{"title":"Metric O-Rings, 2.2mm Cross-Section","description":"\u003cp\u003eMetric o-rings with a 2.2mm cross-section, listed by inside diameter and material. Every listing gives the ID and CS in millimetres and inches, the durometer and the temperature range, so you can match your groove or the ring you removed.\u003c\/p\u003e","products":[{"product_id":"m-m12x1p5-p-or-bi-iso6149-b70","title":"ISO 6149 M12x1.5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 9.3mm ID x 2.2mm CS (0.366\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M12x1.5 o-ring, a standard metric sealing size measuring 9.3mm inside diameter by 2.2mm cross-section (0.366\" ID x 0.087\" CS, 13.7mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M12x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 9.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610079113421,"sku":"M.M12x1p5.25.OR.BI.ISO6149.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610079146189,"sku":"M.M12x1p5.50.OR.BI.ISO6149.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610079178957,"sku":"M.M12x1p5.100.OR.BI.ISO6149.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610079211725,"sku":"M.M12x1p5.250.OR.BI.ISO6149.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610079244493,"sku":"M.M12x1p5.500.OR.BI.ISO6149.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-012_2c0f724e-e85e-459b-802b-dd1b13908498.png?v=1785884116"},{"product_id":"m-m12x1p5-p-or-bi-iso6149-b90","title":"ISO 6149 M12x1.5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 9.3mm ID x 2.2mm CS (0.366\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M12x1.5 o-ring, a standard metric sealing size measuring 9.3mm inside diameter by 2.2mm cross-section (0.366\" ID x 0.087\" CS, 13.7mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M12x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 9.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610079277261,"sku":"M.M12x1p5.25.OR.BI.ISO6149.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610079310029,"sku":"M.M12x1p5.50.OR.BI.ISO6149.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610079342797,"sku":"M.M12x1p5.100.OR.BI.ISO6149.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610079375565,"sku":"M.M12x1p5.250.OR.BI.ISO6149.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610079408333,"sku":"M.M12x1p5.500.OR.BI.ISO6149.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-012_5ba04403-2882-4038-ae1c-a019e58e4681.png?v=1785884116"},{"product_id":"m-m12x1p5-p-or-bi-iso6149-v70","title":"ISO 6149 M12x1.5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 9.3mm ID x 2.2mm CS (0.366\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M12x1.5 o-ring, a standard metric sealing size measuring 9.3mm inside diameter by 2.2mm cross-section (0.366\" ID x 0.087\" CS, 13.7mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M12x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 9.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610079441101,"sku":"M.M12x1p5.25.OR.BI.ISO6149.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610079473869,"sku":"M.M12x1p5.50.OR.BI.ISO6149.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610079506637,"sku":"M.M12x1p5.100.OR.BI.ISO6149.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610079539405,"sku":"M.M12x1p5.250.OR.BI.ISO6149.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610079572173,"sku":"M.M12x1p5.500.OR.BI.ISO6149.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/AS568-012_fd2936cc-02c3-4d53-9d83-015dc898f3c6.png?v=1785884117"},{"product_id":"m-m14x1p5-p-or-bi-iso6149-b70","title":"ISO 6149 M14x1.5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 11.3mm ID x 2.2mm CS (0.445\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M14x1.5 o-ring, a standard metric sealing size measuring 11.3mm inside diameter by 2.2mm cross-section (0.445\" ID x 0.087\" CS, 15.7mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M14x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 11.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610079604941,"sku":"M.M14x1p5.25.OR.BI.ISO6149.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610079637709,"sku":"M.M14x1p5.50.OR.BI.ISO6149.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610079670477,"sku":"M.M14x1p5.100.OR.BI.ISO6149.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610079703245,"sku":"M.M14x1p5.250.OR.BI.ISO6149.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610079736013,"sku":"M.M14x1p5.500.OR.BI.ISO6149.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_9402f1f7-9db4-43da-81ab-678ab4e4aa69.jpg?v=1785884117"},{"product_id":"m-m14x1p5-p-or-bi-iso6149-b90","title":"ISO 6149 M14x1.5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 11.3mm ID x 2.2mm CS (0.445\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M14x1.5 o-ring, a standard metric sealing size measuring 11.3mm inside diameter by 2.2mm cross-section (0.445\" ID x 0.087\" CS, 15.7mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M14x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 11.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610079768781,"sku":"M.M14x1p5.25.OR.BI.ISO6149.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610079801549,"sku":"M.M14x1p5.50.OR.BI.ISO6149.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610079834317,"sku":"M.M14x1p5.100.OR.BI.ISO6149.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610079867085,"sku":"M.M14x1p5.250.OR.BI.ISO6149.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610079899853,"sku":"M.M14x1p5.500.OR.BI.ISO6149.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_cdb69b4a-0e7d-4f1c-9663-bf740859ad60.jpg?v=1785884122"},{"product_id":"m-m14x1p5-p-or-bi-iso6149-v70","title":"ISO 6149 M14x1.5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 11.3mm ID x 2.2mm CS (0.445\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M14x1.5 o-ring, a standard metric sealing size measuring 11.3mm inside diameter by 2.2mm cross-section (0.445\" ID x 0.087\" CS, 15.7mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M14x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 11.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610079932621,"sku":"M.M14x1p5.25.OR.BI.ISO6149.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610079965389,"sku":"M.M14x1p5.50.OR.BI.ISO6149.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610079998157,"sku":"M.M14x1p5.100.OR.BI.ISO6149.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610080030925,"sku":"M.M14x1p5.250.OR.BI.ISO6149.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610080063693,"sku":"M.M14x1p5.500.OR.BI.ISO6149.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_bececfca-14b1-4b81-94e6-4d422d214ed9.jpg?v=1785884123"},{"product_id":"m-m16x1p5-p-or-bi-iso6149-b70","title":"ISO 6149 M16x1.5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 13.3mm ID x 2.2mm CS (0.524\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M16x1.5 o-ring, a standard metric sealing size measuring 13.3mm inside diameter by 2.2mm cross-section (0.524\" ID x 0.087\" CS, 17.7mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M16x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 13.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610080096461,"sku":"M.M16x1p5.25.OR.BI.ISO6149.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610080129229,"sku":"M.M16x1p5.50.OR.BI.ISO6149.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610080161997,"sku":"M.M16x1p5.100.OR.BI.ISO6149.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610080194765,"sku":"M.M16x1p5.250.OR.BI.ISO6149.B70","price":66.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610080227533,"sku":"M.M16x1p5.500.OR.BI.ISO6149.B70","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_508bf754-18b5-4e06-a729-009b43ce84c0.jpg?v=1785884124"},{"product_id":"m-m16x1p5-p-or-bi-iso6149-b90","title":"ISO 6149 M16x1.5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 13.3mm ID x 2.2mm CS (0.524\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M16x1.5 o-ring, a standard metric sealing size measuring 13.3mm inside diameter by 2.2mm cross-section (0.524\" ID x 0.087\" CS, 17.7mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M16x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 13.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610080260301,"sku":"M.M16x1p5.25.OR.BI.ISO6149.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610080293069,"sku":"M.M16x1p5.50.OR.BI.ISO6149.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610080325837,"sku":"M.M16x1p5.100.OR.BI.ISO6149.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610080358605,"sku":"M.M16x1p5.250.OR.BI.ISO6149.B90","price":72.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610080391373,"sku":"M.M16x1p5.500.OR.BI.ISO6149.B90","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_6789bd96-8aa4-443d-b641-d76bea994f95.jpg?v=1785884125"},{"product_id":"m-m16x1p5-p-or-bi-iso6149-v70","title":"ISO 6149 M16x1.5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 13.3mm ID x 2.2mm CS (0.524\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M16x1.5 o-ring, a standard metric sealing size measuring 13.3mm inside diameter by 2.2mm cross-section (0.524\" ID x 0.087\" CS, 17.7mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M16x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 13.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48610082029773,"sku":"M.M16x1p5.25.OR.BI.ISO6149.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610082062541,"sku":"M.M16x1p5.50.OR.BI.ISO6149.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610082095309,"sku":"M.M16x1p5.100.OR.BI.ISO6149.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610082128077,"sku":"M.M16x1p5.250.OR.BI.ISO6149.V70","price":138.99,"currency_code":"USD","in_stock":true},{"title":"500-Pack","offer_id":48610082160845,"sku":"M.M16x1p5.500.OR.BI.ISO6149.V70","price":270.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_8803b74e-cd00-410a-8dd8-89087a289acc.jpg?v=1785884130"},{"product_id":"m-m18x1p5-p-or-bi-iso6149-b70","title":"ISO 6149 M18x1.5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 15.3mm ID x 2.2mm CS (0.602\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M18x1.5 o-ring, a standard metric sealing size measuring 15.3mm inside diameter by 2.2mm cross-section (0.602\" ID x 0.087\" CS, 19.7mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M18x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 15.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610082193613,"sku":"M.M18x1p5.10.OR.BI.ISO6149.B70","price":9.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610082226381,"sku":"M.M18x1p5.25.OR.BI.ISO6149.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610082259149,"sku":"M.M18x1p5.50.OR.BI.ISO6149.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610082291917,"sku":"M.M18x1p5.100.OR.BI.ISO6149.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610082324685,"sku":"M.M18x1p5.250.OR.BI.ISO6149.B70","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_044b6661-bc8f-449b-96c1-4804ebf69c95.jpg?v=1785884137"},{"product_id":"m-m18x1p5-p-or-bi-iso6149-b90","title":"ISO 6149 M18x1.5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 15.3mm ID x 2.2mm CS (0.602\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M18x1.5 o-ring, a standard metric sealing size measuring 15.3mm inside diameter by 2.2mm cross-section (0.602\" ID x 0.087\" CS, 19.7mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M18x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 15.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610082357453,"sku":"M.M18x1p5.10.OR.BI.ISO6149.B90","price":10.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610082390221,"sku":"M.M18x1p5.25.OR.BI.ISO6149.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610082422989,"sku":"M.M18x1p5.50.OR.BI.ISO6149.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610082455757,"sku":"M.M18x1p5.100.OR.BI.ISO6149.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610082488525,"sku":"M.M18x1p5.250.OR.BI.ISO6149.B90","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_4c4d7c54-bf11-4949-b5e0-e02d828f689c.jpg?v=1785884131"},{"product_id":"m-m18x1p5-p-or-bi-iso6149-v70","title":"ISO 6149 M18x1.5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 15.3mm ID x 2.2mm CS (0.602\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M18x1.5 o-ring, a standard metric sealing size measuring 15.3mm inside diameter by 2.2mm cross-section (0.602\" ID x 0.087\" CS, 19.7mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M18x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 15.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610082521293,"sku":"M.M18x1p5.10.OR.BI.ISO6149.V70","price":13.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610082554061,"sku":"M.M18x1p5.25.OR.BI.ISO6149.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610082586829,"sku":"M.M18x1p5.50.OR.BI.ISO6149.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610082619597,"sku":"M.M18x1p5.100.OR.BI.ISO6149.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610082652365,"sku":"M.M18x1p5.250.OR.BI.ISO6149.V70","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_50acdadb-ed21-4a23-9c89-21ae030c2116.jpg?v=1785884132"},{"product_id":"m-m20x1p5-p-or-bi-iso6149-b70","title":"ISO 6149 M20x1.5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 17.3mm ID x 2.2mm CS (0.681\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M20x1.5 o-ring, a standard metric sealing size measuring 17.3mm inside diameter by 2.2mm cross-section (0.681\" ID x 0.087\" CS, 21.7mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M20x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 17.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610082685133,"sku":"M.M20x1p5.10.OR.BI.ISO6149.B70","price":9.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610082717901,"sku":"M.M20x1p5.25.OR.BI.ISO6149.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610082750669,"sku":"M.M20x1p5.50.OR.BI.ISO6149.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610082783437,"sku":"M.M20x1p5.100.OR.BI.ISO6149.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610082816205,"sku":"M.M20x1p5.250.OR.BI.ISO6149.B70","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_6bffc5a6-4a86-4c71-832b-beda0c7379ec.jpg?v=1785884137"},{"product_id":"m-m20x1p5-p-or-bi-iso6149-b90","title":"ISO 6149 M20x1.5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 17.3mm ID x 2.2mm CS (0.681\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M20x1.5 o-ring, a standard metric sealing size measuring 17.3mm inside diameter by 2.2mm cross-section (0.681\" ID x 0.087\" CS, 21.7mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M20x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 17.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610082848973,"sku":"M.M20x1p5.10.OR.BI.ISO6149.B90","price":10.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610082881741,"sku":"M.M20x1p5.25.OR.BI.ISO6149.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610082914509,"sku":"M.M20x1p5.50.OR.BI.ISO6149.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610082947277,"sku":"M.M20x1p5.100.OR.BI.ISO6149.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610082980045,"sku":"M.M20x1p5.250.OR.BI.ISO6149.B90","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_1b23fca3-88f8-4bb0-8e08-ac848f9c7c72.jpg?v=1785884138"},{"product_id":"m-m20x1p5-p-or-bi-iso6149-v70","title":"ISO 6149 M20x1.5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 17.3mm ID x 2.2mm CS (0.681\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M20x1.5 o-ring, a standard metric sealing size measuring 17.3mm inside diameter by 2.2mm cross-section (0.681\" ID x 0.087\" CS, 21.7mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M20x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 17.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610083012813,"sku":"M.M20x1p5.10.OR.BI.ISO6149.V70","price":13.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610083045581,"sku":"M.M20x1p5.25.OR.BI.ISO6149.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610083078349,"sku":"M.M20x1p5.50.OR.BI.ISO6149.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610083111117,"sku":"M.M20x1p5.100.OR.BI.ISO6149.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610083143885,"sku":"M.M20x1p5.250.OR.BI.ISO6149.V70","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_c8522fc8-a629-4706-9349-5ce173ee4e1c.jpg?v=1785884139"},{"product_id":"m-m22x1p5-p-or-bi-iso6149-b70","title":"ISO 6149 M22x1.5 Buna-N Nitrile Metric O-Ring, 70A Durometer, 19.3mm ID x 2.2mm CS (0.760\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M22x1.5 o-ring, a standard metric sealing size measuring 19.3mm inside diameter by 2.2mm cross-section (0.760\" ID x 0.087\" CS, 23.7mm outer diameter), molded in 70A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M22x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 19.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610083176653,"sku":"M.M22x1p5.10.OR.BI.ISO6149.B70","price":9.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610083209421,"sku":"M.M22x1p5.25.OR.BI.ISO6149.B70","price":14.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610083242189,"sku":"M.M22x1p5.50.OR.BI.ISO6149.B70","price":20.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610083274957,"sku":"M.M22x1p5.100.OR.BI.ISO6149.B70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610083307725,"sku":"M.M22x1p5.250.OR.BI.ISO6149.B70","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_975f6382-177b-41e9-8009-97c72820596b.jpg?v=1785884144"},{"product_id":"m-m22x1p5-p-or-bi-iso6149-b90","title":"ISO 6149 M22x1.5 Buna-N Nitrile Metric O-Ring, 90A Durometer, 19.3mm ID x 2.2mm CS (0.760\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M22x1.5 o-ring, a standard metric sealing size measuring 19.3mm inside diameter by 2.2mm cross-section (0.760\" ID x 0.087\" CS, 23.7mm outer diameter), molded in 90A Buna-N Nitrile rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M22x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 19.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610083340493,"sku":"M.M22x1p5.10.OR.BI.ISO6149.B90","price":10.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610083373261,"sku":"M.M22x1p5.25.OR.BI.ISO6149.B90","price":15.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610083406029,"sku":"M.M22x1p5.50.OR.BI.ISO6149.B90","price":21.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610083438797,"sku":"M.M22x1p5.100.OR.BI.ISO6149.B90","price":32.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610083471565,"sku":"M.M22x1p5.250.OR.BI.ISO6149.B90","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_9e4e5d5d-ee9c-4f32-adf3-56eea4c05d02.jpg?v=1785884144"},{"product_id":"m-m22x1p5-p-or-bi-iso6149-v70","title":"ISO 6149 M22x1.5 FKM Fluorocarbon Metric O-Ring, 75A Durometer, 19.3mm ID x 2.2mm CS (0.760\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR INSIDE DIAMETER, CROSS-SECTION AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery dimension, material and durometer for this o-ring is published above. Because these are standard catalogue sizes chosen by measurement rather than by pump model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge - that never changes.\u003c\/p\u003e\n\u003cp\u003eChasing a leak or a slow drip and need the exact metric o-ring size to seal it for good? A worn or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the equipment around it.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThis Beaver Island Parts Company replacement o-ring is a single ISO 6149 M22x1.5 o-ring, a standard metric sealing size measuring 19.3mm inside diameter by 2.2mm cross-section (0.760\" ID x 0.087\" CS, 23.7mm outer diameter), molded in 75A Fluorocarbon (FKM) rubber.\u003c\/p\u003e\u003cbr\u003e\u003cb\u003eFull Compatibility:\u003c\/b\u003e ISO 6149 M22x1.5 is an international-standard o-ring size used across pumps, valves, filters, fittings and machinery worldwide. If your application calls for a 19.3mm x 2.2mm o-ring, this is the size.\u003cbr\u003e\u003cb\u003eInstallation Note:\u003c\/b\u003e Clean the groove, inspect the sealing surface, seat the new o-ring without twisting it, and lubricate before assembly.\u003cbr\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Apply \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e lubricant before installation to ease seating and extend seal life.\u003cbr\u003e\u003cp\u003eWe are an American family-owned and operated small business committed to high-quality replacement parts and honest fitment information.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48610083504333,"sku":"M.M22x1p5.10.OR.BI.ISO6149.V70","price":13.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48610083537101,"sku":"M.M22x1p5.25.OR.BI.ISO6149.V70","price":24.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48610083569869,"sku":"M.M22x1p5.50.OR.BI.ISO6149.V70","price":37.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48610083602637,"sku":"M.M22x1p5.100.OR.BI.ISO6149.V70","price":59.99,"currency_code":"USD","in_stock":true},{"title":"250-Pack","offer_id":48610083635405,"sku":"M.M22x1p5.250.OR.BI.ISO6149.V70","price":138.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/51SZ57OhF_L._SL1500_c58828fe-5ed6-4e88-b047-b667086b4a04.jpg?v=1785884146"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-10mm-id-x-2p2mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 10mm ID x 2.2mm CS (0.394\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 10mm ID x 2.2mm CS (0.394\" x 0.087\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 14.4mm (0.567\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10 mm \/ 0.394 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14.4 mm \/ 0.567 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 10mm ID x 2.2mm CS (0.394\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 10mm ID x 2.2mm CS (0.394\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"5-Pack","offer_id":48853587034317,"sku":"OR.10x2p2.5.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853587067085,"sku":"OR.10x2p2.10.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853587099853,"sku":"OR.10x2p2.20.BI.MET.V70","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_41cac396-89cb-47d5-9ddd-bb5d81ac4e59.jpg?v=1794349906"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-20mm-id-x-2p2mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 20mm ID x 2.2mm CS (0.787\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 20mm ID x 2.2mm CS (0.787\" x 0.087\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 24.4mm (0.961\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e20 mm \/ 0.787 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e24.4 mm \/ 0.961 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 20mm ID x 2.2mm CS (0.787\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 20mm ID x 2.2mm CS (0.787\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"3-Pack","offer_id":48853612757197,"sku":"OR.20x2p2.3.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853612789965,"sku":"OR.20x2p2.5.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853612822733,"sku":"OR.20x2p2.10.BI.MET.V70","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_d032bd20-726d-4d20-b3cb-d3f3ee043e6d.jpg?v=1794350269"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-6mm-id-x-2p2mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 6mm ID x 2.2mm CS (0.236\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 6mm ID x 2.2mm CS (0.236\" x 0.087\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 10.4mm (0.409\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6 mm \/ 0.236 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10.4 mm \/ 0.409 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 6mm ID x 2.2mm CS (0.236\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 6mm ID x 2.2mm CS (0.236\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853665775821,"sku":"OR.6x2p2.10.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853665808589,"sku":"OR.6x2p2.20.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853665841357,"sku":"OR.6x2p2.25.BI.MET.V70","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_d740c043-5ebf-4017-9f84-50ae8ff9c019.jpg?v=1794351012"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-90a-durometer-15p3mm-id-x-2p2mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 90A Durometer, 15.3mm ID x 2.2mm CS (0.602\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 15.3mm ID x 2.2mm CS (0.602\" x 0.087\") size, molded in 90A Brown FKM Fluorocarbon. Its outside diameter is 19.7mm (0.776\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e15.3 mm \/ 0.602 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e19.7 mm \/ 0.776 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 15.3mm ID x 2.2mm CS (0.602\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003e90A FKM combines fluorocarbon heat and chemical resistance with the extrusion resistance needed in high-pressure hydraulic and fuel systems. Recommended for fuels, oils, aromatic hydrocarbons and many acids at high temperature and pressure. Not recommended for ketones, hot water or steam in continuous service, and phosphate-ester fluids.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 15.3mm ID x 2.2mm CS (0.602\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels, oils, aromatic hydrocarbons and many acids at high temperature and pressure. Avoid ketones, hot water or steam in continuous service, and phosphate-ester fluids.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"3-Pack","offer_id":48853684519117,"sku":"OR.15p3x2p2.3.BI.MET.V90","price":26.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853684551885,"sku":"OR.15p3x2p2.5.BI.MET.V90","price":27.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853684584653,"sku":"OR.15p3x2p2.10.BI.MET.V90","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_bee43329-4759-4488-a409-41d5009b86e7.jpg?v=1794351281"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-10mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 10mm ID x 2.2mm CS (0.394\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 10mm ID x 2.2mm CS (0.394\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 14.4mm (0.567\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10 mm \/ 0.394 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14.4 mm \/ 0.567 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 10mm ID x 2.2mm CS (0.394\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 10mm ID x 2.2mm CS (0.394\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853691662541,"sku":"OR.10x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853691695309,"sku":"OR.10x2p2.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853691728077,"sku":"OR.10x2p2.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_44f199e7-558f-43f0-a540-ead44b7d8e0f.jpg?v=1794351373"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-11mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 11mm ID x 2.2mm CS (0.433\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 11mm ID x 2.2mm CS (0.433\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 15.4mm (0.606\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11 mm \/ 0.433 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e15.4 mm \/ 0.606 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 11mm ID x 2.2mm CS (0.433\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 11mm ID x 2.2mm CS (0.433\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853698773197,"sku":"OR.11x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853698805965,"sku":"OR.11x2p2.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853698838733,"sku":"OR.11x2p2.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_fb85d36d-5d64-4d55-9f4f-3a7c4ed45f58.jpg?v=1794351472"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-11p2mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 11.2mm ID x 2.2mm CS (0.441\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 11.2mm ID x 2.2mm CS (0.441\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 15.6mm (0.614\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11.2 mm \/ 0.441 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e15.6 mm \/ 0.614 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 11.2mm ID x 2.2mm CS (0.441\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 11.2mm ID x 2.2mm CS (0.441\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853699657933,"sku":"OR.11p2x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853699690701,"sku":"OR.11p2x2p2.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853699723469,"sku":"OR.11p2x2p2.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_b7a43c4d-c2f5-4934-8662-205ae9595d71.jpg?v=1794351484"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-12mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 12mm ID x 2.2mm CS (0.472\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 12mm ID x 2.2mm CS (0.472\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 16.4mm (0.646\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12 mm \/ 0.472 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e16.4 mm \/ 0.646 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 12mm ID x 2.2mm CS (0.472\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 12mm ID x 2.2mm CS (0.472\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853705785549,"sku":"OR.12x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853705818317,"sku":"OR.12x2p2.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853705851085,"sku":"OR.12x2p2.100.BI.MET.B70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_59727cd3-e7f0-4eef-8962-42f1e40c4e26.jpg?v=1794351567"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-16mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 16mm ID x 2.2mm CS (0.630\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 16mm ID x 2.2mm CS (0.630\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 20.4mm (0.803\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e16 mm \/ 0.630 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e20.4 mm \/ 0.803 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 16mm ID x 2.2mm CS (0.630\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 16mm ID x 2.2mm CS (0.630\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853729083597,"sku":"OR.16x2p2.10.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853729116365,"sku":"OR.16x2p2.20.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853729149133,"sku":"OR.16x2p2.25.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_3be9ddd0-f16d-4f63-8d2d-a5ea4c036bc3.jpg?v=1794351892"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-18mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 18mm ID x 2.2mm CS (0.709\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 18mm ID x 2.2mm CS (0.709\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 22.4mm (0.882\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e18 mm \/ 0.709 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22.4 mm \/ 0.882 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 18mm ID x 2.2mm CS (0.709\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 18mm ID x 2.2mm CS (0.709\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"20-Pack","offer_id":48853738750157,"sku":"OR.18x2p2.20.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853738782925,"sku":"OR.18x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853738815693,"sku":"OR.18x2p2.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_313eb0e5-0d89-49a7-9a80-c4179e8f85fc.jpg?v=1794352031"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-19mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 19mm ID x 2.2mm CS (0.748\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 19mm ID x 2.2mm CS (0.748\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 23.4mm (0.921\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e19 mm \/ 0.748 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e23.4 mm \/ 0.921 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 19mm ID x 2.2mm CS (0.748\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 19mm ID x 2.2mm CS (0.748\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"20-Pack","offer_id":48853742747853,"sku":"OR.19x2p2.20.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853742780621,"sku":"OR.19x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853742813389,"sku":"OR.19x2p2.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_1e62eb29-523c-45e3-8b5b-71dff98362e6.jpg?v=1794352087"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-20mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 20mm ID x 2.2mm CS (0.787\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 20mm ID x 2.2mm CS (0.787\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 24.4mm (0.961\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e20 mm \/ 0.787 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e24.4 mm \/ 0.961 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 20mm ID x 2.2mm CS (0.787\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 20mm ID x 2.2mm CS (0.787\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"15-Pack","offer_id":48853748416717,"sku":"OR.20x2p2.15.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853748449485,"sku":"OR.20x2p2.20.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853748482253,"sku":"OR.20x2p2.25.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_e47b906f-63f8-4d05-80fd-73d8ac14fd04.jpg?v=1794352165"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-28mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 28mm ID x 2.2mm CS (1.102\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 28mm ID x 2.2mm CS (1.102\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 32.4mm (1.276\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28 mm \/ 1.102 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e32.4 mm \/ 1.276 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 28mm ID x 2.2mm CS (1.102\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 28mm ID x 2.2mm CS (1.102\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853771583693,"sku":"OR.28x2p2.10.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853771616461,"sku":"OR.28x2p2.20.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853771649229,"sku":"OR.28x2p2.25.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_69761f1c-667a-4342-959e-8deb5ec9ca20.jpg?v=1794352493"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-32mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 32mm ID x 2.2mm CS (1.260\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 32mm ID x 2.2mm CS (1.260\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 36.4mm (1.433\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e32 mm \/ 1.260 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e36.4 mm \/ 1.433 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 32mm ID x 2.2mm CS (1.260\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 32mm ID x 2.2mm CS (1.260\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853784625357,"sku":"OR.32x2p2.10.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853784658125,"sku":"OR.32x2p2.20.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853784690893,"sku":"OR.32x2p2.25.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_ef76965c-93f2-4dd3-89a0-b17ce0e25b91.jpg?v=1794352669"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-33p7mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 33.7mm ID x 2.2mm CS (1.327\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 33.7mm ID x 2.2mm CS (1.327\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 38.1mm (1.500\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e33.7 mm \/ 1.327 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e38.1 mm \/ 1.500 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 33.7mm ID x 2.2mm CS (1.327\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 33.7mm ID x 2.2mm CS (1.327\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853787508941,"sku":"OR.33p7x2p2.10.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853787541709,"sku":"OR.33p7x2p2.20.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853787574477,"sku":"OR.33p7x2p2.25.BI.MET.B70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_14b8668f-88e0-43d1-a8ee-4126eb39f699.jpg?v=1794352709"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-4mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 4mm ID x 2.2mm CS (0.157\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 4mm ID x 2.2mm CS (0.157\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 8.4mm (0.331\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4 mm \/ 0.157 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8.4 mm \/ 0.331 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 4mm ID x 2.2mm CS (0.157\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 4mm ID x 2.2mm CS (0.157\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853816180941,"sku":"OR.4x2p2.25.BI.MET.B70","price":25.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853816213709,"sku":"OR.4x2p2.50.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853816246477,"sku":"OR.4x2p2.100.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_a568b780-362f-4742-9521-58c160f44068.jpg?v=1794353110"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-55mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 55mm ID x 2.2mm CS (2.165\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 55mm ID x 2.2mm CS (2.165\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 59.4mm (2.339\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e55 mm \/ 2.165 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e59.4 mm \/ 2.339 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 55mm ID x 2.2mm CS (2.165\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 55mm ID x 2.2mm CS (2.165\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"5-Pack","offer_id":48853823914189,"sku":"OR.55x2p2.5.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853823946957,"sku":"OR.55x2p2.10.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853823979725,"sku":"OR.55x2p2.20.BI.MET.B70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_0399711c-9300-4444-ace9-b1f255cf4eb7.jpg?v=1794353219"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-6mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 6mm ID x 2.2mm CS (0.236\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 6mm ID x 2.2mm CS (0.236\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 10.4mm (0.409\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6 mm \/ 0.236 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10.4 mm \/ 0.409 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 6mm ID x 2.2mm CS (0.236\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 6mm ID x 2.2mm CS (0.236\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853840789709,"sku":"OR.6x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853840822477,"sku":"OR.6x2p2.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853840855245,"sku":"OR.6x2p2.100.BI.MET.B70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_10fce278-087c-4c48-bd50-89163a0c5e6d.jpg?v=1794353461"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-7mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 7mm ID x 2.2mm CS (0.276\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 7mm ID x 2.2mm CS (0.276\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 11.4mm (0.449\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7 mm \/ 0.276 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11.4 mm \/ 0.449 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 7mm ID x 2.2mm CS (0.276\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 7mm ID x 2.2mm CS (0.276\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"20-Pack","offer_id":48853850718413,"sku":"OR.7x2p2.20.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853850751181,"sku":"OR.7x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853850783949,"sku":"OR.7x2p2.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_dabe65d7-d027-4400-8aa5-35650bef5a1d.jpg?v=1794353607"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-7p3mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 7.3mm ID x 2.2mm CS (0.287\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 7.3mm ID x 2.2mm CS (0.287\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 11.7mm (0.461\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.3 mm \/ 0.287 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11.7 mm \/ 0.461 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 7.3mm ID x 2.2mm CS (0.287\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 7.3mm ID x 2.2mm CS (0.287\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853851275469,"sku":"OR.7p3x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853851308237,"sku":"OR.7p3x2p2.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853851341005,"sku":"OR.7p3x2p2.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_3e15f31c-0228-4165-85f5-daba93d7e891.jpg?v=1794353615"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-7p5mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 7.5mm ID x 2.2mm CS (0.295\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 7.5mm ID x 2.2mm CS (0.295\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 11.9mm (0.469\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e7.5 mm \/ 0.295 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e11.9 mm \/ 0.469 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 7.5mm ID x 2.2mm CS (0.295\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 7.5mm ID x 2.2mm CS (0.295\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853852324045,"sku":"OR.7p5x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853852356813,"sku":"OR.7p5x2p2.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853852389581,"sku":"OR.7p5x2p2.100.BI.MET.B70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_352fda11-925c-476c-80dc-ea2ca9f21bd6.jpg?v=1794353634"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-88mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 88mm ID x 2.2mm CS (3.465\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 88mm ID x 2.2mm CS (3.465\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 92.4mm (3.638\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e88 mm \/ 3.465 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e92.4 mm \/ 3.638 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 88mm ID x 2.2mm CS (3.465\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 88mm ID x 2.2mm CS (3.465\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"2-Pack","offer_id":48853859860685,"sku":"OR.88x2p2.2.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853859893453,"sku":"OR.88x2p2.3.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853859926221,"sku":"OR.88x2p2.5.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_aef44777-ce4b-437f-ae4c-0cfb467b9212.jpg?v=1794353737"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-8mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 8mm ID x 2.2mm CS (0.315\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 8mm ID x 2.2mm CS (0.315\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 12.4mm (0.488\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm \/ 0.315 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12.4 mm \/ 0.488 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 8mm ID x 2.2mm CS (0.315\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 8mm ID x 2.2mm CS (0.315\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"20-Pack","offer_id":48853861761229,"sku":"OR.8x2p2.20.BI.MET.B70","price":25.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853861793997,"sku":"OR.8x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853861826765,"sku":"OR.8x2p2.50.BI.MET.B70","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_9a15ac98-7d47-474f-a83e-394036520575.jpg?v=1794353763"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-9mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 9mm ID x 2.2mm CS (0.354\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 9mm ID x 2.2mm CS (0.354\" x 0.087\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 13.4mm (0.528\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9 mm \/ 0.354 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e13.4 mm \/ 0.528 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 9mm ID x 2.2mm CS (0.354\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 9mm ID x 2.2mm CS (0.354\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853870477517,"sku":"OR.9x2p2.25.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853870510285,"sku":"OR.9x2p2.50.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853870543053,"sku":"OR.9x2p2.100.BI.MET.B70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_7e495d50-098a-4bbb-8ade-b3c0f013b8b9.jpg?v=1794353887"},{"product_id":"buna-n-nitrile-metric-o-ring-90a-durometer-10mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 90A Durometer, 10mm ID x 2.2mm CS (0.394\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 10mm ID x 2.2mm CS (0.394\" x 0.087\") size, molded in 90A Buna-N Nitrile. Its outside diameter is 14.4mm (0.567\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10 mm \/ 0.394 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14.4 mm \/ 0.567 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across high-pressure hydraulic fittings, valves, pumps and cylinders. If your manual, parts list or old ring calls for 10mm ID x 2.2mm CS (0.394\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eThe harder 90A compound resists extrusion and nibbling in high-pressure hydraulic joints, which is why it is the standard for straight-thread port fittings. Recommended for hydraulic oil, petroleum fluids, water and air at elevated pressure. Not recommended for brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 10mm ID x 2.2mm CS (0.394\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hydraulic oil, petroleum fluids, water and air at elevated pressure. Avoid brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853873787085,"sku":"OR.10x2p2.25.BI.MET.B90","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853873819853,"sku":"OR.10x2p2.50.BI.MET.B90","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853873852621,"sku":"OR.10x2p2.100.BI.MET.B90","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_d0189261-f756-40d8-a8ea-fa8d5b4b477c.jpg?v=1794353933"},{"product_id":"buna-n-nitrile-metric-o-ring-90a-durometer-18mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 90A Durometer, 18mm ID x 2.2mm CS (0.709\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 18mm ID x 2.2mm CS (0.709\" x 0.087\") size, molded in 90A Buna-N Nitrile. Its outside diameter is 22.4mm (0.882\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e18 mm \/ 0.709 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22.4 mm \/ 0.882 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across high-pressure hydraulic fittings, valves, pumps and cylinders. If your manual, parts list or old ring calls for 18mm ID x 2.2mm CS (0.709\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eThe harder 90A compound resists extrusion and nibbling in high-pressure hydraulic joints, which is why it is the standard for straight-thread port fittings. Recommended for hydraulic oil, petroleum fluids, water and air at elevated pressure. Not recommended for brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 18mm ID x 2.2mm CS (0.709\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hydraulic oil, petroleum fluids, water and air at elevated pressure. Avoid brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853885354189,"sku":"OR.18x2p2.25.BI.MET.B90","price":27.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853885386957,"sku":"OR.18x2p2.50.BI.MET.B90","price":31.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853885419725,"sku":"OR.18x2p2.100.BI.MET.B90","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_cf6ae85e-699e-4ae3-aa5e-25223773ff75.jpg?v=1794354089"},{"product_id":"buna-n-nitrile-metric-o-ring-90a-durometer-6mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 90A Durometer, 6mm ID x 2.2mm CS (0.236\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 6mm ID x 2.2mm CS (0.236\" x 0.087\") size, molded in 90A Buna-N Nitrile. Its outside diameter is 10.4mm (0.409\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6 mm \/ 0.236 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10.4 mm \/ 0.409 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across high-pressure hydraulic fittings, valves, pumps and cylinders. If your manual, parts list or old ring calls for 6mm ID x 2.2mm CS (0.236\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eThe harder 90A compound resists extrusion and nibbling in high-pressure hydraulic joints, which is why it is the standard for straight-thread port fittings. Recommended for hydraulic oil, petroleum fluids, water and air at elevated pressure. Not recommended for brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 6mm ID x 2.2mm CS (0.236\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hydraulic oil, petroleum fluids, water and air at elevated pressure. Avoid brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853929132237,"sku":"OR.6x2p2.25.BI.MET.B90","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853929165005,"sku":"OR.6x2p2.50.BI.MET.B90","price":27.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853929197773,"sku":"OR.6x2p2.100.BI.MET.B90","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_41510bf2-35a0-4b7a-a873-e5af504481ac.jpg?v=1794354617"},{"product_id":"buna-n-nitrile-metric-o-ring-90a-durometer-8mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 90A Durometer, 8mm ID x 2.2mm CS (0.315\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 8mm ID x 2.2mm CS (0.315\" x 0.087\") size, molded in 90A Buna-N Nitrile. Its outside diameter is 12.4mm (0.488\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e8 mm \/ 0.315 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12.4 mm \/ 0.488 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across high-pressure hydraulic fittings, valves, pumps and cylinders. If your manual, parts list or old ring calls for 8mm ID x 2.2mm CS (0.315\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eThe harder 90A compound resists extrusion and nibbling in high-pressure hydraulic joints, which is why it is the standard for straight-thread port fittings. Recommended for hydraulic oil, petroleum fluids, water and air at elevated pressure. Not recommended for brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 8mm ID x 2.2mm CS (0.315\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hydraulic oil, petroleum fluids, water and air at elevated pressure. Avoid brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853937094861,"sku":"OR.8x2p2.25.BI.MET.B90","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853937127629,"sku":"OR.8x2p2.50.BI.MET.B90","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853937160397,"sku":"OR.8x2p2.100.BI.MET.B90","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_2e2b8d46-7817-4f51-be8b-d1140b4ad694.jpg?v=1794354717"},{"product_id":"buna-n-nitrile-metric-o-ring-90a-durometer-9mm-id-x-2p2mm-cs","title":"Buna-N Nitrile Metric O-Ring, 90A Durometer, 9mm ID x 2.2mm CS (0.354\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 9mm ID x 2.2mm CS (0.354\" x 0.087\") size, molded in 90A Buna-N Nitrile. Its outside diameter is 13.4mm (0.528\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e9 mm \/ 0.354 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e13.4 mm \/ 0.528 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e90A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across high-pressure hydraulic fittings, valves, pumps and cylinders. If your manual, parts list or old ring calls for 9mm ID x 2.2mm CS (0.354\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eThe harder 90A compound resists extrusion and nibbling in high-pressure hydraulic joints, which is why it is the standard for straight-thread port fittings. Recommended for hydraulic oil, petroleum fluids, water and air at elevated pressure. Not recommended for brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 9mm ID x 2.2mm CS (0.354\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hydraulic oil, petroleum fluids, water and air at elevated pressure. Avoid brake fluid (glycol), ketones, and long-term ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"25-Pack","offer_id":48853940240589,"sku":"OR.9x2p2.25.BI.MET.B90","price":26.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853940273357,"sku":"OR.9x2p2.50.BI.MET.B90","price":28.99,"currency_code":"USD","in_stock":true},{"title":"100-Pack","offer_id":48853940306125,"sku":"OR.9x2p2.100.BI.MET.B90","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_b54d1fce-deb0-4ee2-94b6-608501f40e2b.jpg?v=1794354761"},{"product_id":"epdm-metric-o-ring-70a-durometer-16p4mm-id-x-2p2mm-cs","title":"EPDM Metric O-Ring, 70A Durometer, 16.4mm ID x 2.2mm CS (0.646\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 16.4mm ID x 2.2mm CS (0.646\" x 0.087\") size, molded in 70A EPDM. Its outside diameter is 20.8mm (0.819\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e16.4 mm \/ 0.646 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e20.8 mm \/ 0.819 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-65°F to +300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across potable and hot water systems, pool and spa equipment, irrigation, coolant and radiator systems, steam lines and brake systems. If your manual, parts list or old ring calls for 16.4mm ID x 2.2mm CS (0.646\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\u003cp\u003eEPDM is the right choice for water, steam, coolant and outdoor service where nitrile would age and crack. Recommended for hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Not recommended for petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Lubricate EPDM only with silicone-based grease such as \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e; petroleum grease and oil make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 16.4mm ID x 2.2mm CS (0.646\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is EPDM good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Avoid petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"15-Pack","offer_id":48853957279949,"sku":"OR.16p4x2p2.15.BI.MET.E70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853957312717,"sku":"OR.16p4x2p2.20.BI.MET.E70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853957345485,"sku":"OR.16p4x2p2.25.BI.MET.E70","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-023_1cdc4643-ed4b-4240-b11e-b61f5506aa90.jpg?v=1794355008"},{"product_id":"epdm-metric-o-ring-70a-durometer-40mm-id-x-2p2mm-cs","title":"EPDM Metric O-Ring, 70A Durometer, 40mm ID x 2.2mm CS (1.575\" x 0.087\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 40mm ID x 2.2mm CS (1.575\" x 0.087\") size, molded in 70A EPDM. Its outside diameter is 44.4mm (1.748\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm \/ 1.575 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 mm \/ 0.087 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e44.4 mm \/ 1.748 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eEPDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-65°F to +300°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across potable and hot water systems, pool and spa equipment, irrigation, coolant and radiator systems, steam lines and brake systems. If your manual, parts list or old ring calls for 40mm ID x 2.2mm CS (1.575\" x 0.087\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy EPDM\u003c\/h3\u003e\u003cp\u003eEPDM is the right choice for water, steam, coolant and outdoor service where nitrile would age and crack. Recommended for hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Not recommended for petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Lubricate EPDM only with silicone-based grease such as \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e; petroleum grease and oil make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 40mm ID x 2.2mm CS (1.575\" x 0.087\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is EPDM good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to hot and cold water, steam, glycol coolants, DOT 3\/4\/5.1 brake fluid, ozone and weathering. Avoid petroleum oils, fuels and hydraulic oil, which make EPDM swell.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"5-Pack","offer_id":48853982478541,"sku":"OR.40x2p2.5.BI.MET.E70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853982511309,"sku":"OR.40x2p2.10.BI.MET.E70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853982544077,"sku":"OR.40x2p2.20.BI.MET.E70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-023_97909191-830f-4545-bf81-d2b560230a99.jpg?v=1794355397"}],"url":"https:\/\/beaverislandparts.com\/collections\/metric-o-rings-2p2mm-cs.oembed?page=2","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}