would age and crack. Recommended for hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Not recommended for petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Lubricate EPDM only with silicone-based grease such as \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e; petroleum grease and oil make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 8.9mm ID x 1.9mm CS (0.350\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is EPDM good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Avoid petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48854012788941,"sku":"OR.8p9x1p9.25.BI.MET.E70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48854012821709,"sku":"OR.8p9x1p9.50.BI.MET.E70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48854012854477,"sku":"OR.8p9x1p9.100.BI.MET.E70","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-023_b1c1a3d0-e398-4f8d-8313-8de51dbfbdf2.jpg?v=1794355840"},{"product_id":"ffkm-perfluoroelastomer-metric-o-ring-75a-durometer-9p8mm-id-x-1p9mm-cs-rated-13f-to-525f","title":"FFKM Perfluoroelastomer Metric O-Ring, 75A Durometer, 9.8mm ID x 1.9mm CS (0.386\" x 0.075\"), Rated -13°F to +525°F","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 9.8mm ID x 1.9mm CS (0.386\" x 0.075\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 13.6mm (0.535\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9.8 mm \/ 0.386 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e13.6 mm \/ 0.535 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N894)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-13°F to +525°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for 9.8mm ID x 1.9mm CS (0.386\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 9.8mm ID x 1.9mm CS (0.386\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48854019834061,"sku":"OR.9p8x1p9.1.BI.MET.FF75","price":92.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48854019866829,"sku":"OR.9p8x1p9.2.BI.MET.FF75","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_30d30787-a78a-4547-b0d2-92280761f054.jpg?v=1794355997"},{"product_id":"ffkm-perfluoroelastomer-metric-o-ring-75a-durometer-9p9mm-id-x-1p9mm-cs-rated-13f-to-525f","title":"FFKM Perfluoroelastomer Metric O-Ring, 75A Durometer, 9.9mm ID x 1.9mm CS (0.390\" x 0.075\"), Rated -13°F to +525°F","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 9.9mm ID x 1.9mm CS (0.390\" x 0.075\") size, molded in 75A FFKM Perfluoroelastomer. Its outside diameter is 13.7mm (0.539\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9.9 mm \/ 0.390 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e13.7 mm \/ 0.539 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFFKM Perfluoroelastomer (N894)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-13°F to +525°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across chemical processing pumps and valves, semiconductor tools, analytical instruments and high-temperature process equipment. If your manual, parts list or old ring calls for 9.9mm ID x 1.9mm CS (0.390\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FFKM Perfluoroelastomer\u003c\/h3\u003e\u003cp\u003eFFKM is the top tier of elastomer sealing, specified where nothing else survives the chemistry or the temperature. Recommended for nearly all chemicals, solvents, acids, bases, steam and extreme heat. Not recommended for molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 9.9mm ID x 1.9mm CS (0.390\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FFKM Perfluoroelastomer good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to nearly all chemicals, solvents, acids, bases, steam and extreme heat. Avoid molten alkali metals and some fluorinated solvents.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48854019899597,"sku":"OR.9p9x1p9.1.BI.MET.FF75","price":92.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48854019932365,"sku":"OR.9p9x1p9.2.BI.MET.FF75","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-027_be53b85b-1815-42c9-9a45-6172205891c2.jpg?v=1794356000"},{"product_id":"fkm-fluorocarbon-metric-o-ring-75a-durometer-8mm-id-x-1p9mm-cs","title":"FKM Fluorocarbon Metric O-Ring, 75A Durometer, 8mm ID x 1.9mm CS (0.315\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 8mm ID x 1.9mm CS (0.315\" x 0.075\") size, molded in 75A FKM Fluorocarbon. Its outside diameter is 11.8mm (0.465\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm \/ 0.315 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11.8 mm \/ 0.465 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 8mm ID x 1.9mm CS (0.315\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 8mm ID x 1.9mm CS (0.315\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48854029959373,"sku":"OR.8x1p9.10.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48854029992141,"sku":"OR.8x1p9.20.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48854030024909,"sku":"OR.8x1p9.25.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-025_f7ae170d-a449-4bb0-92ea-19ad923fab50.jpg?v=1794356159"},{"product_id":"fkm-fluorocarbon-metric-o-ring-90a-durometer-6p8mm-id-x-1p9mm-cs","title":"FKM Fluorocarbon Metric O-Ring, 90A Durometer, 6.8mm ID x 1.9mm CS (0.268\" x 0.075\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 6.8mm ID x 1.9mm CS (0.268\" x 0.075\") size, molded in 90A FKM Fluorocarbon. Its outside diameter is 10.6mm (0.417\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6.8 mm \/ 0.268 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.9 mm \/ 0.075 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10.6 mm \/ 0.417 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 6.8mm ID x 1.9mm CS (0.268\" x 0.075\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003e90A FKM combines fluorocarbon heat and chemical resistance with the extrusion resistance needed in high-pressure hydraulic and fuel systems. Recommended for fuels, oils, aromatic hydrocarbons and many acids at high temperature and pressure. Not recommended for ketones, hot water or steam in continuous service, and phosphate-ester fluids.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 6.8mm ID x 1.9mm CS (0.268\" x 0.075\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels, oils, aromatic hydrocarbons and many acids at high temperature and pressure. Avoid ketones, hot water or steam in continuous service, and phosphate-ester fluids.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48854045360333,"sku":"OR.6p8x1p9.10.BI.MET.V90","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48854045393101,"sku":"OR.6p8x1p9.20.BI.MET.V90","price":28.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48854045425869,"sku":"OR.6p8x1p9.25.BI.MET.V90","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-025_bfa5cd14-540e-4999-ace4-1345f6ddd9db.jpg?v=1794356403"}],"url":"https:\/\/beaverislandparts.com\/collections\/metric-o-rings-1p9mm-cs.oembed?page=2","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}