Wear Guide Ring 63 x 69 x 30mm (2.480" x 2.717" x 1.181")

FINAL SALE - NO RETURNS. THIS IS A STANDARD CATALOGUE SIZE; CONFIRM YOUR DIMENSIONS AND MATERIAL BEFORE ORDERING.

Because standard sizes are chosen by measurement rather than by machine model, they ship as final sale. If we send the wrong item, or it arrives damaged or defective, we replace it free of charge, and that never changes.

Is a cylinder piston or rod scoring the bore? Wear rings guide the piston and rod, absorb side load, and keep metal from touching metal.

This Beaver Island Parts Company part is a guide ring (wear band) that centers the piston or rod and carries side loads, measuring 63 x 69 x 30mm (2.480" x 2.717" x 1.181").

Specifications

What It Fits

Used in hydraulic and pneumatic cylinders on mobile and industrial equipment. If your parts list or the old seal reads 63 x 69 x 30mm, this is the size.

You Can Do This Repair

Clean the groove, wrap the ring into place with the cut joint positioned away from the main load, and lubricate with hydraulic oil.

Pro Tip: Replace wear rings at every reseal; worn guides are what let new seals fail early.

Shipping: This part is special-ordered and packed for you. It ships from our facility in about 10 business days, then transits by the carrier service you choose at checkout. The estimated delivery date shown on this page includes that lead time.

Why Buy From Beaver Island Parts Company

• Every dimension published. Size, material, hardness and temperature rating are listed up front so you can confirm fit before you buy, not after.
• Inspected, packed and labeled by us. Each order is checked and repacked in a bag labeled with the part's size and material, so it never gets lost in a parts bin.
• Real people who answer fitment questions. We are an American family-owned and operated small business. Send us your measurements or model number and we will help you confirm the right part.
• Replacement guarantee. If we ship the wrong item, or it arrives damaged or defective, we replace it free of charge.

Frequently Asked Questions

Q: How do I know this is the right size?
A: Seals are sized by measurement: inside diameter, outside diameter and height. Measure the shaft and bore, not just the old seal, which may be worn or distorted. This part measures 63 x 69 x 30mm.

Q: Can I do this repair myself?
A: Yes, with basic hand tools and patience. Clean everything, work without sharp tools near the sealing lips, lubricate before assembly, and press seals in square. The installation notes above walk through the key steps.

Q: When will it ship?
A: It ships from our facility in about 10 business days, then transits by the carrier service you choose.