{"title":"Metric O-Rings, 3.6mm Cross-Section","description":"\u003cp\u003eMetric o-rings with a 3.6mm cross-section, listed by inside diameter and material. Every listing gives the ID and CS in millimetres and inches, the durometer and the temperature range, so you can match your groove or the ring you removed.\u003c\/p\u003e","products":[{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-19p8mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 19.8mm ID x 3.6mm CS (0.780\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 19.8mm ID x 3.6mm CS (0.780\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 27mm (1.063\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e19.8 mm \/ 0.780 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e27 mm \/ 1.063 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 19.8mm ID x 3.6mm CS (0.780\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 19.8mm ID x 3.6mm CS (0.780\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"3-Pack","offer_id":48853611020493,"sku":"OR.19p8x3p6.3.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853611053261,"sku":"OR.19p8x3p6.5.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853611086029,"sku":"OR.19p8x3p6.10.BI.MET.V70","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_63703a13-1cee-4879-a43d-8be7644d8e59.jpg?v=1794350244"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-21p3mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 21.3mm ID x 3.6mm CS (0.839\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 21.3mm ID x 3.6mm CS (0.839\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 28.5mm (1.122\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e21.3 mm \/ 0.839 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28.5 mm \/ 1.122 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 21.3mm ID x 3.6mm CS (0.839\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 21.3mm ID x 3.6mm CS (0.839\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"3-Pack","offer_id":48853615706317,"sku":"OR.21p3x3p6.3.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853615739085,"sku":"OR.21p3x3p6.5.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853615771853,"sku":"OR.21p3x3p6.10.BI.MET.V70","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_d81cd89c-fe1c-4d55-9643-71abb80f175c.jpg?v=1794350309"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-23mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 23mm ID x 3.6mm CS (0.906\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 23mm ID x 3.6mm CS (0.906\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 30.2mm (1.189\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e23 mm \/ 0.906 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30.2 mm \/ 1.189 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 23mm ID x 3.6mm CS (0.906\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 23mm ID x 3.6mm CS (0.906\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"3-Pack","offer_id":48853618360525,"sku":"OR.23x3p6.3.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853618393293,"sku":"OR.23x3p6.5.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853618426061,"sku":"OR.23x3p6.10.BI.MET.V70","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_d5ba73ee-e513-41e9-96a6-74f288e07f39.jpg?v=1794350346"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-24p6mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 24.6mm ID x 3.6mm CS (0.969\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 24.6mm ID x 3.6mm CS (0.969\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 31.8mm (1.252\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e24.6 mm \/ 0.969 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e31.8 mm \/ 1.252 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 24.6mm ID x 3.6mm CS (0.969\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 24.6mm ID x 3.6mm CS (0.969\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"3-Pack","offer_id":48853620588749,"sku":"OR.24p6x3p6.3.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853620621517,"sku":"OR.24p6x3p6.5.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48853620654285,"sku":"OR.24p6x3p6.10.BI.MET.V70","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_6207edfb-0e30-44de-9f70-559543e11e84.jpg?v=1794350383"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-26p2mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 26.2mm ID x 3.6mm CS (1.031\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 26.2mm ID x 3.6mm CS (1.031\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 33.4mm (1.315\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e26.2 mm \/ 1.031 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e33.4 mm \/ 1.315 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 26.2mm ID x 3.6mm CS (1.031\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 26.2mm ID x 3.6mm CS (1.031\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"2-Pack","offer_id":48853623931085,"sku":"OR.26p2x3p6.2.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853623963853,"sku":"OR.26p2x3p6.3.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":48853623996621,"sku":"OR.26p2x3p6.5.BI.MET.V70","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_106d1829-1bf9-4f5d-8189-cff2f4a964e5.jpg?v=1794350436"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-29p3mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 29.3mm ID x 3.6mm CS (1.154\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 29.3mm ID x 3.6mm CS (1.154\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 36.5mm (1.437\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e29.3 mm \/ 1.154 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e36.5 mm \/ 1.437 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 29.3mm ID x 3.6mm CS (1.154\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 29.3mm ID x 3.6mm CS (1.154\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853628125389,"sku":"OR.29p3x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853628158157,"sku":"OR.29p3x3p6.2.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853628190925,"sku":"OR.29p3x3p6.3.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_d571538c-d638-4edd-bfc3-ea44743dcddf.jpg?v=1794350495"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-30p8mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 30.8mm ID x 3.6mm CS (1.213\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 30.8mm ID x 3.6mm CS (1.213\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 38mm (1.496\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30.8 mm \/ 1.213 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e38 mm \/ 1.496 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 30.8mm ID x 3.6mm CS (1.213\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 30.8mm ID x 3.6mm CS (1.213\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853630910669,"sku":"OR.30p8x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853630943437,"sku":"OR.30p8x3p6.2.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853630976205,"sku":"OR.30p8x3p6.3.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_daaae720-d856-4f50-ba2a-7d6ff7914f6c.jpg?v=1794350530"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-32p5mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 32.5mm ID x 3.6mm CS (1.280\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 32.5mm ID x 3.6mm CS (1.280\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 39.7mm (1.563\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e32.5 mm \/ 1.280 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e39.7 mm \/ 1.563 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 32.5mm ID x 3.6mm CS (1.280\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 32.5mm ID x 3.6mm CS (1.280\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853633663181,"sku":"OR.32p5x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853633695949,"sku":"OR.32p5x3p6.2.BI.MET.V70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853633728717,"sku":"OR.32p5x3p6.3.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_4668a315-0a41-4bed-9701-2e4565d13c64.jpg?v=1794350570"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-34p1mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 34.1mm ID x 3.6mm CS (1.343\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 34.1mm ID x 3.6mm CS (1.343\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 41.3mm (1.626\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e34.1 mm \/ 1.343 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e41.3 mm \/ 1.626 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 34.1mm ID x 3.6mm CS (1.343\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 34.1mm ID x 3.6mm CS (1.343\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853635170509,"sku":"OR.34p1x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853635203277,"sku":"OR.34p1x3p6.2.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853635236045,"sku":"OR.34p1x3p6.3.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_805fd1dd-b2cb-4735-acb6-13e2348c45b1.jpg?v=1794350591"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-35p6mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 35.6mm ID x 3.6mm CS (1.402\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 35.6mm ID x 3.6mm CS (1.402\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 42.8mm (1.685\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e35.6 mm \/ 1.402 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e42.8 mm \/ 1.685 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 35.6mm ID x 3.6mm CS (1.402\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 35.6mm ID x 3.6mm CS (1.402\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853636284621,"sku":"OR.35p6x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853636317389,"sku":"OR.35p6x3p6.2.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853636350157,"sku":"OR.35p6x3p6.3.BI.MET.V70","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_b2037c2c-8b84-430f-854e-1891f5bc7dc2.jpg?v=1794350606"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-37p3mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 37.3mm ID x 3.6mm CS (1.469\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 37.3mm ID x 3.6mm CS (1.469\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 44.5mm (1.752\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e37.3 mm \/ 1.469 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e44.5 mm \/ 1.752 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 37.3mm ID x 3.6mm CS (1.469\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 37.3mm ID x 3.6mm CS (1.469\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853638414541,"sku":"OR.37p3x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853638447309,"sku":"OR.37p3x3p6.2.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853638480077,"sku":"OR.37p3x3p6.3.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_36a85344-d6db-4a20-9a9d-abaa4022ba43.jpg?v=1794350636"},{"product_id":"brown-fkm-fluorocarbon-metric-o-ring-75a-durometer-43p4mm-id-x-3p6mm-cs","title":"Brown FKM Fluorocarbon Metric O-Ring, 75A Durometer, 43.4mm ID x 3.6mm CS (1.709\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 43.4mm ID x 3.6mm CS (1.709\" x 0.142\") size, molded in 75A Brown FKM Fluorocarbon. Its outside diameter is 50.6mm (1.992\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e43.4 mm \/ 1.709 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50.6 mm \/ 1.992 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFKM Fluorocarbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-20°F to +400°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across fuel systems, engines, transmissions, chemical pumps, valves, carburetors and injectors, and high-temperature hydraulic or process equipment. If your manual, parts list or old ring calls for 43.4mm ID x 3.6mm CS (1.709\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy FKM Fluorocarbon\u003c\/h3\u003e\u003cp\u003eFKM holds its seal where nitrile hardens and cracks: high heat, fuel, and aggressive chemicals. Recommended for fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Not recommended for ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 43.4mm ID x 3.6mm CS (1.709\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is FKM Fluorocarbon good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to fuels (including ethanol blends), engine and gear oils, aromatic and halogenated hydrocarbons, many acids, and high heat. Avoid ketones (acetone, MEK), hot water or steam in continuous service, Skydrol-type phosphate-ester fluids, and amines.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"1 (Single)","offer_id":48853644148941,"sku":"OR.43p4x3p6.1.BI.MET.V70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":48853644181709,"sku":"OR.43p4x3p6.2.BI.MET.V70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":48853644214477,"sku":"OR.43p4x3p6.3.BI.MET.V70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-024_e8925321-7c7a-447e-8b52-6c1f500de20a.jpg?v=1794350718"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-18p3mm-id-x-3p6mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 18.3mm ID x 3.6mm CS (0.720\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 18.3mm ID x 3.6mm CS (0.720\" x 0.142\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 25.5mm (1.004\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 mm \/ 0.720 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25.5 mm \/ 1.004 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 18.3mm ID x 3.6mm CS (0.720\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 18.3mm ID x 3.6mm CS (0.720\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"10-Pack","offer_id":48853739864269,"sku":"OR.18p3x3p6.10.BI.MET.B70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48853739897037,"sku":"OR.18p3x3p6.20.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853739929805,"sku":"OR.18p3x3p6.25.BI.MET.B70","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_b47a2579-06fa-4faa-b8fa-a5b7b4fc04f5.jpg?v=1794352045"},{"product_id":"buna-n-nitrile-metric-o-ring-70a-durometer-35p6mm-id-x-3p6mm-cs","title":"Buna-N Nitrile Metric O-Ring, 70A Durometer, 35.6mm ID x 3.6mm CS (1.402\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 35.6mm ID x 3.6mm CS (1.402\" x 0.142\") size, molded in 70A Buna-N Nitrile. Its outside diameter is 42.8mm (1.685\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e35.6 mm \/ 1.402 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e42.8 mm \/ 1.685 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBuna-N Nitrile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-40°F to +250°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across pumps, valves, hydraulic and pneumatic fittings, filter housings, gearboxes, compressors, pressure washers and plumbing. If your manual, parts list or old ring calls for 35.6mm ID x 3.6mm CS (1.402\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Buna-N Nitrile\u003c\/h3\u003e\u003cp\u003eBuna-N is the all-round workhorse of sealing: tough, abrasion resistant and the right default for oil, hydraulic and water service. Recommended for petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Not recommended for brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 35.6mm ID x 3.6mm CS (1.402\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Buna-N Nitrile good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to petroleum oils, hydraulic fluid, greases, water, air, and most fuels. Avoid brake fluid (glycol), ketones such as acetone or MEK, and long-term sunlight or ozone exposure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"20-Pack","offer_id":48853791146189,"sku":"OR.35p6x3p6.20.BI.MET.B70","price":29.99,"currency_code":"USD","in_stock":true},{"title":"25-Pack","offer_id":48853791178957,"sku":"OR.35p6x3p6.25.BI.MET.B70","price":31.99,"currency_code":"USD","in_stock":true},{"title":"50-Pack","offer_id":48853791211725,"sku":"OR.35p6x3p6.50.BI.MET.B70","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-021_81948cc0-80dd-48f3-980b-76df042228bb.jpg?v=1794352761"},{"product_id":"red-silicone-metric-o-ring-70a-durometer-18p3mm-id-x-3p6mm-cs","title":"Red Silicone Metric O-Ring, 70A Durometer, 18.3mm ID x 3.6mm CS (0.720\" x 0.142\") - Precision-Molded Replacement Sealing Ring","description":"\u003cp\u003e\u003cstrong\u003eFINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBecause standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.\u003c\/p\u003e\u003cp\u003eChasing a leak, a slow drip or a pressure loss you cannot track down? A flattened, hardened or wrong-size o-ring lets fluid weep past the joint, drops pressure, and can damage the parts around it.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company o-ring is a standard 18.3mm ID x 3.6mm CS (0.720\" x 0.142\") size, molded in 70A Red Silicone. Its outside diameter is 25.5mm (1.004\"). \u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePart type\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMetric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInside diameter (ID)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e18.3 mm \/ 0.720 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCross-section (CS)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 mm \/ 0.142 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOutside diameter (OD)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25.5 mm \/ 1.004 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSilicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardness\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70A Shore A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColor\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eTemperature range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e-103°F to +446°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eThis size is used across food and beverage equipment, coffee and espresso machines, ovens and dryers, lighting fixtures, medical devices and electrical enclosures. If your manual, parts list or old ring calls for 18.3mm ID x 3.6mm CS (0.720\" x 0.142\"), this is the part.\u003c\/p\u003e\u003ch3\u003eWhy Silicone\u003c\/h3\u003e\u003cp\u003eSilicone stays flexible from deep cold to high heat and resists compression set, ideal for static seals in ovens, lights, coffee and beverage equipment, and enclosures. Recommended for extreme hot and cold temperatures, air, water, food and beverage contact, and outdoor weathering. Not recommended for dynamic or abrasive service, steam above its rating, and low-aniline petroleum oils and fuels.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eClean the groove and mating surfaces and check them for nicks or burrs. Lubricate the new o-ring, then roll it into the groove without twisting it; pass it over threads or sharp edges on a piece of tape or a plastic sleeve so it is not cut. Tighten to the normal torque. A correct o-ring seals by squeeze, so more torque is not better.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e A thin coat of \u003ca href=\"https:\/\/beaverislandparts.com\/products\/aqua-flex-food-grade-silicone-lubricant-50g\" target=\"_blank\" rel=\"noopener\"\u003eAqua Flex\u003c\/a\u003e silicone lubricant eases installation, protects the seal on first start-up and extends its life.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEvery dimension published.\u003c\/b\u003e Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my equipment?\u003c\/b\u003e\u003cbr\u003eA: It fits any groove or fitting that calls for a 18.3mm ID x 3.6mm CS (0.720\" x 0.142\") o-ring. Size, not brand, determines fit for standard o-rings. Measure the old o-ring's inside diameter and cross-section with calipers, or better, measure the groove, because a used ring stretches and flattens. Match the material to the fluid: the right size in the wrong rubber will still fail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: What is Silicone good for?\u003c\/b\u003e\u003cbr\u003eA: It is suited to extreme hot and cold temperatures, air, water, food and beverage contact, and outdoor weathering. Avoid dynamic or abrasive service, steam above its rating, and low-aniline petroleum oils and fuels.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Can I install it myself?\u003c\/b\u003e\u003cbr\u003eA: Yes. Most o-ring replacements take only a pick tool, a clean rag and lubricant. Release pressure, drain the system if needed, remove the old ring, and follow the installation notes above. If it is your first time, take a photo before you take anything apart.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"5-Pack","offer_id":48854087991501,"sku":"OR.18p3x3p6.5.BI.MET.S70","price":26.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":48854088024269,"sku":"OR.18p3x3p6.10.BI.MET.S70","price":27.99,"currency_code":"USD","in_stock":true},{"title":"20-Pack","offer_id":48854088057037,"sku":"OR.18p3x3p6.20.BI.MET.S70","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-022_c59fa48b-6ddd-446d-a488-d8a2dc147d26.jpg?v=1794357099"}],"url":"https:\/\/beaverislandparts.com\/collections\/metric-o-rings-3p6mm-cs.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}