{"title":"Toyota Hydraulic Seal Kits","description":"\u003cp\u003eAftermarket hydraulic cylinder seal kits for Toyota equipment, listed by OEM kit number. Each listing gives the machine models, rod and bore sizes and the kit contents.\u003c\/p\u003e","products":[{"product_id":"04431-30091-71-lift-cylinder-seal-kit-fits-toyota-60mm-rod-x-90mm-bore","title":"04431-30091-71 lift Cylinder Seal Kit Fits Toyota, 60mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04431-30091-71, for the lift cylinder. It is sized for a 60mm rod x 90mm bore cylinder. Kit contents: Wiper, U seal and 2 pcs Piston U seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04431-30091-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003elift Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e60mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and 2 pcs Piston U seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04431-30091-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04431-30091-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855029940429,"sku":"SK.04431-30091-71-TOY.BI.OEM","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_da147df1-a59a-4613-8f89-134005d1c00d.jpg?v=1794370524"},{"product_id":"04433-10010-71-lift-cylinder-seal-kit-fits-toyota-40mm-rod-x-60mm-bore","title":"04433-10010-71 lift Cylinder Seal Kit Fits Toyota, 40mm rod x 60mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-10010-71, for the lift cylinder. It is sized for a 40mm rod x 60mm bore cylinder. Kit contents: Wiper, U seal and Piston U seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-10010-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003elift Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 60mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and Piston U seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-10010-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-10010-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855029973197,"sku":"SK.04433-10010-71-TOY.BI.OEM","price":82.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_ca99d327-0854-47eb-9b13-5459949fb06a.jpg?v=1794370525"},{"product_id":"04433-10020-71-lift-cylinder-seal-kit-fits-toyota-40mm-rod-x-60mm-bore","title":"04433-10020-71 lift Cylinder Seal Kit Fits Toyota, 40mm rod x 60mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-10020-71, for the lift cylinder. It is sized for a 40mm rod x 60mm bore cylinder. Kit contents: 2pc Wiper, 2pc Ucup, buffer, wear band and 2pc oring seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-10020-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003elift Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 60mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 2pc Ucup, buffer, wear band and 2pc oring seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-10020-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-10020-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030005965,"sku":"SK.04433-10020-71-TOY.BI.OEM","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_b8497335-5a57-4e12-8200-4e9692f4a2c0.jpg?v=1794370526"},{"product_id":"04433-10101-71-lift-cylinder-seal-kit-fits-toyota-40mm-rod-x-60mm-bore","title":"04433-10101-71 lift Cylinder Seal Kit Fits Toyota, 40mm rod x 60mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-10101-71, for the lift cylinder. It is sized for a 40mm rod x 60mm bore cylinder. Kit contents: 2pc Wiper, 2pc Ucup, Buffer and 2pc oring seals New.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-10101-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003elift Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 60mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 2pc Ucup, Buffer and 2pc oring seals New\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-10101-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-10101-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030038733,"sku":"SK.04433-10101-71-TOY.BI.OEM","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_5c27d7d2-191d-4064-a487-056d2dd2f94a.jpg?v=1794370527"},{"product_id":"04433-20011-71-steering-cylinder-seal-kit-fits-toyota-50mm-rod-x-75mm-bore","title":"04433-20011-71 Steering Cylinder Seal Kit Fits Toyota, 50mm rod x 75mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-20011-71, for the steering cylinder. It is sized for a 50mm rod x 75mm bore cylinder. Kit contents: 2pc Wiper, 2pc Ucup, 2pc oring and 6pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-20011-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 75mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 2pc Ucup, 2pc oring and 6pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-20011-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-20011-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030071501,"sku":"SK.04433-20011-71-TOY.BI.OEM","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_8d95a6a8-2d76-4f51-ba12-1b44eb919584.jpg?v=1794370530"},{"product_id":"04433-20030-71-steering-cylinder-seal-kit-fits-toyota-50mm-rod-x-80mm-bore","title":"04433-20030-71 Steering Cylinder Seal Kit Fits Toyota, 50mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-20030-71, for the steering cylinder. It is sized for a 50mm rod x 80mm bore cylinder. Kit contents: 2pc Wiper, 2pc Ucup, wear band, 3pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-20030-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 2pc Ucup, wear band, 3pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-20030-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-20030-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030104269,"sku":"SK.04433-20030-71-TOY.BI.OEM","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_79278462-ecae-4dbc-a9c7-74c321aa032f.jpg?v=1794370530"},{"product_id":"04433-u1010-71-steering-cylinder-seal-kit-fits-toyota-steering-cylinder-42-6fgcu15-18-40mm","title":"04433-U1010-71 Steering Cylinder Seal Kit Fits Toyota Steering Cylinder 42-6FGCU15-18, 40mm rod x 2-3\/8\" bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-U1010-71, for the steering cylinder on Toyota Steering Cylinder 42-6FGCU15-18. It is sized for a 40mm rod x 2-3\/8\" bore cylinder. Kit contents: 2pc Wiper, 2pc Ucup, wear band, 3pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-U1010-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota Steering Cylinder 42-6FGCU15-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 2-3\/8\" bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 2pc Ucup, wear band, 3pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-U1010-71 on Toyota Steering Cylinder 42-6FGCU15-18. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-U1010-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030137037,"sku":"SK.04433-U1010-71-TOY.BI.OEM","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_b5b91c36-b099-46ba-a5a7-cf900d38b5b4.jpg?v=1794370532"},{"product_id":"04433-u2040-71-forklift-cylinder-seal-kit-fits-toyota-50mm-rod-x-3in-bore","title":"04433-U2040-71 Forklift Cylinder Seal Kit Fits Toyota, 50mm rod x 3\" bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-U2040-71. It is sized for a 50mm rod x 3\" bore cylinder. Kit contents: 2pc Wiper, 2pc Ucup, wear band, 3pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-U2040-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 3\" bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 2pc Ucup, wear band, 3pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-U2040-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-U2040-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030169805,"sku":"SK.04433-U2040-71-TOY.BI.OEM","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_eec53e34-99d5-49ff-8d45-c2bbf03d212e.jpg?v=1794370532"},{"product_id":"04433-u2050-71-steering-cylinder-seal-kit-fits-toyota-50mm-rod-x-3-1-8in-bore","title":"04433-U2050-71 Steering Cylinder Seal Kit Fits Toyota, 50mm rod x 3-1\/8\" bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-U2050-71, for the steering cylinder. It is sized for a 50mm rod x 3-1\/8\" bore cylinder. Kit contents: Wiper, U seal and Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-U2050-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 3-1\/8\" bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-U2050-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-U2050-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030202573,"sku":"SK.04433-U2050-71-TOY.BI.OEM","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_2127183a-fa35-44a1-b2bc-d54c5262d267.jpg?v=1794370536"},{"product_id":"04433-u3010-71-forklift-cylinder-seal-kit-fits-toyota-50mm-rod-x-3-1-8in-bore","title":"04433-U3010-71 Forklift Cylinder Seal Kit Fits Toyota, 50mm rod x 3-1\/8\" bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04433-U3010-71. It is sized for a 50mm rod x 3-1\/8\" bore cylinder. Kit contents: Wiper, U seal and Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04433-U3010-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 3-1\/8\" bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04433-U3010-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04433-U3010-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030235341,"sku":"SK.04433-U3010-71-TOY.BI.OEM","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_fd4d0e4b-992f-4306-ac20-7e5eb6cb23e2.jpg?v=1794370536"},{"product_id":"04451-10070-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-40mm-bore","title":"04451-10070-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-10070-71. It is sized for a 22mm rod x 40mm bore cylinder. Kit contents: Wiper, V set and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-10070-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, V set and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-10070-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-10070-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030268109,"sku":"SK.04451-10070-71-TOY.BI.OEM.CI","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_516cb25f-993f-4384-969a-83526a371fd5.jpg?v=1794370537"},{"product_id":"04451-10090-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-40mm-bore","title":"04451-10090-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-10090-71. It is sized for a 22mm rod x 40mm bore cylinder. Kit contents: Wiper, V set and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-10090-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, V set and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-10090-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-10090-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030300877,"sku":"SK.04451-10090-71-TOY.BI.OEM.CI","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_917ff360-ec8d-467a-8035-9128aa4e27c5.jpg?v=1794370537"},{"product_id":"04451-10120-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-45mm-bore","title":"04451-10120-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 45mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-10120-71. It is sized for a 22mm rod x 45mm bore cylinder. Kit contents: Wiper, Ucup, oring and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-10120-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 45mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, oring and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-10120-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-10120-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030333645,"sku":"SK.04451-10120-71-TOY.BI.OEM.CI","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_72c778cf-4f70-4820-aa0d-9b3fc17cbb98.jpg?v=1794370541"},{"product_id":"04451-20100-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-20mm-bore","title":"04451-20100-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 20mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-20100-71. It is sized for a 22mm rod x 20mm bore cylinder. Kit contents: Wiper, V set and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-20100-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 20mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, V set and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-20100-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-20100-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030366413,"sku":"SK.04451-20100-71-TOY.BI.OEM.CI","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_e31e72d7-ade4-4139-bed5-df400dc1db2c.jpg?v=1794370542"},{"product_id":"04451-20101-71-steering-cylinder-seal-kit-fits-toyota-22mm-rod-x-50mm-bore","title":"04451-20101-71 Steering Cylinder Seal Kit Fits Toyota, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-20101-71, for the steering cylinder. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: Wiper, U seal and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-20101-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, U seal and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-20101-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-20101-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030399181,"sku":"SK.04451-20101-71-TOY.BI.OEM.CI","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_7257f5b8-0cf4-4319-86f3-c2aa77464ca4.jpg?v=1794370542"},{"product_id":"04451-20170-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-50mm-bore","title":"04451-20170-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-20170-71. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: Wiper, V set and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-20170-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, V set and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-20170-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-20170-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030431949,"sku":"SK.04451-20170-71-TOY.BI.OEM.CI","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_6955eb07-69e4-4e6a-9f1d-e662e9ea4c57.jpg?v=1794370543"},{"product_id":"04451-20171-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-50mm-bore","title":"04451-20171-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04451-20171-71. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: Wiper, Ucup, oring and Cast Iron Piston Ring.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04451-20171-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, oring and Cast Iron Piston Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04451-20171-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04451-20171-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030464717,"sku":"SK.04451-20171-71-TOY.BI.OEM.CI","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_439f665d-b67d-4f54-ade0-875cd1994566.jpg?v=1794370546"},{"product_id":"04455-u2010-71-forklift-cylinder-seal-kit-fits-toyota","title":"04455-U2010-71 Forklift Cylinder Seal Kit Fits Toyota - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04455-U2010-71. Kit contents: all orings and seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04455-U2010-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eall orings and seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04455-U2010-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04455-U2010-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030497485,"sku":"SK.04455-U2010-71-TOY.BI.OEM","price":53.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_27c14b3b-e61d-4c4b-9512-edade38ee427.jpg?v=1794370548"},{"product_id":"04456-10020-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-50mm-bore","title":"04456-10020-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-10020-71. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: Wiper, Ucup, oring and Piston seal.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-10020-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, oring and Piston seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-10020-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-10020-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030530253,"sku":"SK.04456-10020-71-TOY.BI.OEM","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_59a3e6d7-4343-4815-bdfb-4cd5fa85817c.jpg?v=1794370548"},{"product_id":"04456-10031-71-forklift-cylinder-seal-kit-fits-toyota-30mm-rod-x-55mm-bore","title":"04456-10031-71 Forklift Cylinder Seal Kit Fits Toyota, 30mm rod x 55mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-10031-71. It is sized for a 30mm rod x 55mm bore cylinder. Kit contents: 2pc Wiper, 4pc Ucup, wear band, 2pc oring, 2 pins and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-10031-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 55mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Wiper, 4pc Ucup, wear band, 2pc oring, 2 pins and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-10031-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-10031-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030563021,"sku":"SK.04456-10031-71-TOY.BI.OEM","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1eacc3b1-06c9-4fbd-9d04-d781c2cef6c0.jpg?v=1794370548"},{"product_id":"04456-10050-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-45mm-bore","title":"04456-10050-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 45mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-10050-71. It is sized for a 22mm rod x 45mm bore cylinder. Kit contents: Wiper, Ucup, 2pc Cast Iron Piston ring and 3pc oring seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-10050-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 45mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc Cast Iron Piston ring and 3pc oring seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-10050-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-10050-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030595789,"sku":"SK.04456-10050-71-TOY.BI.OEM.CI","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_8505638c-b858-4d1c-b5e2-d1dc7fc0de16.jpg?v=1794370552"},{"product_id":"04456-20010-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-40mm-bore","title":"04456-20010-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-20010-71. It is sized for a 22mm rod x 40mm bore cylinder. Kit contents: Wiper, Ucup, 2pc Cast Iron Piston ring, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-20010-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc Cast Iron Piston ring, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-20010-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-20010-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030628557,"sku":"SK.04456-20010-71-TOY.BI.OEM.CI","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_95481661-7b32-4e7a-9ea6-af58f59f3b09.jpg?v=1794370553"},{"product_id":"04456-20020-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-40mm-bore","title":"04456-20020-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 40mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-20020-71. It is sized for a 22mm rod x 40mm bore cylinder. Kit contents: Wiper, Ucup, 2pc Cast Iron Piston ring, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-20020-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 40mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc Cast Iron Piston ring, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-20020-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-20020-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030661325,"sku":"SK.04456-20020-71-TOY.BI.OEM.CI","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_e4d5a432-22c1-4f12-b1a3-5c6a1597fe32.jpg?v=1794370553"},{"product_id":"04456-20030-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-50mm-bore","title":"04456-20030-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-20030-71. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: Ucup, 2pc Cast Iron Piston ring, 3pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-20030-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eUcup, 2pc Cast Iron Piston ring, 3pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-20030-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-20030-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030694093,"sku":"SK.04456-20030-71-TOY.BI.OEM.CI","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_594159ee-6934-414c-af42-95088041e25b.jpg?v=1794370554"},{"product_id":"04456-20060-71-forklift-cylinder-seal-kit-fits-toyota-22mm-rod-x-50mm-bore","title":"04456-20060-71 Forklift Cylinder Seal Kit Fits Toyota, 22mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-20060-71. It is sized for a 22mm rod x 50mm bore cylinder. Kit contents: Wiper, Ucup, Cast Iron Piston ring, 3pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-20060-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, Cast Iron Piston ring, 3pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-20060-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-20060-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030726861,"sku":"SK.04456-20060-71-TOY.BI.OEM.CI","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_1818ce18-2621-4b6e-8c00-48f827bdf097.jpg?v=1794370557"},{"product_id":"04456-30010-71-forklift-cylinder-seal-kit-fits-toyota-25mm-rod-x-55mm-bore","title":"04456-30010-71 Forklift Cylinder Seal Kit Fits Toyota, 25mm rod x 55mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-30010-71. It is sized for a 25mm rod x 55mm bore cylinder. Kit contents: Wiper, Ucup, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-30010-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25mm rod x 55mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-30010-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-30010-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030759629,"sku":"SK.04456-30010-71-TOY.BI.OEM","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_4b6fe31f-7bb8-4819-abd9-8cc479fc793e.jpg?v=1794370558"},{"product_id":"04456-30011-71-forklift-cylinder-seal-kit-fits-toyota-25mm-rod-x-55mm-bore","title":"04456-30011-71 Forklift Cylinder Seal Kit Fits Toyota, 25mm rod x 55mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04456-30011-71. It is sized for a 25mm rod x 55mm bore cylinder. Kit contents: Wiper, Ucup, 2pc Cast Iron Piston ring, oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04456-30011-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25mm rod x 55mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc Cast Iron Piston ring, oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04456-30011-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04456-30011-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030792397,"sku":"SK.04456-30011-71-TOY.BI.OEM.CI","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_533311dd-b599-4b64-a6e7-6f87b6a952e2.jpg?v=1794370559"},{"product_id":"04651-10060-71-forklift-cylinder-seal-kit-fits-toyota-50mm-rod-x-80mm-bore","title":"04651-10060-71 Forklift Cylinder Seal Kit Fits Toyota, 50mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10060-71. It is sized for a 50mm rod x 80mm bore cylinder. Kit contents: Wiper And Piston U seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10060-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper And Piston U seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10060-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10060-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030825165,"sku":"SK.04651-10060-71-TOY.BI.OEM","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_70d43c96-c26a-4de2-a6bb-75efd0f38444.jpg?v=1794370559"},{"product_id":"04651-10132-71-forklift-cylinder-seal-kit-fits-toyota-30mm-rod-x-80mm-bore","title":"04651-10132-71 Forklift Cylinder Seal Kit Fits Toyota, 30mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10132-71. It is sized for a 30mm rod x 80mm bore cylinder. Kit contents: Wiper, 3 pc Ucup, pin and 2pc oring seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10132-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 3 pc Ucup, pin and 2pc oring seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10132-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10132-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030857933,"sku":"SK.04651-10132-71-TOY.BI.OEM","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_884b32fe-b09f-47ba-9aff-930f5ca8e395.jpg?v=1794370562"},{"product_id":"04651-10330-71-tilt-cylinder-seal-kit-fits-toyota-30mm-rod-x-70mm-bore","title":"04651-10330-71 Tilt Cylinder Seal Kit Fits Toyota, 30mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10330-71, for the tilt cylinder. It is sized for a 30mm rod x 70mm bore cylinder. Kit contents: Wiper, 3pc Ucup, 2oc oring, pin and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10330-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTilt Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 3pc Ucup, 2oc oring, pin and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10330-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10330-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030890701,"sku":"SK.04651-10330-71-TOY.BI.OEM","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_c0cc84d5-c779-46cd-9246-44fb45b1df5c.jpg?v=1794370563"},{"product_id":"04651-10333-71-forklift-cylinder-seal-kit-fits-toyota-30mm-rod-x-70mm-bore","title":"04651-10333-71 Forklift Cylinder Seal Kit Fits Toyota, 30mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10333-71. It is sized for a 30mm rod x 70mm bore cylinder. Kit contents: Wiper, 3pc Ucup, 2pc oring, pin and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10333-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 3pc Ucup, 2pc oring, pin and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10333-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10333-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030923469,"sku":"SK.04651-10333-71-TOY.BI.OEM","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_319eed96-497e-4bad-98be-b1729e050001.jpg?v=1794370564"},{"product_id":"04651-10334-71-tilt-cylinder-seal-kit-fits-toyota-30mm-rod-x-70mm-bore","title":"04651-10334-71 Tilt Cylinder Seal Kit Fits Toyota, 30mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10334-71, for the tilt cylinder. It is sized for a 30mm rod x 70mm bore cylinder. Kit contents: Wiper, 3pc Ucup, 2pc oring, pin and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10334-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCylinder\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTilt Cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 3pc Ucup, 2pc oring, pin and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10334-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10334-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855030956237,"sku":"SK.04651-10334-71-TOY.BI.OEM","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_f9e8adc0-3fad-4545-9f17-6b8f2f656379.jpg?v=1794370565"},{"product_id":"04651-10652-71-forklift-cylinder-seal-kit-fits-toyota-50mm-rod-x-65mm-bore","title":"04651-10652-71 Forklift Cylinder Seal Kit Fits Toyota, 50mm rod x 65mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10652-71. It is sized for a 50mm rod x 65mm bore cylinder. Kit contents: Wiper, 2pc Ucup, wear band, 3pc oring, clip, and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10652-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 65mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc Ucup, wear band, 3pc oring, clip, and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10652-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10652-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031054541,"sku":"SK.04651-10652-71-TOY.BI.OEM","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_feda2c31-61ad-42f9-a590-c2de03abf694.jpg?v=1794370568"},{"product_id":"04651-10662-71-forklift-cylinder-seal-kit-fits-toyota-50mm-rod-x-65mm-bore","title":"04651-10662-71 Forklift Cylinder Seal Kit Fits Toyota, 50mm rod x 65mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10662-71. It is sized for a 50mm rod x 65mm bore cylinder. Kit contents: Wiper, 2pc Ucup, wear band, 3pc oring, clip and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10662-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 65mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc Ucup, wear band, 3pc oring, clip and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10662-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10662-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031087309,"sku":"SK.04651-10662-71-TOY.BI.OEM","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_5cd744a7-c3db-4409-9063-25def67ee352.jpg?v=1794370569"},{"product_id":"04651-10671-71-forklift-cylinder-seal-kit-fits-toyota","title":"04651-10671-71 Forklift Cylinder Seal Kit Fits Toyota - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10671-71. Kit contents: Wiper, Ucup, 2pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10671-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10671-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10671-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031120077,"sku":"SK.04651-10671-71-TOY.BI.OEM","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_6db5ea34-da87-464f-9275-eece86ac7cf0.jpg?v=1794370570"},{"product_id":"04651-10870-71-forklift-cylinder-seal-kit-fits-toyota-70mm-rod-x-80mm-bore","title":"04651-10870-71 Forklift Cylinder Seal Kit Fits Toyota, 70mm rod x 80mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10870-71. It is sized for a 70mm rod x 80mm bore cylinder. Kit contents: Wiper, Ucup, wear band, 2pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10870-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e70mm rod x 80mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, wear band, 2pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10870-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10870-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031152845,"sku":"SK.04651-10870-71-TOY.BI.OEM","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_db52540b-9dcd-4f77-9050-8b8fed34ed8a.jpg?v=1794370571"},{"product_id":"04651-10871-71-forklift-cylinder-seal-kit-fits-toyota","title":"04651-10871-71 Forklift Cylinder Seal Kit Fits Toyota - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10871-71. Kit contents: Wiper, Ucup, 2pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10871-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10871-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10871-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031185613,"sku":"SK.04651-10871-71-TOY.BI.OEM","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_b8faea86-90e6-4b77-a423-e8e60661f9c0.jpg?v=1794370573"},{"product_id":"04651-10882-71-forklift-cylinder-seal-kit-fits-toyota-30mm-rod-x-70mm-bore","title":"04651-10882-71 Forklift Cylinder Seal Kit Fits Toyota, 30mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10882-71. It is sized for a 30mm rod x 70mm bore cylinder. Kit contents: Wiper, Ucup, oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10882-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10882-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10882-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031218381,"sku":"SK.04651-10882-71-TOY.BI.OEM","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_dba92588-87f5-47bd-9bbc-549018d2e442.jpg?v=1794370575"},{"product_id":"04651-10892-71-forklift-cylinder-seal-kit-fits-toyota-30mm-rod-x-70mm-bore","title":"04651-10892-71 Forklift Cylinder Seal Kit Fits Toyota, 30mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-10892-71. It is sized for a 30mm rod x 70mm bore cylinder. Kit contents: Wiper, 3pc Ucup, oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-10892-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 3pc Ucup, oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-10892-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-10892-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031251149,"sku":"SK.04651-10892-71-TOY.BI.OEM","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_0ad3b6cb-d80c-48dd-9ec8-2805a2eab4d5.jpg?v=1794370575"},{"product_id":"04651-11032-71-forklift-cylinder-seal-kit-fits-toyota-35mm-rod-x-50mm-bore","title":"04651-11032-71 Forklift Cylinder Seal Kit Fits Toyota, 35mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11032-71. It is sized for a 35mm rod x 50mm bore cylinder. Kit contents: Wiper, Ucup, wear band, oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11032-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e35mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, wear band, oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11032-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11032-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031283917,"sku":"SK.04651-11032-71-TOY.BI.OEM","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_2fc1eae4-a380-48da-b85e-44695116b2d4.jpg?v=1794370576"},{"product_id":"04651-11061-71-forklift-cylinder-seal-kit-fits-toyota-40mm-rod-x-50mm-bore","title":"04651-11061-71 Forklift Cylinder Seal Kit Fits Toyota, 40mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11061-71. It is sized for a 40mm rod x 50mm bore cylinder. Kit contents: Wiper, 2pc Ucup, wear band, 2pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11061-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc Ucup, wear band, 2pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11061-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11061-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031316685,"sku":"SK.04651-11061-71-TOY.BI.OEM","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_dc12ecea-18f4-4ecf-97e2-bb57f0d3e87d.jpg?v=1794370578"},{"product_id":"04651-11250-71-forklift-cylinder-seal-kit-fits-toyota-75mm-rod-x-90mm-bore","title":"04651-11250-71 Forklift Cylinder Seal Kit Fits Toyota, 75mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11250-71. It is sized for a 75mm rod x 90mm bore cylinder. Kit contents: Wiper, Ucup, wear band, 2pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11250-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, wear band, 2pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11250-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11250-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031349453,"sku":"SK.04651-11250-71-TOY.BI.OEM","price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_f724b092-7e82-46b9-bb4c-8192ef0a4f1e.jpg?v=1794370581"},{"product_id":"04651-11261-71-forklift-cylinder-seal-kit-fits-toyota-35mm-rod-x-50mm-bore","title":"04651-11261-71 Forklift Cylinder Seal Kit Fits Toyota, 35mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11261-71. It is sized for a 35mm rod x 50mm bore cylinder. Kit contents: Wiper, Ucup, wear band, 2pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11261-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e35mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, wear band, 2pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11261-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11261-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031382221,"sku":"SK.04651-11261-71-TOY.BI.OEM","price":63.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_cc7937b0-541a-4771-b485-a5932209b7e2.jpg?v=1794370581"},{"product_id":"04651-11270-71-forklift-cylinder-seal-kit-fits-toyota-75mm-rod-x-90mm-bore","title":"04651-11270-71 Forklift Cylinder Seal Kit Fits Toyota, 75mm rod x 90mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11270-71. It is sized for a 75mm rod x 90mm bore cylinder. Kit contents: Wiper, Ucup, wear band, 3pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11270-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e75mm rod x 90mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, wear band, 3pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11270-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11270-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031414989,"sku":"SK.04651-11270-71-TOY.BI.OEM","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_93dbceb4-b820-49a2-bb31-35c50b25ad49.jpg?v=1794370581"},{"product_id":"04651-11271-71-forklift-cylinder-seal-kit-fits-toyota","title":"04651-11271-71 Forklift Cylinder Seal Kit Fits Toyota - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11271-71. Kit contents: Wiper, Ucup, 3pc oring and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11271-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 3pc oring and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11271-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11271-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031447757,"sku":"SK.04651-11271-71-TOY.BI.OEM","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_ab80ee88-94e0-4047-a0d8-5685b6f9d3bc.jpg?v=1794370584"},{"product_id":"04651-11290-71-forklift-cylinder-seal-kit-fits-toyota-40mm-rod-x-50mm-bore","title":"04651-11290-71 Forklift Cylinder Seal Kit Fits Toyota, 40mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11290-71. It is sized for a 40mm rod x 50mm bore cylinder. Kit contents: Wiper, 2pc Ucup, wear band, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11290-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc Ucup, wear band, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11290-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11290-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031480525,"sku":"SK.04651-11290-71-TOY.BI.OEM","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_7c48d69a-7eb7-4fcc-8dcd-f01f31153c0e.jpg?v=1794370585"},{"product_id":"04651-11291-71-forklift-cylinder-seal-kit-fits-toyota-40mm-rod-x-50mm-bore","title":"04651-11291-71 Forklift Cylinder Seal Kit Fits Toyota, 40mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11291-71. It is sized for a 40mm rod x 50mm bore cylinder. Kit contents: Wiper, 2pc Ucup, wear band, oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11291-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc Ucup, wear band, oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11291-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11291-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031513293,"sku":"SK.04651-11291-71-TOY.BI.OEM","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_403bfcb2-6323-4eb9-a615-65f148fbd733.jpg?v=1794370586"},{"product_id":"04651-11300-71-forklift-cylinder-seal-kit-fits-toyota-50mm-rod-x-65mm-bore","title":"04651-11300-71 Forklift Cylinder Seal Kit Fits Toyota, 50mm rod x 65mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11300-71. It is sized for a 50mm rod x 65mm bore cylinder. Kit contents: 2pc Rod Ucup, wear band, 3pc oring, clip and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11300-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e50mm rod x 65mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2pc Rod Ucup, wear band, 3pc oring, clip and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11300-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11300-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031546061,"sku":"SK.04651-11300-71-TOY.BI.OEM","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_62db63f1-ed74-4dc0-a6c5-64c9a58ab962.jpg?v=1794370586"},{"product_id":"04651-11390-71-forklift-cylinder-seal-kit-fits-toyota-40mm-rod-x-50mm-bore","title":"04651-11390-71 Forklift Cylinder Seal Kit Fits Toyota, 40mm rod x 50mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-11390-71. It is sized for a 40mm rod x 50mm bore cylinder. Kit contents: Wiper, 2pc Ucup, wear band, 2pc oring and backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-11390-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e40mm rod x 50mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, 2pc Ucup, wear band, 2pc oring and backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-11390-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-11390-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031578829,"sku":"SK.04651-11390-71-TOY.BI.OEM","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_9010251e-a590-4fae-ad5a-c84db6da8b0e.jpg?v=1794370589"},{"product_id":"04651-20132-71-forklift-cylinder-seal-kit-fits-toyota-60mm-rod-x-70mm-bore","title":"04651-20132-71 Forklift Cylinder Seal Kit Fits Toyota, 60mm rod x 70mm bore - Aftermarket Replacement","description":"\u003cp\u003eIs a hydraulic cylinder on your Toyota leaking at the rod, drifting under load, or losing power? Worn seals are almost always the cause, and resealing the cylinder brings it back to full holding force for a fraction of the cost of a new or rebuilt cylinder.\u003c\/p\u003e\u003cp\u003eThis Beaver Island Parts Company kit is an aftermarket replacement for Toyota seal kit 04651-20132-71. It is sized for a 60mm rod x 70mm bore cylinder. Kit contents: Wiper, Ucup, 2pc wear band, 3pc oring, clip and 2pc backup seals.\u003c\/p\u003e\u003ch3\u003eKit Details\u003c\/h3\u003e\u003ctable class=\"bi-specs\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOEM reference\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e04651-20132-71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRod x bore\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e60mm rod x 70mm bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWiper, Ucup, 2pc wear band, 3pc oring, clip and 2pc backup seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eWhat It Fits\u003c\/h3\u003e\u003cp\u003eReplaces Toyota part number 04651-20132-71. Always confirm the kit number against your machine's parts book or the stamping on the cylinder, and measure the rod and bore if the cylinder has been rebuilt before.\u003c\/p\u003e\u003ch3\u003eYou Can Do This Repair\u003c\/h3\u003e\u003cp\u003eA cylinder reseal is well within reach of a careful owner with a shop. Lower or block every implement and relieve pressure, then remove the cylinder or support it securely. Unthread the gland, pull the rod and piston, and lay out the old seals in order as a reference. Clean every groove, inspect the rod and bore for scoring, then install the new seals with a blunt seal pick (never a screwdriver). Warming polyurethane seals in hot water makes them easier to seat. Lubricate everything with clean hydraulic oil and torque the piston nut and gland to spec.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Photograph the seal stack before you remove it, and keep the old seals until the cylinder is back in service. Matching profiles side by side removes all the guesswork.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShipping:\u003c\/b\u003e This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.\u003c\/p\u003e\u003ch3\u003eWhy Buy From Beaver Island Parts Company\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClear fitment information.\u003c\/b\u003e OEM reference numbers and every detail we have are listed up front so you can confirm fit before you buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInspected, packed and labeled by us.\u003c\/b\u003e Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReal people who answer fitment questions.\u003c\/b\u003e We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReplacement guarantee.\u003c\/b\u003e If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eQ: Is this an OEM kit?\u003c\/b\u003e\u003cbr\u003eA: No. It is an aftermarket kit built to replace Toyota kit 04651-20132-71.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: Will this fit my machine?\u003c\/b\u003e\u003cbr\u003eA: Match the kit number on your parts book or cylinder. If the cylinder has been rebuilt with non-original components, measure the rod and bore and contact us before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eQ: When will it ship?\u003c\/b\u003e\u003cbr\u003eA: It ships from our facility in about 10 business days, then transits by the carrier service you choose.\u003c\/p\u003e\u003cp\u003eNote: Beaver Island Parts Company is not affiliated with Toyota. All brand names, model numbers and part numbers referenced are used solely to confirm compatibility and are the trademarks of their respective owners.\u003c\/p\u003e","brand":"Beaver Island Parts Company","offers":[{"title":"Default Title","offer_id":48855031611597,"sku":"SK.04651-20132-71-TOY.BI.OEM","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/8110\/0237\/files\/IMG-060_edccba96-4db2-45fd-8708-19188cc07eb3.jpg?v=1794370591"}],"url":"https:\/\/beaverislandparts.com\/collections\/toyota-hydraulic-seal-kits.oembed","provider":"Beaver Island Parts Company","version":"1.0","type":"link"}