{"title":"Rexroth Hydraulic Seal Kits","description":"\u003cp\u003eAftermarket hydraulic cylinder seal kits for Rexroth equipment, listed by OEM kit number. Each listing gives the machine models, rod and bore sizes and the kit contents.\u003c\/p\u003e","products":[{"product_id":"r961008000-hydraulic-cylinder-seal-kit-fits-rexroth-12mm-rod-x-25mm-bore","title":"R961008000 Hydraulic Cylinder Seal Kit Fits Rexroth, 12mm rod x 25mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008000. It is sized for a 12mm rod x 25mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12mm rod x 25mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008000. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008000.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855136829645,"sku":"SK.R961008000-REX.BI.OEM.B70","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_0c1028e2-94f0-42c7-ae8b-f4e651acfbf4.jpg?v=1794374794"},{"product_id":"r961008002-hydraulic-cylinder-seal-kit-fits-rexroth-14mm-rod-x-32mm-bore","title":"R961008002 Hydraulic Cylinder Seal Kit Fits Rexroth, 14mm rod x 32mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008002. It is sized for a 14mm rod x 32mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14mm rod x 32mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008002. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008002.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855136862413,"sku":"SK.R961008002-REX.BI.OEM.B70","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_d1d52932-bb67-43a3-8520-03b7438c9b8c.jpg?v=1794374797"},{"product_id":"r961008003-hydraulic-cylinder-seal-kit-fits-rexroth-22mm-rod-x-32mm-bore","title":"R961008003 Hydraulic Cylinder Seal Kit Fits Rexroth, 22mm rod x 32mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008003. It is sized for a 22mm rod x 32mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 32mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008003. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008003.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855136895181,"sku":"SK.R961008003-REX.BI.OEM.B70","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_a1b554ff-6026-4489-8966-9956bd4b0d9e.jpg?v=1794374797"},{"product_id":"r961008005-hydraulic-cylinder-seal-kit-fits-rexroth-22mm-rod-x-40mm-bore","title":"R961008005 Hydraulic Cylinder Seal Kit Fits Rexroth, 22mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008005. It is sized for a 22mm rod x 40mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008005. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008005.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855136927949,"sku":"SK.R961008005-REX.BI.OEM.B70","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_00fa6740-c340-4a02-9859-85b13069b283.jpg?v=1794374798"},{"product_id":"r961008006-hydraulic-cylinder-seal-kit-fits-rexroth-28mm-rod-x-40mm-bore","title":"R961008006 Hydraulic Cylinder Seal Kit Fits Rexroth, 28mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008006. It is sized for a 28mm rod x 40mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008006. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008006.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855136960717,"sku":"SK.R961008006-REX.BI.OEM.B70","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_0e00178a-aaa7-4f2e-9f3d-142fd90b3430.jpg?v=1794374800"},{"product_id":"r961008008-hydraulic-cylinder-seal-kit-fits-rexroth-28mm-rod-x-50mm-bore","title":"R961008008 Hydraulic Cylinder Seal Kit Fits Rexroth, 28mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008008. It is sized for a 28mm rod x 50mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008008. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008008.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137026253,"sku":"SK.R961008008-REX.BI.OEM.B70","price":88.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_108307cf-c818-466d-8c24-1dde23780c0b.jpg?v=1794374802"},{"product_id":"r961008010-hydraulic-cylinder-seal-kit-fits-rexroth-28mm-rod-x-63mm-bore","title":"R961008010 Hydraulic Cylinder Seal Kit Fits Rexroth, 28mm rod x 63mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008010. It is sized for a 28mm rod x 63mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28mm rod x 63mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008010. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008010.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137091789,"sku":"SK.R961008010-REX.BI.OEM.B70","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_9ca69c45-66a2-4802-bb30-b1e747504fd6.jpg?v=1794374805"},{"product_id":"r961008018-hydraulic-cylinder-seal-kit-fits-rexroth-70mm-rod-x-100mm-bore","title":"R961008018 Hydraulic Cylinder Seal Kit Fits Rexroth, 70mm rod x 100mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008018. It is sized for a 70mm rod x 100mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70mm rod x 100mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008018. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008018.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137124557,"sku":"SK.R961008018-REX.BI.OEM.B70","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_a87c8f98-dcae-4d98-bf20-744f882c0eb9.jpg?v=1794374807"},{"product_id":"r961008020-hydraulic-cylinder-seal-kit-fits-rexroth-70mm-rod-x-125mm-bore","title":"R961008020 Hydraulic Cylinder Seal Kit Fits Rexroth, 70mm rod x 125mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008020. It is sized for a 70mm rod x 125mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70mm rod x 125mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008020. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008020.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137157325,"sku":"SK.R961008020-REX.BI.OEM.B70","price":164.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_0b6d90ca-5b41-4234-83b3-3965e8007022.jpg?v=1794374808"},{"product_id":"r961008078-hydraulic-cylinder-seal-kit-fits-rexroth-12mm-rod-x-25mm-bore","title":"R961008078 Hydraulic Cylinder Seal Kit Fits Rexroth, 12mm rod x 25mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008078. It is sized for a 12mm rod x 25mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008078\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e12mm rod x 25mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008078. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008078.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137190093,"sku":"SK.R961008078-REX.BI.OEM.B70","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_28782c1b-f0f7-4c41-9508-507816dd757f.jpg?v=1794374809"},{"product_id":"r961008080-hydraulic-cylinder-seal-kit-fits-rexroth-14mm-rod-x-32mm-bore","title":"R961008080 Hydraulic Cylinder Seal Kit Fits Rexroth, 14mm rod x 32mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008080. It is sized for a 14mm rod x 32mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e14mm rod x 32mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008080. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008080.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137222861,"sku":"SK.R961008080-REX.BI.OEM.B70","price":190.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_dee63ba2-cf16-487a-b90e-649625b80835.jpg?v=1794374810"},{"product_id":"r961008081-hydraulic-cylinder-seal-kit-fits-rexroth-22mm-rod-x-32mm-bore","title":"R961008081 Hydraulic Cylinder Seal Kit Fits Rexroth, 22mm rod x 32mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008081. It is sized for a 22mm rod x 32mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 32mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008081. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008081.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137255629,"sku":"SK.R961008081-REX.BI.OEM.B70","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_6d991ea0-93b7-45c1-a735-5de82f709bd0.jpg?v=1794374812"},{"product_id":"r961008083-hydraulic-cylinder-seal-kit-fits-rexroth-22mm-rod-x-40mm-bore","title":"R961008083 Hydraulic Cylinder Seal Kit Fits Rexroth, 22mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008083. It is sized for a 22mm rod x 40mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008083\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008083. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008083.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137288397,"sku":"SK.R961008083-REX.BI.OEM.B70","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_00eba374-1db8-4714-a9d3-8e6bbc5f4d64.jpg?v=1794374813"},{"product_id":"r961008085-hydraulic-cylinder-seal-kit-fits-rexroth-22mm-rod-x-50mm-bore","title":"R961008085 Hydraulic Cylinder Seal Kit Fits Rexroth, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008085. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008085\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008085. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008085.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137353933,"sku":"SK.R961008085-REX.BI.OEM.B70","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_255d28cd-8e88-41e2-8ccc-80b2ce15e962.jpg?v=1794374815"},{"product_id":"r961008086-hydraulic-cylinder-seal-kit-fits-rexroth-28mm-rod-x-50mm-bore","title":"R961008086 Hydraulic Cylinder Seal Kit Fits Rexroth, 28mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008086. It is sized for a 28mm rod x 50mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008086\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008086. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008086.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137386701,"sku":"SK.R961008086-REX.BI.OEM.B70","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_40906bf5-2a32-433e-bf77-43e0a100ba63.jpg?v=1794374818"},{"product_id":"r961008088-hydraulic-cylinder-seal-kit-fits-rexroth-28mm-rod-x-63mm-bore","title":"R961008088 Hydraulic Cylinder Seal Kit Fits Rexroth, 28mm rod x 63mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008088. It is sized for a 28mm rod x 63mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008088\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e28mm rod x 63mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008088. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008088.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137419469,"sku":"SK.R961008088-REX.BI.OEM.B70","price":95.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_3397ff48-aa55-4e8b-ad1c-4594a378a598.jpg?v=1794374819"},{"product_id":"r961008096-hydraulic-cylinder-seal-kit-fits-rexroth-70mm-rod-x-100mm-bore","title":"R961008096 Hydraulic Cylinder Seal Kit Fits Rexroth, 70mm rod x 100mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Rexroth leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Rexroth seal kit R961008096. It is sized for a 70mm rod x 100mm bore cylinder. Kit contents: NBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eR961008096\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRexroth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70mm rod x 100mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNBR Orings, Piston \u0026amp; Rod Wear rings, u cup, Piston seal, End \u0026amp; Head seal, Rod seal, Rod Wiper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Rexroth part number R961008096. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Rexroth kit R961008096.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Rexroth. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855137452237,"sku":"SK.R961008096-REX.BI.OEM.B70","price":152.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_08914249-8adc-415f-8b7b-d78932c70df9.jpg?v=1794374819"}],"url":"https:\/\/beaverislandparts.com\/collections\/rexroth-hydraulic-seal-kits.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}